** 72 parts truck 4 sale a/c, ps,pb ** - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JQ-72** · 09-22-2004, 02:27 AM

I bought this truck to part out, but seeing if anyone is interested in it like it is. It is a 72 GMC Sierra Grande 20 Custom Camper with no motor/trans. The truck came from up north so the body is trash! It was a 350/350 truck. It has power steering pump, brackets, hoses, power brakes, all A/C stuff except compressor and brackets, dana 60 (single 4.10), front stabilizer, auto column with linkage and crossmember, tinted glass, both alternator brackets. Also has the hard to find 16" rims. Again, there is no good sheet metal (maybe hood) and the air cab has rust in rockers and corners but is repairable. Top side of cab is real nice - uncut dash, visor area rust free, firewall gutter area also good. I figured over $700 worth of parts if sold seperately. Will sell whole truck for $450. I will get pictures when server is back up.

Joshua

**JQ-72** · 09-28-2004, 09:31 PM

seeing if attachments are working

**JQ-72** · 09-28-2004, 09:37 PM

OK, here's the rest of the pictures. One more offer at $450. If no interest, I will start parting it out.

Joshua

A few 72's · 10-01-2004, 08:30 AM

bump

Tynee · 10-01-2004, 11:14 AM

If you part how much for the A/C controls to 40505? Only interested in levers have never been repaired. Also interested in under dash duct work. Let me know.

1971c10 · 10-02-2004, 11:26 AM

Ttt

nitor · 10-03-2004, 11:23 PM

JQ, I'm needing a tailgate.

Trifelynn · 10-03-2004, 11:54 PM

How much for the power steering assembly?
Does it still have the gearbox?
if so, the complete PS package

Blue Beard · 10-04-2004, 07:53 AM

Haven't seen too many of the GMC's with the A/C units out here...

**guyryan100** · 10-04-2004, 09:35 AM

how much for auto shift linkage to 30041?

71-longbed · 10-04-2004, 09:40 AM

im interested in the brake and parking brake pads and chrome trim .... possible the the upper and lower alternator brackets if you could get a another shot of both .. pm me with the details ... peace

**JQ-72** · 10-05-2004, 12:14 AM

OK, going to part the GMC out. Here goes:

Tynee: a/c controller (not broken) w/cables $40 shipped
nitor : no good tailgate, good luck!!
Trifelynn : p.s. is complete with pump, brackets, hoses, and gearbox. $150. Give me your zip for accurate shipping cost - it's heavy.
guyryan100 : $35 shipped for linkage. missing piece on trans.
71 lb : pedal pads $20 shipped. Alt. brackets (not broken) $35 shipped. Will combine shipping if you want both.

Joshua

Longhorn Man · 10-05-2004, 05:49 AM

I may be interested in all the upper and lowe mouldings, can I see a pic of the drivers side of the truck, and a price for it all?

Longhorn Man · 10-05-2004, 05:49 AM

And is there anything you may be looking for that can be used as trading material?

A few 72's · 10-05-2004, 08:26 AM

JQ
We made it back with the Burb glass and T-dash. When we moved the glass over to the long horn I ended up with 5 pieces of door glass. With it dark I did not check, but I think we loaded one piece of the truck door glass. PM me a price or a date of when you need it back.
Shan...

jw445ozzy · 10-05-2004, 11:53 AM

How much you want for the cab? and what kind of shape is the inside in?

fast71 · 10-05-2004, 12:47 PM

How much for the vent windows? shipped to 30755

**JQ-72** · 10-05-2004, 06:23 PM

Cab (bare) $75. Uncut dash and good top. lower half bad. Needs rockers, corners, supports, floor.

Vent windows $45 shipped.

Joshua

67chev · 10-05-2004, 06:29 PM

Can you put me in line behind fast71 for the vent windows? What shape are they in?? Thanks!

fast71 · 10-05-2004, 06:32 PM

go ahead and let 67 chev have them . I might have some locally spotted.

**JQ-72** · 10-05-2004, 06:38 PM

vent windows : pivot posts not broken, rubber has usual deterioration, chrome is faded a little, good soft-ray tinted glass. Good driver condition.

Joshua

67chev · 10-05-2004, 06:49 PM

do you do paypal...or m/o?? Let me know either your email addy for Paypal, or address for snail mail. Thanks!

67chev · 10-05-2004, 06:50 PM

ohhhh...forgot to say thanks to fast71.

09-22-2004, 02:27 AM	#1
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,572	72 parts truck 4 sale a/c, ps,pb I bought this truck to part out, but seeing if anyone is interested in it like it is. It is a 72 GMC Sierra Grande 20 Custom Camper with no motor/trans. The truck came from up north so the body is trash! It was a 350/350 truck. It has power steering pump, brackets, hoses, power brakes, all A/C stuff except compressor and brackets, dana 60 (single 4.10), front stabilizer, auto column with linkage and crossmember, tinted glass, both alternator brackets. Also has the hard to find 16" rims. Again, there is no good sheet metal (maybe hood) and the air cab has rust in rockers and corners but is repairable. Top side of cab is real nice - uncut dash, visor area rust free, firewall gutter area also good. I figured over $700 worth of parts if sold seperately. Will sell whole truck for $450. I will get pictures when server is back up. Joshua

09-28-2004, 09:31 PM	#2
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,572	seeing if attachments are working Attached Images

09-28-2004, 09:37 PM	#3
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,572	OK, here's the rest of the pictures. One more offer at $450. If no interest, I will start parting it out. Joshua Attached Images

10-01-2004, 08:30 AM	#4
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	bump __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

10-01-2004, 11:14 AM	#5
Tynee I miss this truck. Join Date: Dec 2001 Location: Lexington, KY U.S.A. Posts: 2,863	If you part how much for the A/C controls to 40505? Only interested in levers have never been repaired. Also interested in under dash duct work. Let me know. __________________ '07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT.

10-02-2004, 11:26 AM	#6
1971c10 You talkin to ME! Join Date: May 2004 Location: Skyline, Alabama Posts: 177	Ttt __________________ Is this yours? PM If it is. 1998 Dodge Dakota Sport-Sold 1971 C10 Auto/307-Sold 1966 Mustang-sold 1976 GMC Short bed 1999 Ford Mustang 2002 Dodge Neon

10-03-2004, 11:23 PM	#7
nitor Too many projects Join Date: Aug 2002 Location: Morrow, OH Posts: 344	JQ, I'm needing a tailgate. __________________ Jim '55 Chevrolet Pickup '56 Chevrolet Belair '04 Chevrolet Astro '95 Chevrolet Blazer

10-03-2004, 11:54 PM	#8
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	How much for the power steering assembly? Does it still have the gearbox? if so, the complete PS package __________________ Always looking for a 2wd blazer

10-04-2004, 07:53 AM	#9
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Haven't seen too many of the GMC's with the A/C units out here... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

10-04-2004, 09:35 AM	#10
guyryan100 Registered User Join Date: Sep 2001 Location: Cumming, GA Posts: 470	how much for auto shift linkage to 30041?

10-04-2004, 09:40 AM	#11
71-longbed Its Magically Delicious Join Date: Jan 2003 Location: oregon Posts: 2,398	im interested in the brake and parking brake pads and chrome trim .... possible the the upper and lower alternator brackets if you could get a another shot of both .. pm me with the details ... peace __________________ 71 C10 LWB 350sbc -TH350 12 bolt 3.42 Posi Of all my favorite things to do, The utmost is to have a brew. My love grows for my foamy friend, with each thirst-quenching elbow bend. Beer so frosty, smooth, and cold it's paradise pure liquid gold. Yes beer means many things to me that's all for now cus I gotta pee.

10-05-2004, 12:14 AM	#12
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,572	OK, going to part the GMC out. Here goes: Tynee: a/c controller (not broken) w/cables $40 shipped nitor : no good tailgate, good luck!! Trifelynn : p.s. is complete with pump, brackets, hoses, and gearbox. $150. Give me your zip for accurate shipping cost - it's heavy. guyryan100 : $35 shipped for linkage. missing piece on trans. 71 lb : pedal pads $20 shipped. Alt. brackets (not broken) $35 shipped. Will combine shipping if you want both. Joshua

10-05-2004, 05:49 AM	#13
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I may be interested in all the upper and lowe mouldings, can I see a pic of the drivers side of the truck, and a price for it all?

10-05-2004, 08:26 AM	#15
A few 72's Registered User Join Date: Mar 2004 Location: Alabama Posts: 705	JQ We made it back with the Burb glass and T-dash. When we moved the glass over to the long horn I ended up with 5 pieces of door glass. With it dark I did not check, but I think we loaded one piece of the truck door glass. PM me a price or a date of when you need it back. Shan... __________________ 1972 C10 SWB 350 / T400 1972 SWB GMC 350/T350 1972 Cheyenne 20 super "long horn". 402BB / T400 1972 Suburban C10 Deluxe 350 / T350 and a few more.. http://www.myspace.com/afew72s

10-05-2004, 11:53 AM	#16
jw445ozzy Registered User Join Date: Oct 2004 Posts: 2	How much you want for the cab? and what kind of shape is the inside in?



Register or Log In To remove these advertisements.

10-05-2004, 12:47 PM	#17
fast71 Drive it like U stole it Join Date: Mar 2000 Location: tunnel hill ,GA /Chatt,TN Posts: 956	How much for the vent windows? shipped to 30755 __________________ 71 custom 10 swb 72 nova ss 72 nova custom 87 s10 96 burb 94 camry 53 5 window 3100

10-05-2004, 06:23 PM	#18
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,572	Cab (bare) $75. Uncut dash and good top. lower half bad. Needs rockers, corners, supports, floor. Vent windows $45 shipped. Joshua

10-05-2004, 06:29 PM	#19
67chev Registered User Join Date: Apr 2004 Location: Spokane, WA Posts: 458	Can you put me in line behind fast71 for the vent windows? What shape are they in?? Thanks! __________________ "SicStee8" Chevy SWB Fleetside, in progress...500 HP 383 w/TriPower, 700r4, 3.73's, Lowered, Shaved Driprail/sidemarkers/handles/ant, Gonna rock!! '96 Chevy Tahoe 4X4 '84 Chevy C/K10 4X4 (FOR SALE)

10-05-2004, 06:32 PM	#20
fast71 Drive it like U stole it Join Date: Mar 2000 Location: tunnel hill ,GA /Chatt,TN Posts: 956	go ahead and let 67 chev have them . I might have some locally spotted. __________________ 71 custom 10 swb 72 nova ss 72 nova custom 87 s10 96 burb 94 camry 53 5 window 3100

10-05-2004, 06:38 PM	#21
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,572	vent windows : pivot posts not broken, rubber has usual deterioration, chrome is faded a little, good soft-ray tinted glass. Good driver condition. Joshua

10-05-2004, 06:49 PM	#22
67chev Registered User Join Date: Apr 2004 Location: Spokane, WA Posts: 458	do you do paypal...or m/o?? Let me know either your email addy for Paypal, or address for snail mail. Thanks! __________________ "SicStee8" Chevy SWB Fleetside, in progress...500 HP 383 w/TriPower, 700r4, 3.73's, Lowered, Shaved Driprail/sidemarkers/handles/ant, Gonna rock!! '96 Chevy Tahoe 4X4 '84 Chevy C/K10 4X4 (FOR SALE)

10-05-2004, 06:50 PM	#23
67chev Registered User Join Date: Apr 2004 Location: Spokane, WA Posts: 458	ohhhh...forgot to say thanks to fast71. __________________ "SicStee8" Chevy SWB Fleetside, in progress...500 HP 383 w/TriPower, 700r4, 3.73's, Lowered, Shaved Driprail/sidemarkers/handles/ant, Gonna rock!! '96 Chevy Tahoe 4X4 '84 Chevy C/K10 4X4 (FOR SALE)

Register or Log In To remove these advertisements.