WTB - Bed/Box, Tailgate, LH Door, other parts, etc. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DTerry · 10-14-2004, 10:07 AM

Great site folks!

We (I'm DTerry's dad) are looking for a bunch of parts to restore his 70 GMC LWB Fleetside. He's on a low budget - so aftermarket parts are looking too expensive. Parts must be within 4 hours (mapquest time) of ZIP code 13748 OR capable of shipping to this zip. Parts must be in good restorable condition (no holes - no bondo - some surface rust OK).

Here's the list of what we're currently looking for.
1. Complete LWB FS box
2. Tailgate **
3. Drivers side door
4. Rear roll pan
5. Parts needed to convert '70 GMC to '70 Chevy grill.

** We are actually thinking of removing all badges off this GMC 3/4 ton and making a lowered chevy 1/2 clone. The suspension is phase II of this project and will be looking to spend what we have left on that after the body is complete. If anyone has info on the tailgate covers and handle relocation thing, I'd be interested in hearing thoughts.

71HUGGER396 · 10-14-2004, 11:13 AM

I have a 69 gmc that I'm parting out. It's from AZ, It's rust free. The frame is really clean and it's a 1/2 ton. Using this frame would alot easy then converting from 3/4to 1/2. The bed is rust free , the header panel is straight. I'm 5 1/2 hours from you, my zip is 16055. I know that it's over 4 hours, but I'm just throwing out to you. My cell # is 724-309-8991. I work different shifts, so if you leave a message, I will return you call.

Burnsman · 10-14-2004, 11:21 AM

I used to own the truck Hugger has. It is a very nice rust-free piece. I wish I could have kept it. I have to agree with him. It may be cheaper to swap everything over. Just a thought.

Hotrodhenryj · 10-14-2004, 01:43 PM

Those Arizona trucks sure get around LOL

Burnsman · 10-14-2004, 01:45 PM

Chuck, you big truck whore...................

vtblazer · 10-15-2004, 09:07 PM

How far are you from VT? More than 4hrs, I'd bet.

I have some front end sheet metal here if your interested. Radiator supports also.
Nothing for a long fleet though.

LILREDGMC · 10-16-2004, 10:28 AM

Two Colorado beds in Pittsburgh. One with twin tanks one stock. Sides are excellent, front panel same, floor has square rust above rear support on floor, about 2" x 2", two places. Not beat up but definately user friendly.

$400 for twin tank $475 for stock, 1 has gate, but it is only fair, has some rust though.

Email for pics.

Dave Reed · 10-17-2004, 12:17 AM

I am less than 4 hours from you in CT and I might have a good drivers door for you. PM if your are interested.

Dave

DTerry · 12-09-2004, 09:10 AM

Bump - sorry.

LILREDGMC · 12-09-2004, 09:25 AM

You can email me or PM with an email address to send some pics. I can get more pics of specific areas. My prices were asking prices. Decent beds but not a rust free specimen. Problems were light surface underneath, and two small rust spots above the rear support on the floor. Gate was fair to poor, aftermarket or rust free used might be better. Parts in Pittsburgh area. One bed had western dual tanks, the other original with no add on tanks.

LILREDGMC

WILLNIK · 12-09-2004, 09:28 AM

DTerry,
I have some of the parts you need. Texas "rust free". I am 2 hours from you. E-mail me direct. Thanks, Terry

tmc04@yahoo.com

10-14-2004, 10:07 AM	#1
DTerry '70 GMC C-25 LWB Join Date: Oct 2004 Location: Binghamton, N.Y. Posts: 273	WTB - Bed/Box, Tailgate, LH Door, other parts, etc. Great site folks! We (I'm DTerry's dad) are looking for a bunch of parts to restore his 70 GMC LWB Fleetside. He's on a low budget - so aftermarket parts are looking too expensive. Parts must be within 4 hours (mapquest time) of ZIP code 13748 OR capable of shipping to this zip. Parts must be in good restorable condition (no holes - no bondo - some surface rust OK). Here's the list of what we're currently looking for. 1. Complete LWB FS box 2. Tailgate 3. Drivers side door 4. Rear roll pan 5. Parts needed to convert '70 GMC to '70 Chevy grill. We are actually thinking of removing all badges off this GMC 3/4 ton and making a lowered chevy 1/2 clone. The suspension is phase II of this project and will be looking to spend what we have left on that after the body is complete. If anyone has info on the tailgate covers and handle relocation thing, I'd be interested in hearing thoughts.

10-14-2004, 11:21 AM	#3
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	bed/truck I used to own the truck Hugger has. It is a very nice rust-free piece. I wish I could have kept it. I have to agree with him. It may be cheaper to swap everything over. Just a thought. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

10-14-2004, 01:43 PM	#4
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Those Arizona trucks sure get around LOL __________________ Arizona rust free sheetmetal

10-14-2004, 01:45 PM	#5
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	trucks Chuck, you big truck whore................... __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

10-15-2004, 09:07 PM	#6
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Parts How far are you from VT? More than 4hrs, I'd bet. I have some front end sheet metal here if your interested. Radiator supports also. Nothing for a long fleet though.

10-14-2004, 11:13 AM	#2
71HUGGER396 Confirmed Truckaholic Join Date: Oct 2000 Location: Sarver,PA 16055 Posts: 732	I have a 69 gmc that I'm parting out. It's from AZ, It's rust free. The frame is really clean and it's a 1/2 ton. Using this frame would alot easy then converting from 3/4to 1/2. The bed is rust free , the header panel is straight. I'm 5 1/2 hours from you, my zip is 16055. I know that it's over 4 hours, but I'm just throwing out to you. My cell # is 724-309-8991. I work different shifts, so if you leave a message, I will return you call.

10-16-2004, 10:28 AM	#7
LILREDGMC Registered User Join Date: Oct 2001 Location: Pittsburgh, Pennsylvania USA Posts: 461	Beds Two Colorado beds in Pittsburgh. One with twin tanks one stock. Sides are excellent, front panel same, floor has square rust above rear support on floor, about 2" x 2", two places. Not beat up but definately user friendly. $400 for twin tank $475 for stock, 1 has gate, but it is only fair, has some rust though. Email for pics.

10-17-2004, 12:17 AM	#8
Dave Reed Registered User Join Date: Nov 2003 Location: CT Posts: 290	I am less than 4 hours from you in CT and I might have a good drivers door for you. PM if your are interested. Dave

12-09-2004, 09:10 AM	#9
DTerry '70 GMC C-25 LWB Join Date: Oct 2004 Location: Binghamton, N.Y. Posts: 273	Bump - sorry.

12-09-2004, 09:25 AM	#10
LILREDGMC Registered User Join Date: Oct 2001 Location: Pittsburgh, Pennsylvania USA Posts: 461	Beds You can email me or PM with an email address to send some pics. I can get more pics of specific areas. My prices were asking prices. Decent beds but not a rust free specimen. Problems were light surface underneath, and two small rust spots above the rear support on the floor. Gate was fair to poor, aftermarket or rust free used might be better. Parts in Pittsburgh area. One bed had western dual tanks, the other original with no add on tanks. LILREDGMC

12-09-2004, 09:28 AM	#11
WILLNIK Senior Member Join Date: Jul 2000 Location: Newark, NY Posts: 626	DTerry, I have some of the parts you need. Texas "rust free". I am 2 hours from you. E-mail me direct. Thanks, Terry tmc04@yahoo.com __________________ 50 miles west of Syracuse, NY '94 Silverado swb '70 Chevelle '65 Corvette roadster '11 Tahoe (wifes ride)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.