|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-07-2004, 02:07 PM
|
#1 |
|
Registered User
Join Date: Oct 2004
Posts: 5
|
wtb: front spindles and caliper mount from '73-'74 Blazer
I 'm looking for the front spindles and the backing plate/ caliper mount for a 73-74 blazer. If you have any e-mail me at stevenmc@cox.net
thanks Steve |
|
|
|
10-07-2004, 05:03 PM
|
#2 |
|
Registered User
Join Date: Jun 2003
Location: spokane wa
Posts: 2,189
|
Are you still 1/2 ton??
either way I have the 1/2 ton stuff for you. I'll figure out a price tonight.. Or i have these for 40.00 plus S&H these are 3/4 ton spindles. I actually got these from a 1/2 ton big bearing hub D44..
__________________
Support The Board |
|
|
|
|
10-10-2004, 11:23 PM
|
#3 |
|
Registered User
Join Date: Oct 2004
Posts: 5
|
I need the 1/2 ton stuff if you have it.
Thanks |
|
|
|
|
10-28-2004, 10:20 PM
|
#4 |
|
Senior Member
 Join Date: Mar 2003
Location: Colfax-California
Posts: 8,650
|
I have a bunch of caliper supports, do you need the solid steel ones or the half ones with the lower tin? Where are you located?
Last edited by kwmech; 10-28-2004 at 10:23 PM. |
|
|
|
|
10-29-2004, 10:11 AM
|
#5 |
|
Registered User
Join Date: Oct 2004
Posts: 5
|
I would rather the solid steel ones. I need the ones that when measured from the edge of where the spindle is mounted to the bolt hole for the caliper bolt it is a little less than 5". I'm located in New Orleans
Thanks Steve |
|
|
|
|
10-29-2004, 10:30 PM
|
#6 |
|
Senior Member
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,650
|
I have them 70.00 plus the ride in the brown truck
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
