FS-72 Cheyenne-Parts or Project-DFW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fatfords · 09-16-2004, 02:17 PM

Is anyone interested in the “crunched parts chaser” as a complete project or parts truck?

Here are the particulars:
72 Chevy Cheyenne, C10, LWB, 350/700R4, AC, 91K miles
Lots of good parts or a good starting point for your next project.
$650

I can PM or e-mail you more details and pics if you are interested. Here's a few for a general idea of condition. AND..."It was running when I crashed it!"

Chris H · 09-16-2004, 02:34 PM

PM sent, I sense a road trip in my future!

Burnsman · 09-16-2004, 02:34 PM

I need a driver side longbed upper bed molding. Wanna sell? Let me know thanks. It's a shame. That's a nice truck!

Chevy Muscle · 09-16-2004, 02:37 PM

Where in DFW are ya?

fatfords · 09-16-2004, 02:44 PM

I'm going to try to sell the whole truck together, otherwise, I will pull the motor and tranny and make a trailer out of the back.

The only parts that have been taken from the truck is the HEI cap/coil/wires for another project. The dizzy itself is still there.

I'm in Aledo, on the west side of Fort worth, just a few miles from the west end of I-30.

flip66 · 09-16-2004, 03:13 PM

did you sell this yet

fatfords · 09-16-2004, 03:34 PM

I still have it. Chris H has "right of first refusal" and is checking on shipping arrangements to Minnesota! He said he would let me know tomorrow (friday). I will continue to answer questions as best I can.

flip66 · 09-16-2004, 03:41 PM

put me next in line

TEXAS 68 · 09-16-2004, 03:52 PM

Can you e-mail me some more pics www.redss68@hotmail.com and put me next in line

fatfords · 09-16-2004, 03:55 PM

OK, so I don't get confused and ya'll know where you stand

1. flip66
2. 69ChevySWB
3. Texas 68
4. 6camaro9
5. SCOTI
6. SMONTY
7. justascratch
Thanks for all the interest and PM's. I will continue to answer questions and add/subtract from this list.

TEXAS 68 · 09-16-2004, 04:14 PM

Thanks for the pics, does it have a posi rear? I'll ask about some other things if it gets down to me. Thanks Scott

fatfords · 09-16-2004, 04:28 PM

Scott,
I believe it is the original rear end, and posi is not listed on the option sheet, so I don't think it is. New shoes, seals and gear lube were the next things on the list. Never got there.

6camaro9 · 09-16-2004, 04:41 PM

add me to the list.

thanks,
thomas...

7gmc2 · 09-16-2004, 06:17 PM

fat fords i had been wondering what had happened to you with this truck. i remember seeing the post when you first wrecked it and feeling so bad for you

. i was hopeing you were going to fix it back up. i guess now you have other plans......

i hope your other project is a good one like this truck. good luck!

SCOTI · 09-16-2004, 06:34 PM

Well.... the list is long but put me on it anyway.
Thanks.... Scot.

fatfords · 09-16-2004, 10:07 PM

6camaro9 and SCOTI have been added to the list.
7GMC2, The truck was exactly what I wanted-a dependable truck to haul stuff that also was cool to drive. It wasn't perfect, but that was the beauty of it. I didn't have to worry about scratching the bed hauling stuff around. Everything worked, it was fun to drive and only required some routine maintenance. After the crash, it took so long to settle the insurance claims (I thought they were going to total it, which would give me a "salvage title") that I had missed a couple of opportunities to buy really nice front clips from local guys (SMONTY for one).
I still have my 56 F-100 that I need to finish. It's got a Camaro clip, the 350/350 combo, radiator, rear end and wiring harness, all from the Camaro. I also have an unexpected tractor project that I have to get underway.
I need to downsize, and this is the logical project. I continue to watch for one in similar condition to mine, but so far, nothing has caught my eye.

Chris H · 09-17-2004, 10:51 AM

It is with great sadness and mixed feelings that I hereby remove myself from the list.

This is going to make someone a great project, and I suspect flip66 will have himself a new truck by the end of the weekend.

Fatfords has been an absolute pleasure to talk with on the phone, and I appreciate the time he afforded me to get the info I needed to make my decision. I think anyone will be very pleased in dealing with him!

Thanks all,
Chris

fatfords · 09-17-2004, 11:00 AM

Chris,
It was pleasure talking to you and I appreciate your consideration, timely responses and kind words. I hope you find a good cab a little closer to home.

flip66, You've got mail!

mhicks · 09-17-2004, 01:10 PM

Want to sell the motor?

justascatch · 09-17-2004, 08:46 PM

Cash waiting, if the list gets to me. Will pick up within 48 hours of you saying yes.

fatfords · 09-17-2004, 10:24 PM

mhicks-still trying to sell it all together
SMONTY-got your PM and added you to the list
justascratch -added you to the list
Thanks for the replies. As of today, flip66 (Phil) says he wants it and will try to pick it up this Sunday, if he can get a trailer.

deadof_knight · 09-18-2004, 08:29 PM

Hey I got a question what size an brand are your gauges you put in I like the way they turned out ....please let me know puten mine toghter from a booboo kinda like your but front end only damage.....

fatfords · 09-20-2004, 02:28 PM

--SOLD--Thanks, flip66

deadof knight-gauges are 2 1/16 Autometers, installed from the front. The PO did it, so not sure of all the details but the stock cluster lense was definately cut off to allow the gauges to pass thru.

Good Luck!

TEXAS 68 · 09-20-2004, 06:06 PM

Oh Well

flip66 · 09-20-2004, 10:57 PM

FatFords was very easy to deal with and up front the truck was what he said and more. Thanks.

09-16-2004, 02:17 PM	#1
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	FS-72 Cheyenne-Parts or Project-DFW Is anyone interested in the “crunched parts chaser” as a complete project or parts truck? Here are the particulars: 72 Chevy Cheyenne, C10, LWB, 350/700R4, AC, 91K miles Lots of good parts or a good starting point for your next project. $650 I can PM or e-mail you more details and pics if you are interested. Here's a few for a general idea of condition. AND..."It was running when I crashed it!" Attached Images __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab

09-16-2004, 02:34 PM	#2
Chris H 72 C30 Trailer Queen Join Date: Dec 1999 Location: SE MN, USA Posts: 794	PM sent, I sense a road trip in my future! __________________ Chris H 72 C30 133" 72 C30 157" flat-dump 69 C10 short fleet 71 ElCamino 2000 K2500 crewcab shortbed (sold, sorry old friend) 2005 GMC 2500HD shortcrew Duramax 2006 K1500 RCSB and a couple other projects/parts

09-16-2004, 02:34 PM	#3
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	parts I need a driver side longbed upper bed molding. Wanna sell? Let me know thanks. It's a shame. That's a nice truck! __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

09-16-2004, 02:44 PM	#5
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	I'm going to try to sell the whole truck together, otherwise, I will pull the motor and tranny and make a trailer out of the back. The only parts that have been taken from the truck is the HEI cap/coil/wires for another project. The dizzy itself is still there. I'm in Aledo, on the west side of Fort worth, just a few miles from the west end of I-30. __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab

09-16-2004, 03:34 PM	#7
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	I still have it. Chris H has "right of first refusal" and is checking on shipping arrangements to Minnesota! He said he would let me know tomorrow (friday). I will continue to answer questions as best I can. __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab

09-16-2004, 02:37 PM	#4
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 292	Where in DFW are ya?

09-16-2004, 03:13 PM	#6
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	did you sell this yet

09-16-2004, 03:41 PM	#8
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	put me next in line

09-16-2004, 03:52 PM	#9
TEXAS 68 Vortec in the works Join Date: Nov 2003 Location: Spring,Texas Posts: 735	Can you e-mail me some more pics www.redss68@hotmail.com and put me next in line __________________ 68? It's all figured out untill you get it apart. Is it Sunday yet??? 68 Project 68 SWB frame off/98 Vortec with stock FI/power everything. 95 ECLB 2500 with 346,000 on the clock(the original HD) 99 Lesabre-wifes ride 08 Crew Cab LTZ-All Mine 89 SWB 5/7 drop-Son's first ride.

09-16-2004, 03:55 PM	#10
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	OK, so I don't get confused and ya'll know where you stand 1. flip66 2. 69ChevySWB 3. Texas 68 4. 6camaro9 5. SCOTI 6. SMONTY 7. justascratch Thanks for all the interest and PM's. I will continue to answer questions and add/subtract from this list. __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab Last edited by fatfords; 09-17-2004 at 10:27 PM. Reason: add Texas 68, add 6camaro9, add SCOTI, shuffle, add justascratch

09-16-2004, 04:14 PM	#11
TEXAS 68 Vortec in the works Join Date: Nov 2003 Location: Spring,Texas Posts: 735	Thanks for the pics, does it have a posi rear? I'll ask about some other things if it gets down to me. Thanks Scott __________________ 68? It's all figured out untill you get it apart. Is it Sunday yet??? 68 Project 68 SWB frame off/98 Vortec with stock FI/power everything. 95 ECLB 2500 with 346,000 on the clock(the original HD) 99 Lesabre-wifes ride 08 Crew Cab LTZ-All Mine 89 SWB 5/7 drop-Son's first ride.

09-16-2004, 04:28 PM	#12
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	Scott, I believe it is the original rear end, and posi is not listed on the option sheet, so I don't think it is. New shoes, seals and gear lube were the next things on the list. Never got there. __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab

09-16-2004, 04:41 PM	#13
6camaro9 Registered User Join Date: Jun 2004 Location: Moving, TX Posts: 35	add me to the list. thanks, thomas...

09-16-2004, 06:17 PM	#14
7gmc2 Registered User Join Date: Jun 2004 Location: Rockville Va. Posts: 260	fat fords i had been wondering what had happened to you with this truck. i remember seeing the post when you first wrecked it and feeling so bad for you . i was hopeing you were going to fix it back up. i guess now you have other plans...... i hope your other project is a good one like this truck. good luck! __________________ 1972 GMC Sierra Grande

09-16-2004, 06:34 PM	#15
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Well.... the list is long but put me on it anyway. Thanks.... Scot. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

09-16-2004, 10:07 PM	#16
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	6camaro9 and SCOTI have been added to the list. 7GMC2, The truck was exactly what I wanted-a dependable truck to haul stuff that also was cool to drive. It wasn't perfect, but that was the beauty of it. I didn't have to worry about scratching the bed hauling stuff around. Everything worked, it was fun to drive and only required some routine maintenance. After the crash, it took so long to settle the insurance claims (I thought they were going to total it, which would give me a "salvage title") that I had missed a couple of opportunities to buy really nice front clips from local guys (SMONTY for one). I still have my 56 F-100 that I need to finish. It's got a Camaro clip, the 350/350 combo, radiator, rear end and wiring harness, all from the Camaro. I also have an unexpected tractor project that I have to get underway. I need to downsize, and this is the logical project. I continue to watch for one in similar condition to mine, but so far, nothing has caught my eye. __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab

09-17-2004, 10:51 AM	#17
Chris H 72 C30 Trailer Queen Join Date: Dec 1999 Location: SE MN, USA Posts: 794	It is with great sadness and mixed feelings that I hereby remove myself from the list. This is going to make someone a great project, and I suspect flip66 will have himself a new truck by the end of the weekend. Fatfords has been an absolute pleasure to talk with on the phone, and I appreciate the time he afforded me to get the info I needed to make my decision. I think anyone will be very pleased in dealing with him! Thanks all, Chris

09-17-2004, 11:00 AM	#18
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	Chris, It was pleasure talking to you and I appreciate your consideration, timely responses and kind words. I hope you find a good cab a little closer to home. flip66, You've got mail! __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab

09-17-2004, 01:10 PM	#19
mhicks Registered User Join Date: Jan 2004 Location: Weatherford,Tx Posts: 747	Want to sell the motor?

09-17-2004, 08:46 PM	#20
justascatch Justascratch Join Date: Jun 2004 Location: OKC, OK Posts: 160	Cash waiting, if the list gets to me. Will pick up within 48 hours of you saying yes. __________________ justascratch-OKC,OK

09-17-2004, 10:24 PM	#21
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	mhicks-still trying to sell it all together SMONTY-got your PM and added you to the list justascratch -added you to the list Thanks for the replies. As of today, flip66 (Phil) says he wants it and will try to pick it up this Sunday, if he can get a trailer. __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab Last edited by fatfords; 09-17-2004 at 10:28 PM.

09-18-2004, 08:29 PM	#22
deadof_knight FixerUpper Join Date: Dec 2000 Location: Lawton ,Oklahoma Posts: 102	Hey I got a question what size an brand are your gauges you put in I like the way they turned out ....please let me know puten mine toghter from a booboo kinda like your but front end only damage..... __________________ 1-Cheyenne 72 700R4,camper special all original when i got it then i improved it a little Blue and White 3.73,4 core rad, 700r4,MSD hei ,turbo muffs dual exhaust only had 50 k on it when i bought original mile sweet old ladies truck turned into a stump puller No. 2 C-10 72 w/air and Tilt and power and the cheyenne trim package shtbd is dropped 2-3w/factory tilt has torq thrust 2 rims 2003 dodge neon steel blue color

09-20-2004, 02:28 PM	#23
fatfords Registered User Join Date: Sep 2002 Location: DFW, TX Posts: 350	--SOLD--Thanks, flip66 deadof knight-gauges are 2 1/16 Autometers, installed from the front. The PO did it, so not sure of all the details but the stock cluster lense was definately cut off to allow the gauges to pass thru. Good Luck! __________________ '56 F-100 (w/all GM stuff) Lookin' for another parts chaser! '05 GMC crew cab

09-20-2004, 06:06 PM	#24
TEXAS 68 Vortec in the works Join Date: Nov 2003 Location: Spring,Texas Posts: 735	Oh Well __________________ 68? It's all figured out untill you get it apart. Is it Sunday yet??? 68 Project 68 SWB frame off/98 Vortec with stock FI/power everything. 95 ECLB 2500 with 346,000 on the clock(the original HD) 99 Lesabre-wifes ride 08 Crew Cab LTZ-All Mine 89 SWB 5/7 drop-Son's first ride.

09-20-2004, 10:57 PM	#25
flip66 Registered User Join Date: Jan 2004 Location: Garland TX Dallas area Posts: 658	FatFords was very easy to deal with and up front the truck was what he said and more. Thanks.

Register or Log In To remove these advertisements.