Still parting out 67 C30 dually & 72 C10!

[botboy]

Still parting both these trucks, have a friend taking parts off and shipping them for me in MN now. I am also parting out my '83 K5, thread here for those interested in some parts:
http://207.44.196.117/vboard/showthread.php3?t=120587

Dibsed parts:
3.07 rear end open coil spring - swanny
New pair of rear coil springs $105 shipped (130 new) still have paint on them - swanny
'72 front clip w/disk brakes, good pads & brake MC and vacuum booster - Guff
1 clutch/flywheel/pressure plate assy's $30 + SH ea - 1969 4x4

Without further ado:

DRIVETRAIN
SM420 2WD $105 (shifts good, complete incl tranny, top, yoke, shifter, knob, bellhousing, driveshaft if you want it) pick it up
3 Bellhousings $25 ea + SH
1 clutch/flywheel/pressure plate assy's $30 + SH ea
1 manual clutch/brake pedal assys $55 shipped ea
5.14 eaton rear open leaf spring $65 pick it up (will throw in springs, frame section, driveshaft if you want and help load)
'67 SM420 driveshaft/yoke $30 pick it up
T221 T-case (empty) $10 + SH or pick up
T221 T-case access cover $10 shipped (blasted and primed)
2 throttle pedal Assy's 1 cable $30 Shipped 1 rod $25 shipped
PS setup from '72 $110 Shipped (new hose, good hose, box, pump, pulley, bracket)

ENGINE BAY
67-72 Window wash reservoir $15 shipped w/cap
3 67-72 window wash reservoir bracket $6 shipped ea
2 Windshield wiper motor 67-72 $25 shipped both work great
'72 heater core and surrounding plastic and fan $60 Shipped

FRAME/XMEMBER/MOUNTS
shock plates for rear coils $25 shipped pr
2 good rear trailing arms $35 ea pick it up or can ship
V8 auto xmember $40 + SH
I6 Manual xmember $40 + SH (claimed already)
V8 2WD engine mounts $25 + SH
I6 250 2WD engine mounts $25 + SH
'72C10 Frame (bare) $1 you pick up
'67C30 Dually Frame (bare) $1 you pick up
'72 Rad support nice shape $55 pick it up
Battery tray - some rust not rotted out $35 shipped
Battery tray - some rot $15 shipped (good sides - good for repair)

SHEETMETAL
'72 driver condition pr of doors (DS has speaker hole cut) black outside need paint, good glass and regulators (non-power) $75/pr pick up
Metal 67-70 door panels no armrest style $45 shipped pr
3 67-72 cowl panels $10 apeice + SH
'69-72 hood with fiberglass cobra style scoop (needs paint) $45 pick it up
'72 driver condition grille assy (headlight doors, inner and outer - inner has cracks but everything still there, outer has a couple small dents, doors good) $85 shipped
'67 front sheet metal (front grille, inners, headlight doors, support in pretty good shape couple small easily fixable dents no thru rust) $90 + SH
Smoothed non-AC 67-72 dash no gauges (radio indent shaved out) orange needs paint over smoothed areas incl glovebox $80 pick it up
Uncut '67 dash $45 pick it up non-AC
LWB Front panel, needs a couple bolt holes repaired no rot $25 + SH

CLIMATE CONTROL
'67 heater box non-ac $50 shipped
'72 heater box non-ac $50 shipped
'71 climate controls good knobs and levers $35 shipped
'67 climate controls good knobs and levers dirty $25 shipped

ELECTRICAL
Non-tach '72 dash w/sunpro shift light tach installed (low profile version) $80 shipped
'67 non-tach dash $30 shipped
Fiberglass "tune trapper" stealth tuned am/fm antennae $35 shipped (new never installed - fiberglass coat won't rust, good for boats or rods)
'72 front lighting harness $15 shipped
'67 front lighting harness $15 shipped
'67 engine harness (I6) $12 shipped
'72 engine harness V8 (a little hacked up) $8 shipped
'72 horn $12 shipped
'67 horn $12 shipped
'83 horns $18 shipped

WHEELS
4 centerline style rims in pretty good shape, nice tires, 5 lug, 15" $175 pick set up I'll throw in a 5 lug ralley with a good matching spare

INTERIOR
Pr buick seats in '72, one rip on PS shoulder (would be easy to stitch, on flat spot by shoulder, accidentally whacked with knife), no belts, red, nice and cushy $50/pr pick up

EMBLEMS
'83 chevy blazer emblems (K5, silverado) from fenders and back quarters $30 shipped set nice shape



I'm currently in ames IA away from home in delano so I can bring stuff down and meet you here on/near campus if you like, or I can meet you to get stuff when I'm in minnesota. Or depending on size I can have a friend in minnesota pull and ship parts.

[JDL]

can you send a pic of the C30 frame

[Inspector722]

Interested in the 67 front sheet metal parts, I6 the wiring harness, 67 horn. Can you send pics?

[botboy]

Originally Posted by JDL

can you send a pic of the C30 frame

Okay body isn't off of this one yet, here's the only picture I have (in this pic its the truck on the LH side)

http://www.usfamily.net/web/botboy60/67C30/2trucks.jpg

The truck at one point was a ?boom truck? or something because it has some serious heavy duty overload springs and a frame reinforcement. Whats there would be removeable with a torch or plasma cutter pretty easily. No structural rust from what I can see.

Inspector722, I looked for the picture I thought I had of the front of the 67 and can't find anything. I'll get my dad or sister to take a picture of it with our digicam and send it to you asap.