Edelbrock Headers - PRICE DROPPED - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PHOENIX · 10-07-2004, 02:09 PM

Edelbrock TES Headers w/ Y-Pipe and Extras
Edelbrock Part Number: 6827
Asking $280.00
Buyer pays shipping (For USA should not exceed $20.00).
Send PM or email for shipping quote (provide zip code, city, state and specify if residential or commercial).
Will ship from Peoria, Arizona.
Prefer to ship UPS Ground and I have a UPS Daily pick-up account so shipping will be fair, insured and with tracking number.

These headers have never been run. I purchased them for my 1983 C-10 but they will not fit manual transmission trucks. They will fit trucks (79-87 5.0L & 5.7L) and suburbans (81-87 5.0L & 5.7L) with automatic transmissions. These are nice headers with thick flanges and good welds, these are quality headers that sell for $380.00 from Jegs and Summit Racing.

Application Chart (Edelbrock's website):
http://www.edelbrock.com/automotive...tml#chevytrucks

More information on these headers at Edelbrock's website:
http://www.edelbrock.com/automotive/tes.html

These headers on SummitRacing.com:
http://store.summitracing.com/defau...l-6827&x=12&y=7

These headers on Jegs.com:
http://www.jegs.com/cgi-bin/ncommer...977&prmenbr=361

I have bought and sold with members on this board before and have not had any problems.
Can provide some references if you would like.
Attached image is an actual picture of what you will receive.
Send PM or email with any questions or concerns.

twxsby · 10-11-2004, 11:03 PM

Would you check that Edelbrock part # again. Edelbrock.com and Summit Racing.com refer to Part #6527 for my 84 K-20.
Thanks

PHOENIX · 10-11-2004, 11:45 PM

Part Number is correct:
http://www.edelbrock.com/automotive/tes_chart.html

The 6527's are like stock manifolds, but they are headers.
I ended up getting the 6527's because they will clear the clutch linkage.
These 6827 headers will only work on automatics.
These 6827 may or may not fit your truck.
Your truck shows that you need 6828 or 6527.
Let me know if you want to try them anyways.
Shipping to you would be around $18.00

twxsby · 10-12-2004, 05:26 PM

After being on hold for 20 min+, Edelbrock recommends the 6527. I have no Cats, the 6827 is designed to bolt up just in front of the cats.
Thanks anyway
Good Luck

10-07-2004, 02:09 PM	#1
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Edelbrock Headers - PRICE DROPPED Edelbrock TES Headers w/ Y-Pipe and Extras Edelbrock Part Number: 6827 Asking $280.00 Buyer pays shipping (For USA should not exceed $20.00). Send PM or email for shipping quote (provide zip code, city, state and specify if residential or commercial). Will ship from Peoria, Arizona. Prefer to ship UPS Ground and I have a UPS Daily pick-up account so shipping will be fair, insured and with tracking number. These headers have never been run. I purchased them for my 1983 C-10 but they will not fit manual transmission trucks. They will fit trucks (79-87 5.0L & 5.7L) and suburbans (81-87 5.0L & 5.7L) with automatic transmissions. These are nice headers with thick flanges and good welds, these are quality headers that sell for $380.00 from Jegs and Summit Racing. Application Chart (Edelbrock's website): http://www.edelbrock.com/automotive...tml#chevytrucks More information on these headers at Edelbrock's website: http://www.edelbrock.com/automotive/tes.html These headers on SummitRacing.com: http://store.summitracing.com/defau...l-6827&x=12&y=7 These headers on Jegs.com: http://www.jegs.com/cgi-bin/ncommer...977&prmenbr=361 I have bought and sold with members on this board before and have not had any problems. Can provide some references if you would like. Attached image is an actual picture of what you will receive. Send PM or email with any questions or concerns. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION * Last edited by PHOENIX; 04-12-2013 at 12:28 PM.

10-11-2004, 11:03 PM	#2
twxsby Registered User Join Date: Apr 2003 Location: Cypress, TX Posts: 81	Would you check that Edelbrock part # again. Edelbrock.com and Summit Racing.com refer to Part #6527 for my 84 K-20. Thanks __________________ 84 K-20 Burb 94 Ranger 4X4

10-11-2004, 11:45 PM	#3
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Part Number is correct: http://www.edelbrock.com/automotive/tes_chart.html The 6527's are like stock manifolds, but they are headers. I ended up getting the 6527's because they will clear the clutch linkage. These 6827 headers will only work on automatics. These 6827 may or may not fit your truck. Your truck shows that you need 6828 or 6527. Let me know if you want to try them anyways. Shipping to you would be around $18.00 __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

10-12-2004, 05:26 PM	#4
twxsby Registered User Join Date: Apr 2003 Location: Cypress, TX Posts: 81	After being on hold for 20 min+, Edelbrock recommends the 6527. I have no Cats, the 6827 is designed to bolt up just in front of the cats. Thanks anyway Good Luck __________________ 84 K-20 Burb 94 Ranger 4X4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.