What's Planned for the weekend? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**lock** · 10-08-2004, 09:37 PM

4 day weekend for me. Hope to get most of my cab repairs done!

Wootdog · 10-09-2004, 07:05 AM

Install the visors, headliner, carpet, and bolt in the new Bonneville bucket seats. And maybe replace the stereo in the other truck. Kerry

TugOwar · 10-09-2004, 10:18 AM

Yardwork planned for today (saturday), I have a tendency to let the grass go too long sometimes in favor of more fun jobs.

Later this afternoon probably more sanding and body work on my 68, thats one of those fun jobs! hehe

**BIG ORANGE** · 10-09-2004, 10:24 AM

I'm running a BIG Super Stock race tonight and thats the last race. After that I can finish the Harley truck and get it ready to cruise around in!

FRENCHBLUE72 · 10-09-2004, 11:30 AM

Gonna try and get the 69 all together (electrical suck's) and spend sunday on my 72 hopefully.....

FRENCHBLUE72 · 10-09-2004, 11:31 AM

Are all the thread's actin up?????

Nima · 10-09-2004, 12:35 PM

I plan to change the intake, carburator and valve covers. It's a big job for me considering that I have to do all other things around the house too.

ronh72c10 · 10-09-2004, 02:30 PM

Started my thanksgiving long weekend early and dropped the engine and tranny in the burb this morning. Got four more days and hope to have it running by tuesday.

What's everybody else planning?

Ron

Putter · 10-09-2004, 02:32 PM

Thanksgiving??? Wow, that is a looooonnngggg weekend. I haven't gotten through the Columbus Day weekend yet. I like those blue covers.

ronh72c10 · 10-09-2004, 02:41 PM

Perhaps I should have said it's the Canadian Thanksgiving long weekend.

Ron

crawdad · 10-09-2004, 02:44 PM

Oh my! That engine be looking good!

**COBALT** · 10-09-2004, 02:52 PM

Cool engine.

I have to set all of my floor tile in my bathroom I spent all week cutting. It's all laid out dry right now. Gotta number the pieces and put them in bags tonight. Tomorrow I break out the thinset...

Alexis · 10-09-2004, 03:00 PM

WoohOooo 3 day weekend for me!!!!kinda. This was a good week for me on the R & D side. I get to work on the ol' girl today some though, saturday and sunday put in a full 8 hours+ each day. But I got to leave monday open for my studys

On britney I should have the front side of the windshield finished by saturday midday and maybe finish the back side. Then sunday I can start cutting in the floors and go to town on that SOB.

later, lunch is early today

edit:

couple more

Been listening to metallica all day today.

shuttermutt · 10-09-2004, 03:00 PM

I'd like to:

Get a console from da-burb and install it
Get some other miscellaneous parts from da-burb and install them, too
Fix ALL of my instrument lighting
Fix the damn cigarette lighter (again)
Set the choke
Finish the fab work on my air cleaner adapter
Clean out the bed (winter's on its way)
Clean the wheels
Replace my under-dash duct work
See about getting my TH400 kickdown working

Mostly piddle and play stuff, but I'm sure to break something bigger along the way.

kxmotox247 · 10-09-2004, 03:20 PM

Covered Bridge Festival in Parke County, Indiana

My girlfriend and I go over there every year. The leaves are turning now and the hills are beautiful. I think there are 20+ bridges to go and see not to mention all of the crafts and goodies at the different stops.
It from 10/8 to 10/17.

TugOwar · 10-09-2004, 03:23 PM

Quote:

Originally Posted by kxmotox247

Covered Bridge Festival in Parke County, Indiana

My girlfriend and I go over there every year. The leaves are turning now and the hills are beautiful. I think there are 20+ bridges to go and see not to mention all of the crafts and goodies at the different stops.
It from 10/8 to 10/17.

That sounds like fun, a bunch of classics crusin the country side on a crisp fall day. Cool stuff

kxmotox247 · 10-09-2004, 04:17 PM

GMC Paul's Shop is right there too! I may have to trick my girlfriend into stopping there. Ha!
We're not going to be able to take any of the truck since we're also going with another couple.

Brainchild · 10-09-2004, 04:24 PM

Quote:

Originally Posted by ronh72c10

Perhaps I should have said it's the Canadian Thanksgiving long weekend.

Ron

Whew! I thought I was missing a few days there:p

I plan on making use of this time to play some music,The guitars are getting jealous,and I have to get the amps in the truck,and retain my sanity all the while.

Did I mention I have 5 teenagers at home

It ain't no easy task,believe me!

Alvin · 10-09-2004, 04:29 PM

Today I took my cab back off the frame, and set it on a nifty cart I yanked out of a dumpster at work. Just had to cut some 2x4 to hold the cab up, and it works great.

And here's a short video showing how easy it rolls around:

Clicky

I think that's good for one day :p

cdowns · 10-09-2004, 05:47 PM

i've got a guy coming to pick up a cab sat morning then the rest of the day i'll be working on listing a bunch of parts that didn't sell on the parts board onto ebay and sunday i'll be cuttin up some nice rustfree fenders doors and a hood to take to the scrapmetal place on monday

LUV2XCLR8 · 10-09-2004, 06:34 PM

CELEBRATING 15 YEARS AT OUR FACILITY, VERY LARGE COMPANY PICNIC
CATERED W/ DOOR PRIZES, GIFTS, SPEECHES, ETC...., ETC....., ETC.....

THEN OFF TO THE WIFE'S COMPANY PICNIC.

SAME DAMN DAY

PRETTY MUCH WILL KILL MOST OF MY WEEKEND, NO "GQ" TIME

**Canadian694x4** · 10-09-2004, 07:00 PM

Ron Lookin' good man! I hope to give my truck a bath at least this weekend in between the many dinner's I have to eat.

Keep up the great progress and hope to hear that you get it running. Have a Happy Thanksgiving Ron!

crazy longhorn · 10-09-2004, 07:41 PM

Moroso covers? Blue looks good! I have the Red ones on my old truck

Dont have too much planned for the weekend.....if the shop is "hoppin", I may have to work. Otherwise, I smell rubber smoke from me old longhorn

Have fun, crazyL

*rage'nrat638* · 10-09-2004, 08:00 PM

bryon dragstrip.....this week end the wheelie contest....
sweet car's hitting the pavement hard......some flip over.....some just get trashed....some do kick butt...wheelie's....
can't wait........

ronh72c10 · 10-09-2004, 09:30 PM

Did alot of powdercoating today(Saturday). Decided to put the core support in, and once I saw that decided to make the truck look like something and put the fenders on. I probably not use the fenders that came with the truck, they're pretty rough. I think I'll use the new set I bought for my wife's truck, don't tell her though.

Ron

10-08-2004, 09:37 PM	#1
lock Insert funny comment. Join Date: Dec 1999 Location: Concord NC Posts: 621	4 day weekend for me. Hope to get most of my cab repairs done! __________________ ------------ - Mark -My Build Thread... -68 C10, LT1 - Undergoing Frame off resto -86 IROC-Z T72 turbo 355, M6 -70 Camaro http://www.iroc-ss.com

10-09-2004, 07:05 AM	#2
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,683	Work on the interior Install the visors, headliner, carpet, and bolt in the new Bonneville bucket seats. And maybe replace the stereo in the other truck. Kerry __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

10-09-2004, 10:24 AM	#4
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	I'm running a BIG Super Stock race tonight and thats the last race. After that I can finish the Harley truck and get it ready to cruise around in! __________________ Things happen for a reason!

10-09-2004, 11:30 AM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Gonna try and get the 69 all together (electrical suck's) and spend sunday on my 72 hopefully..... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-09-2004, 11:31 AM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Are all the thread's actin up????? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-09-2004, 10:18 AM	#3
TugOwar Registered User Join Date: Sep 2004 Location: Pleasanton, TX Posts: 1,723	Yardwork planned for today (saturday), I have a tendency to let the grass go too long sometimes in favor of more fun jobs. Later this afternoon probably more sanding and body work on my 68, thats one of those fun jobs! hehe

10-09-2004, 12:35 PM	#7
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,179	I plan to change the intake, carburator and valve covers. It's a big job for me considering that I have to do all other things around the house too.

10-09-2004, 02:30 PM	#8
ronh72c10 Senior Member Join Date: Jul 2003 Location: Mount Forest, Ontario, Canada Posts: 978	What's Planned for the weekend? Started my thanksgiving long weekend early and dropped the engine and tranny in the burb this morning. Got four more days and hope to have it running by tuesday. What's everybody else planning? Ron Attached Images __________________ 72 Chevy C10 (rust repaired, starting body work) 72 GMC 3/4ton 4x4 72 Chevy C20 Suburban 38 Ford Tudor Humpback Sedan (from the darkside) 67 Pontiac Parisienne 55 Studebaker Commander 2dr Hardtop (Starliner) My Youtube channel with Video Updates!

10-09-2004, 02:32 PM	#9
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Thanksgiving??? Wow, that is a looooonnngggg weekend. I haven't gotten through the Columbus Day weekend yet. I like those blue covers. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

10-09-2004, 02:41 PM	#10
ronh72c10 Senior Member Join Date: Jul 2003 Location: Mount Forest, Ontario, Canada Posts: 978	Perhaps I should have said it's the Canadian Thanksgiving long weekend. Ron __________________ 72 Chevy C10 (rust repaired, starting body work) 72 GMC 3/4ton 4x4 72 Chevy C20 Suburban 38 Ford Tudor Humpback Sedan (from the darkside) 67 Pontiac Parisienne 55 Studebaker Commander 2dr Hardtop (Starliner) My Youtube channel with Video Updates!

10-09-2004, 02:44 PM	#11
crawdad Senior Member Join Date: Sep 2004 Location: Georgia Posts: 614	Oh my! That engine be looking good! __________________ 2012 Silverado LT 1500, 5.3, 6 speed auto '86 SWB C-10 Silverado

10-09-2004, 02:52 PM	#12
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Cool engine. I have to set all of my floor tile in my bathroom I spent all week cutting. It's all laid out dry right now. Gotta number the pieces and put them in bags tonight. Tomorrow I break out the thinset... Attached Images __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

10-09-2004, 03:00 PM	#13
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	WoohOooo 3 day weekend for me!!!!kinda. This was a good week for me on the R & D side. I get to work on the ol' girl today some though, saturday and sunday put in a full 8 hours+ each day. But I got to leave monday open for my studys On britney I should have the front side of the windshield finished by saturday midday and maybe finish the back side. Then sunday I can start cutting in the floors and go to town on that SOB. later, lunch is early today edit: couple more Been listening to metallica all day today. Last edited by Alexis; 10-09-2004 at 03:02 PM.

10-09-2004, 03:00 PM	#14
shuttermutt Don't say "Oops!", Doctor Join Date: Nov 2003 Location: Houston, TX Posts: 677	I'd like to: Get a console from da-burb and install it Get some other miscellaneous parts from da-burb and install them, too Fix ALL of my instrument lighting Fix the damn cigarette lighter (again) Set the choke Finish the fab work on my air cleaner adapter Clean out the bed (winter's on its way) Clean the wheels Replace my under-dash duct work See about getting my TH400 kickdown working Mostly piddle and play stuff, but I'm sure to break something bigger along the way. __________________ 'Mutt 1968 CST LWB: R.I.P. 1967 Chevelle: TPI 454 beast 1967 C10 SWB: Claimed when Bumpster didn't put it on his list

10-09-2004, 03:20 PM	#15
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,397	Covered Bridge Festival in Parke County, Indiana My girlfriend and I go over there every year. The leaves are turning now and the hills are beautiful. I think there are 20+ bridges to go and see not to mention all of the crafts and goodies at the different stops. It from 10/8 to 10/17. __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com



Register or Log In To remove these advertisements.

10-09-2004, 04:17 PM	#17
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,397	GMC Paul's Shop is right there too! I may have to trick my girlfriend into stopping there. Ha! We're not going to be able to take any of the truck since we're also going with another couple. __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com

10-09-2004, 04:29 PM	#19
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Today I took my cab back off the frame, and set it on a nifty cart I yanked out of a dumpster at work. Just had to cut some 2x4 to hold the cab up, and it works great. And here's a short video showing how easy it rolls around: Clicky I think that's good for one day :p __________________ Ethel - The Legend Continues... Ethel has been sold.

10-09-2004, 05:47 PM	#20
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	i've got a guy coming to pick up a cab sat morning then the rest of the day i'll be working on listing a bunch of parts that didn't sell on the parts board onto ebay and sunday i'll be cuttin up some nice rustfree fenders doors and a hood to take to the scrapmetal place on monday __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-09-2004, 06:34 PM	#21
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	CELEBRATING 15 YEARS AT OUR FACILITY, VERY LARGE COMPANY PICNIC CATERED W/ DOOR PRIZES, GIFTS, SPEECHES, ETC...., ETC....., ETC..... THEN OFF TO THE WIFE'S COMPANY PICNIC. SAME DAMN DAY PRETTY MUCH WILL KILL MOST OF MY WEEKEND, NO "GQ" TIME __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-09-2004, 07:00 PM	#22
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Ron Lookin' good man! I hope to give my truck a bath at least this weekend in between the many dinner's I have to eat. Keep up the great progress and hope to hear that you get it running. Have a Happy Thanksgiving Ron! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

10-09-2004, 07:41 PM	#23
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Moroso covers? Blue looks good! I have the Red ones on my old truck Dont have too much planned for the weekend.....if the shop is "hoppin", I may have to work. Otherwise, I smell rubber smoke from me old longhorn Have fun, crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

10-09-2004, 08:00 PM	#24
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	bryon dragstrip.....this week end the wheelie contest.... sweet car's hitting the pavement hard......some flip over.....some just get trashed....some do kick butt...wheelie's.... can't wait........

10-09-2004, 09:30 PM	#25
ronh72c10 Senior Member Join Date: Jul 2003 Location: Mount Forest, Ontario, Canada Posts: 978	Did alot of powdercoating today(Saturday). Decided to put the core support in, and once I saw that decided to make the truck look like something and put the fenders on. I probably not use the fenders that came with the truck, they're pretty rough. I think I'll use the new set I bought for my wife's truck, don't tell her though. Ron Attached Images __________________ 72 Chevy C10 (rust repaired, starting body work) 72 GMC 3/4ton 4x4 72 Chevy C20 Suburban 38 Ford Tudor Humpback Sedan (from the darkside) 67 Pontiac Parisienne 55 Studebaker Commander 2dr Hardtop (Starliner) My Youtube channel with Video Updates!

Register or Log In To remove these advertisements.