F/S TH350/NP208 transfer case from 81 K5 together or seperate DFW, TX - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Staceydude · 09-13-2004, 02:45 PM

Hey All,

I wanted to list this for sale on the forum. I am swapping my K5 to 2X4 and have no need for these parts.

I have the Engine sold and the new owner is going to allow me to keep it in the truck for a short period of time in case anyone wishes to test out the components.

The tranny shifts flawlessly throughout all gears. It was rebuilt by the previous owner within the last year.

The Transfer case also shifts in and out of all gears flawlessly. It has also been rebuilt within the last year.

I am going to ask:

TH350 --- $200.00 OBO

NP208 --- $150.00 OBO

To save hassles I will sell the pair together for $300.00 if you help pull them

The prices of course are OBO.

If you are interested let me know asap so you can test drive the Blazer

so you know these are good quality working components... Not junkyard items.

If I did not want a 2X4 so bad I would not even consider selling them.

I may trade for the right items. I am looking for the following...

Aftermarket floor shifter for a TH400,

Big Block Chevy Intake,

Front end rebuild kit for 2WD Burb,

Possibly some drop spindles 2WD Burb,

Aftermarket Gauges to do a Gauge swap

Door panels and dash pad in excellent condition

Tools???? I would like to have a decent little mig welder (fluxcore type is fine)

I really need an engine stand or a cherry picker....

I need a very good quality torque wrench.

I will trade for Guns as well!!!

Or heck let me know what you have to trade.

My email is staceybeller@charter.net

Or please PM.

Thanks all

Stacey

Staceydude · 09-13-2004, 07:38 PM

Hey All,

I am going to go ahead and reduce the price of these already.

If they dont sell I will use them at a later date I suppose but If you need one of these items they are in excellent working order.

I am going to ask:

TH350 --- $200.00 OBO

NP208 --- $150.00 OBO

$300.00 for the pair.

Regards,

Stacey

Staceydude · 09-14-2004, 03:10 PM

Or whatever you may have for my build-up.

81-87 K5 parts etc

Regards,

Stacey

Jonboy · 09-16-2004, 11:05 PM

I drove this truck tonight, and the trans and transfer case both shift well and feel pretty good. The price is definitely right on this stuff, seems like it is cheap enough for you 4x4 boys to have as spares. Help a brother out so he can finish his project....

Staceydude · 09-17-2004, 09:30 AM

Hey John,

Thanks for the post.

I thought it was priced right as well.

I always hear from people needing a good transfer case or tranny. How many folks out there are running around with no front driveshaft haha. I know I have done it before.

Regards,

Stace

09-13-2004, 02:45 PM	#1
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	F/S TH350/NP208 transfer case from 81 K5 together or seperate DFW, TX Hey All, I wanted to list this for sale on the forum. I am swapping my K5 to 2X4 and have no need for these parts. I have the Engine sold and the new owner is going to allow me to keep it in the truck for a short period of time in case anyone wishes to test out the components. The tranny shifts flawlessly throughout all gears. It was rebuilt by the previous owner within the last year. The Transfer case also shifts in and out of all gears flawlessly. It has also been rebuilt within the last year. I am going to ask: TH350 --- $200.00 OBO NP208 --- $150.00 OBO To save hassles I will sell the pair together for $300.00 if you help pull them The prices of course are OBO. If you are interested let me know asap so you can test drive the Blazer so you know these are good quality working components... Not junkyard items. If I did not want a 2X4 so bad I would not even consider selling them. I may trade for the right items. I am looking for the following... Aftermarket floor shifter for a TH400, Big Block Chevy Intake, Front end rebuild kit for 2WD Burb, Possibly some drop spindles 2WD Burb, Aftermarket Gauges to do a Gauge swap Door panels and dash pad in excellent condition Tools???? I would like to have a decent little mig welder (fluxcore type is fine) I really need an engine stand or a cherry picker.... I need a very good quality torque wrench. I will trade for Guns as well!!! Or heck let me know what you have to trade. My email is staceybeller@charter.net Or please PM. Thanks all Stacey Last edited by Staceydude; 09-13-2004 at 07:36 PM.

09-14-2004, 03:10 PM	#3
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	Heck will even trade for an X-Box Or whatever you may have for my build-up. 81-87 K5 parts etc Regards, Stacey

09-16-2004, 11:05 PM	#4
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	I drove this truck tonight, and the trans and transfer case both shift well and feel pretty good. The price is definitely right on this stuff, seems like it is cheap enough for you 4x4 boys to have as spares. Help a brother out so he can finish his project.... __________________ 1974 Jimmy- 5.3/4L80e/NP241

09-13-2004, 07:38 PM	#2
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	Hey All, I am going to go ahead and reduce the price of these already. If they dont sell I will use them at a later date I suppose but If you need one of these items they are in excellent working order. I am going to ask: TH350 --- $200.00 OBO NP208 --- $150.00 OBO $300.00 for the pair. Regards, Stacey

09-17-2004, 09:30 AM	#5
Staceydude Registered User Join Date: Jun 2004 Location: DFW Area Texas Posts: 436	Hey John, Thanks for the post. I thought it was priced right as well. I always hear from people needing a good transfer case or tranny. How many folks out there are running around with no front driveshaft haha. I know I have done it before. Regards, Stace



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.