F/S - '72 Custom-10 Short-Wide - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Putter · 09-14-2004, 12:23 PM

I am gonna' try this again. I had this thing sold a few weeks ago to a board member. But, as things often do, a problem came up in his personal life and the deal seems to have been moved to the back burner. No harm no foul. Crap happens from time to time and I ain't gonna' cry about it. I'll just offer it to someone else. No hard feelings to my other buddy. Nice guy.

Anyway, I have a 1972 Custom-10 short bed fleet side truck for sale. Originally a V-8 truck with a column shift manual tranny. Both have been removed, but the rest is intact. Truck has 5-lug ralleys and disc brakes on the front. Previous owner installed airbags on the rear, but not the front. I do still have the coil springs that were removed if the buyer wants to go back to a stock setup. The front bumper and grill are bent. The only other part that is not is good shape is the bed floor. It has runsted out in several spots, but the sides are really good. I have a 250 inline 6-cylinder and a three speed saginaw that I will let go with it if you want it. I also have a replacement cross member, and the linkages for the shifter and clutch if you wanted to go back with a manual column shifted tranny.

If anyone is interested, I will let her go for $300. Or I would trade it for a small block of some sort.

Oh, in case you are wondering, I also have a good title that matches the door VIN plate.

If you have any questions or need to see specific areas, just let me know.

PUTTER

ringneck · 09-14-2004, 12:27 PM

Does she still run, or does it need to be hauled away?

john@thepier · 09-14-2004, 12:32 PM

when you say the bed is rusted out was it steel bed or wood ,can I see pics of bed please.

HuggerCST · 09-14-2004, 12:40 PM

Hey Putter, I'm interested, What shape is the cab in? And also the door bottoms? Not trying to jump in front of anybody, but if those are in decsent shape, and it's still for sale, I'll take it. I guess it's not an air cab? What kind of small block are you looking for? I have plenty of parts and complete stock engines, but nothing in running condition. I also have a 67-68 black bucket seat setup that I would trade.

Putter · 09-14-2004, 02:53 PM

RingNeck, the truck itself has no motor or tranny mounted in it. BUT, the motor that I listed above (the 250) does run (needs intake gasket). I pulled it out of my '69 about two months ago to install another 250 that was painted up nice. The 250 and tranny are still bolted together and were pulled as one unit with everything (alternator, water pump, starter, etc...) still mounted, running. The reason it needs an intake gasket is I pulled the intake to try and troubleshoot an issue with my new motor, thus messing up the intake gasket. I will post as many pics as I have so everyone can see.

John, it is a steel bed that has several rusted out spots (see new pics below)

Hugger, unfortunately it is not an A/C cab. It does have a tailgate.

Putter · 09-14-2004, 02:54 PM

A couple more...

HuggerCST · 09-14-2004, 03:11 PM

PM sent

biglou55 · 09-14-2004, 03:16 PM

if there was a way of getting it up here i would trade you a running 350 plus 4 speed i am pulling out of a 69 3/4 ton the #s say it is a 72-76

motor

Putter · 09-14-2004, 03:35 PM

Just my luck!?!?!

More Pictures below...

Putter · 09-14-2004, 03:37 PM

one more for now....

CHEVYE · 09-15-2004, 07:02 PM

do you have pics where the bed/tailgate meet? maybe some along the bottom inside of the bedsides too if possible, thanks.

67ChevyC10Stepside · 09-15-2004, 08:13 PM

i would love to have that but as usual am too far away

69 Short Fleet · 09-15-2004, 11:52 PM

Thats a dreamtruck just waiting to happen! Great deal, if I was closer it would be sold!!

Putter · 09-16-2004, 10:17 AM

Canada is not THAT far is it? Isn't Kelowna B.C. just north of Graceland (Memphis)? At one time, it was a sweet truck. I saw it before the P.O. pulled the engine and tranny to sell me the body. It would scoot and it was low! (Rear has bags)

meathead95 · 09-16-2004, 03:52 PM

pm me your # i have a buddy interested

dallas71 · 09-16-2004, 04:35 PM

are you selling the headliner trim???

highboy_04 · 09-16-2004, 07:42 PM

i've got a 427 thats rebuildable that i would trade you. pm me if you are interested. thanks, Steve

69 Short Fleet · 09-17-2004, 01:23 AM

Ya its pretty far, 1 - 2 hours north of Washington state border, depending on whos driving

Doug

Putter · 09-17-2004, 10:54 AM

Steve, as much fun as a BB sounds, I think that would be a bit much for for me. Sorry.
I have a pending deal with HuggerCST, but if something happens, I will let you all know. (I had a deal once before and it fell through!?!)

mcubedntx · 09-18-2004, 12:39 AM

I have an uncle that drives a transport for GM, I will check and see if he ever goes your way. If he does I have a 350 and a TH350 I will trade for it. If he is going your way I can send the engine. This may take some time. Let me know what ya think!

krue · 09-18-2004, 09:33 AM

Putter let me know if your deal with Hugger falls thru. Shipping would not be a problem. Pending approval of my boss of course!

Putter · 09-20-2004, 02:11 PM

I hear that. I'll let you know. Did you get any IVAN damage? What about Bill??.....never heard anything.

krue · 09-23-2004, 03:46 AM

Sorry I missed your reply. Naw, I don't think anyone had any damage to speak of.

09-14-2004, 12:23 PM	#1
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	F/S - '72 Custom-10 Short-Wide I am gonna' try this again. I had this thing sold a few weeks ago to a board member. But, as things often do, a problem came up in his personal life and the deal seems to have been moved to the back burner. No harm no foul. Crap happens from time to time and I ain't gonna' cry about it. I'll just offer it to someone else. No hard feelings to my other buddy. Nice guy. Anyway, I have a 1972 Custom-10 short bed fleet side truck for sale. Originally a V-8 truck with a column shift manual tranny. Both have been removed, but the rest is intact. Truck has 5-lug ralleys and disc brakes on the front. Previous owner installed airbags on the rear, but not the front. I do still have the coil springs that were removed if the buyer wants to go back to a stock setup. The front bumper and grill are bent. The only other part that is not is good shape is the bed floor. It has runsted out in several spots, but the sides are really good. I have a 250 inline 6-cylinder and a three speed saginaw that I will let go with it if you want it. I also have a replacement cross member, and the linkages for the shifter and clutch if you wanted to go back with a manual column shifted tranny. If anyone is interested, I will let her go for $300. Or I would trade it for a small block of some sort. Oh, in case you are wondering, I also have a good title that matches the door VIN plate. If you have any questions or need to see specific areas, just let me know. PUTTER Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 09-14-2004 at 03:00 PM.

09-14-2004, 12:40 PM	#4
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Hey Putter, I'm interested, What shape is the cab in? And also the door bottoms? Not trying to jump in front of anybody, but if those are in decsent shape, and it's still for sale, I'll take it. I guess it's not an air cab? What kind of small block are you looking for? I have plenty of parts and complete stock engines, but nothing in running condition. I also have a 67-68 black bucket seat setup that I would trade. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 09-14-2004 at 02:06 PM.

09-14-2004, 02:53 PM	#5
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	RingNeck, the truck itself has no motor or tranny mounted in it. BUT, the motor that I listed above (the 250) does run (needs intake gasket). I pulled it out of my '69 about two months ago to install another 250 that was painted up nice. The 250 and tranny are still bolted together and were pulled as one unit with everything (alternator, water pump, starter, etc...) still mounted, running. The reason it needs an intake gasket is I pulled the intake to try and troubleshoot an issue with my new motor, thus messing up the intake gasket. I will post as many pics as I have so everyone can see. John, it is a steel bed that has several rusted out spots (see new pics below) Hugger, unfortunately it is not an A/C cab. It does have a tailgate. Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

09-14-2004, 02:54 PM	#6
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	A couple more... Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

09-14-2004, 03:11 PM	#7
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	PM sent __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

09-14-2004, 12:27 PM	#2
ringneck Registered User Join Date: May 2003 Location: alaska Posts: 12	Does she still run, or does it need to be hauled away?

09-14-2004, 12:32 PM	#3
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	when you say the bed is rusted out was it steel bed or wood ,can I see pics of bed please.

09-14-2004, 03:16 PM	#8
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	if there was a way of getting it up here i would trade you a running 350 plus 4 speed i am pulling out of a 69 3/4 ton the #s say it is a 72-76 motor __________________ Certifiably crazy person

09-14-2004, 03:35 PM	#9
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Just my luck!?!?! More Pictures below... Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

09-14-2004, 03:37 PM	#10
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	one more for now.... Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

09-15-2004, 07:02 PM	#11
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	do you have pics where the bed/tailgate meet? maybe some along the bottom inside of the bedsides too if possible, thanks. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

09-15-2004, 08:13 PM	#12
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	i would love to have that but as usual am too far away __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

09-15-2004, 11:52 PM	#13
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	Thats a dreamtruck just waiting to happen! Great deal, if I was closer it would be sold!!

09-16-2004, 10:17 AM	#14
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Canada is not THAT far is it? Isn't Kelowna B.C. just north of Graceland (Memphis)? At one time, it was a sweet truck. I saw it before the P.O. pulled the engine and tranny to sell me the body. It would scoot and it was low! (Rear has bags) __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

09-16-2004, 03:52 PM	#15
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	pm me your # i have a buddy interested __________________ 72 2wd blazer 72 swb 4x4



Register or Log In To remove these advertisements.

09-16-2004, 04:35 PM	#16
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	are you selling the headliner trim??? __________________ My 1966 LWB Truck My 1966 SWB Truck

09-16-2004, 07:42 PM	#17
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	i've got a 427 thats rebuildable that i would trade you. pm me if you are interested. thanks, Steve __________________ '67 c10 350/th350

09-17-2004, 01:23 AM	#18
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	Ya its pretty far, 1 - 2 hours north of Washington state border, depending on whos driving Doug

09-17-2004, 10:54 AM	#19
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Steve, as much fun as a BB sounds, I think that would be a bit much for for me. Sorry. I have a pending deal with HuggerCST, but if something happens, I will let you all know. (I had a deal once before and it fell through!?!) __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

09-18-2004, 12:39 AM	#20
mcubedntx Registered User Join Date: Sep 2002 Location: West Texas Posts: 54	I have an uncle that drives a transport for GM, I will check and see if he ever goes your way. If he does I have a 350 and a TH350 I will trade for it. If he is going your way I can send the engine. This may take some time. Let me know what ya think! __________________ Just a NOVICE who thinks this is the BEST board on the WEB!!

09-18-2004, 09:33 AM	#21
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Putter let me know if your deal with Hugger falls thru. Shipping would not be a problem. Pending approval of my boss of course! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

09-20-2004, 02:11 PM	#22
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	I hear that. I'll let you know. Did you get any IVAN damage? What about Bill??.....never heard anything. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

09-23-2004, 03:46 AM	#23
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Sorry I missed your reply. Naw, I don't think anyone had any damage to speak of. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

Register or Log In To remove these advertisements.