Got her naked today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nu2-72 · 09-27-2004, 09:57 PM

Wife and I took the cab off this morning. Mounted some tires on the old wheels and now she is ready to have the drivetrain pulled.

BLAZERMAN · 09-28-2004, 12:13 AM

You guys are making pretty good progress.

It looks like the leaves are really changing colors up your way.

**Canadian694x4** · 09-28-2004, 12:21 AM

Great Work...Keep Up The Progress!

Brainchild · 09-28-2004, 12:53 AM

I wish I had time to mine like that,but it looks like that's a few years awya yet

Looking good so far

Where is Amazonia??

Rusty Rider · 09-28-2004, 01:04 AM

Wish I had the room to do a compleat tear down. Seams like the only way to get exacly the truck you want and you two are chuging right along. Way to go NU2.

nu2-72 · 09-28-2004, 06:46 AM

Thanks guys. The wife is a real trooper on this stuff. Going to get it on the trailer and to the car wash next.

The leaves are gone from the walnut trees. Really changing fast. Beans will start coming out this week. Real early for them.

Amazonia is in the Northwest part of the state. Along the Missouri River, next to Kansas just short of Iowa and Nebraska by 90 miles, North of KC by 65 miles

68C15 · 09-28-2004, 07:27 AM

your making me jealous. I wish I had a place to do a tear down. oh well, soon enough. BTW, I like your "cab dolly" <hehe>

Joe67 · 09-28-2004, 07:35 AM

Funny seeing the cab in the bed like that

Brainchild · 09-28-2004, 09:42 AM

I have to finish a couple of projects,and buy something to drive,then I can break it down like that.

65 miles north of KC,that is all the way across the state from me,I'm 50 miles soutwest of Springfield.

Edmond · 09-28-2004, 02:12 PM

Hey Kevin that looks good man!
Again I must say I wish I had a space like that to work in.

How long will this project take? Maybe I'll see a finished truck in august 2005...

Cya,
Edmond

*rage'nrat638* · 09-28-2004, 02:16 PM

mounted.....
mounted......your making me blush....

LOOKS GREAT MAN.....

nu2-72 · 09-28-2004, 09:14 PM

Edmond. I hope it is that quick but I doubt it. Got the drivetrain pulled today. Ready to roll the frame out and hit the car wash.

gregsplace · 09-28-2004, 10:35 PM

ahhh...I remember the ole car wash days!! I bet the car wash owner STILL remembers me, lol. Finally convinced the wife that all them quarters could be going to my own power washer, of course I told her I needed it to powerwash the old paint off the house so that made it a done deal for me!
makin good progress on the truck too, Kevin.

Blue Beard · 09-28-2004, 10:55 PM

Title of thread guaranteed to make you look....

Looks like alot of work for a short time. Keep us posted on updates.

nu2-72 · 09-29-2004, 08:17 PM

Pulled the drivetrain last night and loaded on the trailer today. Heading to the carwash aftr work tomorrow. Then it is home to the grinder. Have some welding to do, some cutting to do and then finish the strip job. Take to the sandblasters next.
Here's a thought. I have a friend that just rebuilt his Jeep from the ground up. His frame was junk so he bought an aftermarket galvanized frame. Looks really nice.
My company sends stuff to the galvanizer all the time. Hot dip. What would you all think of a galvanized frame? I would have to have all my modifications done. Only want to dip once you know. Speak up.

gmc67swb · 09-30-2004, 12:39 AM

Quote:

Originally Posted by 67c10step

Funny seeing the cab in the bed like that

I'm willing to bet that when that truck rolled off the assembly line, the workers at the plant would never have imagined the cab of the truck would one day be sitting in the bed.

**StingRay** · 09-30-2004, 10:20 AM

I will add a bit of weight. Any threaded holes have to be protected or chased later. No bolts may be left on or they will get soldered in. The acid dipping prior to galvanizing is capable of causing hydrogen embrittlement if extensive pickling is required. Personally I think it's a great idea as long as you don't mind another 40 or 50 lbs of weight.

teeitup · 09-30-2004, 12:52 PM

Looking good Kevin, keep her busy working on it!!!!!

09-27-2004, 09:57 PM	#1
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Got her naked today Wife and I took the cab off this morning. Mounted some tires on the old wheels and now she is ready to have the drivetrain pulled. Attached Images __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

09-28-2004, 12:21 AM	#3
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Great Work...Keep Up The Progress! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

09-28-2004, 12:53 AM	#4
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	I wish I had time to mine like that,but it looks like that's a few years awya yet Looking good so far Where is Amazonia?? __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

09-28-2004, 01:04 AM	#5
Rusty Rider Registered User Join Date: Aug 2004 Location: Martinsburg, W.V. Posts: 85	Wish I had the room to do a compleat tear down. Seams like the only way to get exacly the truck you want and you two are chuging right along. Way to go NU2. __________________ 72 long fleet (WIP) 00 Astro every day

09-28-2004, 06:46 AM	#6
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Thanks guys. The wife is a real trooper on this stuff. Going to get it on the trailer and to the car wash next. The leaves are gone from the walnut trees. Really changing fast. Beans will start coming out this week. Real early for them. Amazonia is in the Northwest part of the state. Along the Missouri River, next to Kansas just short of Iowa and Nebraska by 90 miles, North of KC by 65 miles __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

09-28-2004, 12:13 AM	#2
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	You guys are making pretty good progress. It looks like the leaves are really changing colors up your way.

09-28-2004, 07:27 AM	#7
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	your making me jealous. I wish I had a place to do a tear down. oh well, soon enough. BTW, I like your "cab dolly" <hehe> __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card

09-28-2004, 07:35 AM	#8
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Funny seeing the cab in the bed like that __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

09-28-2004, 09:42 AM	#9
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	I have to finish a couple of projects,and buy something to drive,then I can break it down like that. 65 miles north of KC,that is all the way across the state from me,I'm 50 miles soutwest of Springfield. __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

09-28-2004, 02:12 PM	#10
Edmond Registered User Join Date: Jan 2000 Location: The Netherlands Posts: 1,063	Hey Kevin that looks good man! Again I must say I wish I had a space like that to work in. How long will this project take? Maybe I'll see a finished truck in august 2005... Cya, Edmond __________________ 1971 Chevy C/20 Longhorn, 350/TH400, Edelbrock Performer, IMPCO 425 LPG Carb 1974 Chevy Camaro Z28 (Original) ------------------------- The Netherlands

09-28-2004, 02:16 PM	#11
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	mounted..... mounted......your making me blush.... LOOKS GREAT MAN.....

09-28-2004, 09:14 PM	#12
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Edmond. I hope it is that quick but I doubt it. Got the drivetrain pulled today. Ready to roll the frame out and hit the car wash. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

09-28-2004, 10:35 PM	#13
gregsplace Senior Member Join Date: Dec 2000 Location: Colwich,Kansas Posts: 713	ahhh...I remember the ole car wash days!! I bet the car wash owner STILL remembers me, lol. Finally convinced the wife that all them quarters could be going to my own power washer, of course I told her I needed it to powerwash the old paint off the house so that made it a done deal for me! makin good progress on the truck too, Kevin. __________________ 67 3/4 4x4 402,a/t,flat bed 98 GMC Sierra swb daily driver 87 burb parting out. 68 1/2 chevy, 350/350, 71 gmc frame, kid's beater 69 1ton 396-4sp, dump 69 swb stepside 396/400th current frameup 67 swb 454/400th rebuilding now, oldest boy just rolled it 99,HD, Road King Classic Colwich Ks

09-28-2004, 10:55 PM	#14
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Title of thread guaranteed to make you look.... Looks like alot of work for a short time. Keep us posted on updates. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

09-29-2004, 08:17 PM	#15
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Still on the diet Pulled the drivetrain last night and loaded on the trailer today. Heading to the carwash aftr work tomorrow. Then it is home to the grinder. Have some welding to do, some cutting to do and then finish the strip job. Take to the sandblasters next. Here's a thought. I have a friend that just rebuilt his Jeep from the ground up. His frame was junk so he bought an aftermarket galvanized frame. Looks really nice. My company sends stuff to the galvanizer all the time. Hot dip. What would you all think of a galvanized frame? I would have to have all my modifications done. Only want to dip once you know. Speak up. Attached Images __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide



Register or Log In To remove these advertisements.

09-30-2004, 10:20 AM	#17
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	I will add a bit of weight. Any threaded holes have to be protected or chased later. No bolts may be left on or they will get soldered in. The acid dipping prior to galvanizing is capable of causing hydrogen embrittlement if extensive pickling is required. Personally I think it's a great idea as long as you don't mind another 40 or 50 lbs of weight. __________________ Saskatoon, Saskatchewan Canada

09-30-2004, 12:52 PM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Looking good Kevin, keep her busy working on it!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.