WTB radiator support - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Richard Dobson · 10-05-2004, 12:57 PM

Does anyone have a orginal 67-68 radiator support in good condition that they would be willing to sell? The after market one I bought won't work.

Joe67 · 10-05-2004, 01:12 PM

I'm planning to run an aftermarket rad/core support on my '67. What about yours didnt' work?

Here is one from a 68 on ebay right now.

Richard Dobson · 10-06-2004, 05:12 PM

I have a lot of difficulty getting fender, hood, grill to align properly. Mine is a
Tri Plus. I had a Goodmark 67-68 cowl hood I wanted to use but with the alignment problems I returned it. I am putting 68 fenders hood etc on a 71 chevy fleetside.

Richard Dobson · 10-06-2004, 05:25 PM

I have been told to use 67-68 radiator support bushings, and I have been told by other members that they used the 69-72 bushing with no problems. I would hate to have to buy both to try. I have installed my original 71 radiator support back on my truck and installed the 68 fenders, hood, grill etc with the best results as far as alignment goes yet, but I know that I cannot use this 71 orginal rad support, however does this tell me that a org 67-68 one will solve my problem? The 67-68 tri-plus rad support that I have don't give me the alignment success I am having with the last method I stated. I am open to any further advice from anyone having done a 67-68 front clip transplant to a 71 Chevy. Thanks for all the input I have gotten so far, I will weed it out, I know everyone is giving helpful advice and I thank you for it.

**Gary 70 Jimmy** · 10-06-2004, 08:44 PM

I have a real nice one for 125.00+shipping can take pics if you want

Richard Dobson · 10-07-2004, 08:58 AM

Yes send Pics, I want it if it is a nice piece. Let me know how to proceed with payment if it is indeed nice.

**Gary 70 Jimmy** · 10-08-2004, 08:44 AM

I will have to dig it out and take pics over the weak end

10-05-2004, 12:57 PM	#1
Richard Dobson Registered User Join Date: Apr 2003 Location: Easley, South Carolina Posts: 491	WTB radiator support Does anyone have a orginal 67-68 radiator support in good condition that they would be willing to sell? The after market one I bought won't work. __________________ Richard Dobson

10-05-2004, 01:12 PM	#2
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	I'm planning to run an aftermarket rad/core support on my '67. What about yours didnt' work? Here is one from a 68 on ebay right now. __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

10-06-2004, 05:12 PM	#3
Richard Dobson Registered User Join Date: Apr 2003 Location: Easley, South Carolina Posts: 491	67c10step I have a lot of difficulty getting fender, hood, grill to align properly. Mine is a Tri Plus. I had a Goodmark 67-68 cowl hood I wanted to use but with the alignment problems I returned it. I am putting 68 fenders hood etc on a 71 chevy fleetside. __________________ Richard Dobson

10-06-2004, 05:25 PM	#4
Richard Dobson Registered User Join Date: Apr 2003 Location: Easley, South Carolina Posts: 491	Problems-Answers??? I have been told to use 67-68 radiator support bushings, and I have been told by other members that they used the 69-72 bushing with no problems. I would hate to have to buy both to try. I have installed my original 71 radiator support back on my truck and installed the 68 fenders, hood, grill etc with the best results as far as alignment goes yet, but I know that I cannot use this 71 orginal rad support, however does this tell me that a org 67-68 one will solve my problem? The 67-68 tri-plus rad support that I have don't give me the alignment success I am having with the last method I stated. I am open to any further advice from anyone having done a 67-68 front clip transplant to a 71 Chevy. Thanks for all the input I have gotten so far, I will weed it out, I know everyone is giving helpful advice and I thank you for it. __________________ Richard Dobson

10-07-2004, 08:58 AM	#6
Richard Dobson Registered User Join Date: Apr 2003 Location: Easley, South Carolina Posts: 491	Gary 70 Jimmy Yes send Pics, I want it if it is a nice piece. Let me know how to proceed with payment if it is indeed nice. __________________ Richard Dobson

10-06-2004, 08:44 PM	#5
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	I have a real nice one for 125.00+shipping can take pics if you want

10-08-2004, 08:44 AM	#7
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	I will have to dig it out and take pics over the weak end



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.