![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Coast 2 Coast in 61 mins.
Join Date: Jul 2004
Location: Canton, Illinois
Posts: 33
|
Non-Chevy Power in our 71 C10
Hey Guys/Gals: I dont want to step on anyones toes, but have any of you swapped in a non-chevy powerplant into one of these babes, my son and I have looked at the dozen or so that run around our area and they are basically the same once the hood is popped. We are keeping the 69 C20 in the chevy family, it has a 327 installed and that is staying put. But for the 71 I kinda am leaning towards a 500 Caddy motor, or even a 455 buick, any thoughts or ideas on this....... Please no curses or voodoo placed on my soul
![]() ![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2004
Location: Gainesville, Fl
Posts: 382
|
I have thought about that to... then pure wisdom came to me and said NO, HELL NO
:-) ha ha jk.
__________________
Man I need another 67-72!!! ![]() |
![]() |
![]() |
![]() |
#3 |
Why Buy New?
Join Date: Sep 2004
Location: Locust Grove, Oklahoma
Posts: 60
|
i myself have seen a 455 pontiac in a '67. the guy was using it to tow his race car, said it had all the tourqe he needed!
__________________
'71 GMC 1/2 Ton LWB '71 Chevy 3/4 ton Longhorn |
![]() |
![]() |
![]() |
#4 |
Coast 2 Coast in 61 mins.
Join Date: Jul 2004
Location: Canton, Illinois
Posts: 33
|
Thisolechevy........thats what my son keeps hoping will happen to me, we have a 40 over 454 on an engine stand its driving him nuts to see it sitting there and not in the engine bay....LOL
|
![]() |
![]() |
![]() |
#5 |
huh?
![]() Join Date: May 2000
Location: Washington, Illinois
Posts: 5,692
|
I think there are a few caddy powered rigs on here. And I've heard of 455 installs as well. Personally, if I had all the cash in the world...I'd throw a vintage hillborn injected 426 hemi in one
![]() ![]()
__________________
Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay |
![]() |
![]() |
![]() |
#6 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
I have a caddy in one of my trucks. It STILL isn't done, but that is from a major lack of funding...not from the swap being too hard.
Check out one of my sites on the topic with how to and why. http://www.geocities.com/caddyoneton/ |
![]() |
![]() |
![]() |
#7 | |
Registered User
![]() Join Date: Apr 2004
Location: The Other Maine!
Posts: 2,236
|
![]() Quote:
and off the line it surprises v-8 Stangs! The Buick 455 I ran in a 80 vette Body and they have most of the torque of the caddy except with the roller rockers it would still rev up to 7000 rpm's all day at the drags without problems. The caddy is done at 4600! The Buick is a better engine if you wish to haul FAST. The Caddy motor gets better gas mileage than a Chevy 350 due to the fact it hardly has to work. One of the best things about either swap is the dist. is in the front and this makes it easier to work on. The spark plugs are also above the exhaust making putting in new ones a breeze! Good luck whatever road you travel, Mike. ![]()
__________________
1968 Chevy 4x4 307 4 speed |
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Mar 2004
Location: Vale, NC
Posts: 283
|
This is not non-chevy, but we had a 396 out of a chevelle in a '69, de-badged with real quite mufflers. Used it for a sleeper.
![]()
__________________
1972 Custom 10 Deluxe- original paint, interior- 72k miles http://www.cardomain.com/ride/2466316 Cheap, Fast or Good. Pick any two. 1990 Eagle Talon AWD 1991.5 W250 CTD 1992 Cushman Truckster- Haulster |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Oct 2002
Location: West Des Moines, Ia
Posts: 3,233
|
as long as the motor is still a gm product i dont have a care in the world what you put in it, i want to someday put a buick 455 in a truck.
__________________
Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Jun 2004
Location: paris, texas
Posts: 235
|
a good buddy of mine put a 500 cad in his 70 chevy and it was awesome. burnouts from hell, would pull anything that would move.ran great stock, torque is king!
|
![]() |
![]() |
![]() |
#11 |
Vortec in the works
Join Date: Nov 2003
Location: Spring,Texas
Posts: 735
|
This is kinda off the wall but its funny what p.o will put in there trucks. 231 V-6
![]()
__________________
68? It's all figured out untill you get it apart. Is it Sunday yet??? 68 Project 68 SWB frame off/98 Vortec with stock FI/power everything. 95 ECLB 2500 with 346,000 on the clock(the original HD) 99 Lesabre-wifes ride 08 Crew Cab LTZ-All Mine 89 SWB 5/7 drop-Son's first ride. |
![]() |
![]() |
![]() |
#12 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,477
|
THERE IS A LOCAL GUY TIP TOEING AROUND PUTTIN A 4.3
![]() ![]()
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
![]() |
![]() |
![]() |
#13 |
Senior Member
![]() Join Date: Dec 2003
Location: Pampa, Texas
Posts: 1,554
|
maybe if it was a grand national turbo charged 231 v-6..........
__________________
https://www.ebay.com/itm/29620574751...mis&media=COPY |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Apr 2003
Location: Central PA....In the Berg of Nisbet
Posts: 790
|
I'd like to put a 12 Valve Cummins out of an old Dodge in one............Or a 4-53 Detroit
__________________
'72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!! |
![]() |
![]() |
![]() |
#15 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
I don't care if it is a ford engine...if a 427 SOHC fell out of the sky, it'd find a home in my SWB REAL quick.
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Aug 2004
Location: Cranston, RI
Posts: 162
|
Pontiac 400 swaps works well
I am currently putting a 1970 gto 400 into a 63 c10. It is not too bad a swap once you get the right mounts (for pontiacs it's not too bad). I spoke with a guy at the engine shop and one thing that's nice about torque motors is that you dont have to run them hard to do what you want to do (pulling or racing) they have a bottom end that gets you out fast if you can get it to stay on the road.
|
![]() |
![]() |
![]() |
#17 |
hmm...
Join Date: Jan 2004
Location: Culver, Indiana
Posts: 1,631
|
I know a guy on the oldsmobile boards that bought a set of custom-made Olds engine mounts to fit in a 67-72 chevy truck. It's going in his 71 LWB with a built 468. If you want me to ask about them, tell me. If you could stick an Olds 425 in there, that would be awesome. You know you drive an Oldsmobile when you have a 7 inch long rod.
![]()
__________________
1983 Oldsmobile Delta 88 1967 Chevy C-10 stripper www.fcrperformance.com - wanna go...faster? talk to FCR. |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Apr 2000
Location: Frisco, Tx, USA
Posts: 606
|
I've always felt the caddy engine belongs if anything other than Chevy. The old big block ones are high quality pieces than are more truck engines than the car engines that that pass for truck engines.
__________________
http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades. |
![]() |
![]() |
![]() |
#19 |
user # 2756
![]() Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
|
The guy I bought my 71 cab off of has a 427 in a 72 c-30 and a caddy motor in a 68 C-10.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm ![]() |
![]() |
![]() |
![]() |
#20 |
Coast 2 Coast in 61 mins.
Join Date: Jul 2004
Location: Canton, Illinois
Posts: 33
|
Gentlemen, I appreciate all the interest and response to my post, and as of yet no one has cast an evil spell my way.....I am leaning towards the caddy motor from what I have read about them, so that leaves me with a 40 over 454 with less than 5000 miles on it......what to do, what to do.
|
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Apr 2000
Location: Frisco, Tx, USA
Posts: 606
|
While it may never be as unique as a caddy, pontiac, or buick powered version, there is NEVER anything wrong with running what you've got. Especially, when it's a big block.
__________________
http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades. |
![]() |
![]() |
![]() |
#22 |
Cadillac power
Join Date: Oct 2002
Location: North Idaho
Posts: 296
|
I'm running a mildly built 500 Caddy. She's got more cam to her and I shift her out at 5600 rpm. With a TH400 and 4.11s I've managed to get down to 14.4 in the quarter-mile on street tires. That's with 320 pounds of concrete in the back to keep the wheels from going up in smoke off the line. I think I might hit 14 even with slicks and headers.
I've since taken that Predator off and installed a 900 Edelbrock, and installed a Jacobs electronic ignition setup. Hmmm. Must be time for new pictures.
__________________
Just for the record, if I'm down to my last potato, I'm not sharing it with a guy who wants to kill me so he can get a better supply of virgins in paradise. That lesson is a little thing I call Economics 101, infidel style. --Scott Adams author of Dilbert |
![]() |
![]() |
![]() |
#23 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Earl Junior... I'll bet that if you went to a 3.07 gear, you'd be quicker in the 1/4.
|
![]() |
![]() |
![]() |
#24 | |
Registered User
![]() Join Date: Apr 2004
Location: The Other Maine!
Posts: 2,236
|
![]() Quote:
__________________
1968 Chevy 4x4 307 4 speed |
|
![]() |
![]() |
![]() |
#25 |
graphic designer
Join Date: May 2004
Location: Spokane, Washington
Posts: 841
|
all these ideas sound great! i have looked at caddy motors at the local pull and save, not bad price wise, but then i have to deal with transmission/t-case issues!
![]() ![]() ![]() any takers? |
![]() |
![]() |
![]() |
Bookmarks |
|
|