Parting 78 K30 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jays68yak · 10-17-2004, 08:34 PM

I wont have this long. Axles, bed, tranny, tcase, motor, hydroboost are all taken.

Doors $60 for the pair. GONE
Fenders $10 each. GONE
Raidator $20
Manual steering non tilt column, with wheel and key $50
Heavy duty rear bumper, with 7 pin connector $40 GONE
Seat belts, maybe good for a retrofit into an older truck? $30
Qjet, off of an early 70s chevy, not sure if it needs a rebuild or not $40

If you are interested in any parts let me know.

mkundo · 10-18-2004, 12:49 AM

Looking for rear dually fenders and hardware.

jays68yak · 10-18-2004, 12:59 AM

sorry but its a single wheel rear.

beaterC10 · 10-18-2004, 08:32 AM

What shape are the doors in? I assume they are not power doors? Any pics?

landon4421 · 10-18-2004, 01:00 PM

axles

was it a 4x4, is it 3/4 or 1 ton

how much

thanks J :p

landon4421 · 10-18-2004, 01:01 PM

scratch the axle idea

I need to learn to read

Devil'S Ride · 10-18-2004, 02:29 PM

what trans and t-case was it? I need a speedo cable for a 465/205 reg cab longbox....

jays68yak · 10-19-2004, 02:55 PM

Quote:

Originally Posted by Devil'S Ride

what trans and t-case was it? I need a speedo cable for a 465/205 reg cab longbox....

thats what it was but I think they at one point cut it out cuz I didnt see it when I pulled the tranny. Ill check when I go back to it.

jays68yak · 10-19-2004, 02:56 PM

Quote:

Originally Posted by beaterC10

What shape are the doors in? I assume they are not power doors? Any pics?

http://www.pnkages.com/images/78ChevyTruck/DSCN0673.JPG
thats the only pic i have for now. Other then that dent I didnt see anything on the passanger side. The drives has a crack around the hinge mount. Should be an easy fix with a welder. Yeah and not power.

jays68yak · 10-19-2004, 02:58 PM

Quote:

Originally Posted by landon4421

scratch the axle idea

I need to learn to read

Dont worry, I have this on a few boards and I have had atleast one person ask about them axles on ever board.

jays68yak · 10-19-2004, 10:03 PM

as long as i get a junk slip this week, then its going to the crusher this week.

Devil'S Ride · 10-20-2004, 02:14 AM

did you get a chance to look for that speedo cable? thanks!

jays68yak · 10-20-2004, 02:51 AM

Quote:

Originally Posted by Devil'S Ride

did you get a chance to look for that speedo cable? thanks!

Yeah and half of it is there.

The other half got eatten by something.

jays68yak · 10-20-2004, 02:52 AM

Quote:

Originally Posted by jays68yak

http://www.pnkages.com/images/78ChevyTruck/DSCN0673.JPG
thats the only pic i have for now. Other then that dent I didnt see anything on the passanger side. The drives has a crack around the hinge mount. Should be an easy fix with a welder. Yeah and not power.

more pics:
http://www.pnkages.com/images/78ChevyTruck/

jays68yak · 10-22-2004, 01:07 AM

updated ttt

ch4x477 · 10-29-2004, 07:47 AM

Still have those doors ? What kind of shape are they in ? Also what style mirrors did or do they have ? Thanks. Where is Danville ? Im in Los Angeles.

jays68yak · 10-29-2004, 01:41 PM

Im in norcal. They arnt bad IMO, specially for the price. The drivers side upper hinge mount has a crack around it. You should beable to see the pics: http://www.pnkages.com/images/78ChevyTruck/
And you can see the mirrors in the pics.

jays68yak · 11-03-2004, 12:22 AM

TOP!!!!!!!!!!!!!!!!!!!!!!!!!!

jays68yak · 11-05-2004, 06:02 AM

top

Blue Beard · 11-05-2004, 11:53 AM

Is the gauge unit intact? Any pics...?

jays68yak · 11-05-2004, 03:56 PM

Quote:

Originally Posted by Blue Beard

Is the gauge unit intact? Any pics...?

Sold it already.

jays68yak · 11-10-2004, 11:31 PM

Top Make offers I want the stuff gone.

benoit454 · 11-28-2004, 10:28 PM

Can the fenders be shipped?

I am trying to get another cab for my 76 and then I can use thoose fenders but only if they can be shipped to 25636 wv.

jays68yak · 11-28-2004, 10:32 PM

Quote:

Originally Posted by benoit454

Can the fenders be shipped?

I am trying to get another cab for my 76 and then I can use thoose fenders but only if they can be shipped to 25636 wv.

Sorry but I gave them away the other day.

10-17-2004, 08:34 PM	#1
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	Parting 78 K30 I wont have this long. Axles, bed, tranny, tcase, motor, hydroboost are all taken. Doors $60 for the pair. GONE Fenders $10 each. GONE Raidator $20 Manual steering non tilt column, with wheel and key $50 Heavy duty rear bumper, with 7 pin connector $40 GONE Seat belts, maybe good for a retrofit into an older truck? $30 Qjet, off of an early 70s chevy, not sure if it needs a rebuild or not $40 If you are interested in any parts let me know. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. " Last edited by jays68yak; 11-28-2004 at 10:32 PM.

10-18-2004, 12:49 AM	#2
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	L/R fenders Looking for rear dually fenders and hardware.

10-18-2004, 12:59 AM	#3
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	sorry but its a single wheel rear. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

10-18-2004, 01:00 PM	#5
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	axles was it a 4x4, is it 3/4 or 1 ton how much thanks J :p __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

10-18-2004, 01:01 PM	#6
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	scratch the axle idea I need to learn to read __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

10-18-2004, 08:32 AM	#4
beaterC10 Senior Member Join Date: Jul 2003 Location: Indianapolis, IN Posts: 1,277	What shape are the doors in? I assume they are not power doors? Any pics?

10-18-2004, 02:29 PM	#7
Devil'S Ride Registered User Join Date: Nov 2003 Location: Grants PassOregon Posts: 335	what trans and t-case was it? I need a speedo cable for a 465/205 reg cab longbox.... __________________ The Devil 1983 ONE TON 454/400/208 11" of lift on 44's

10-19-2004, 10:03 PM	#11
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	as long as i get a junk slip this week, then its going to the crusher this week. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

10-20-2004, 02:14 AM	#12
Devil'S Ride Registered User Join Date: Nov 2003 Location: Grants PassOregon Posts: 335	did you get a chance to look for that speedo cable? thanks! __________________ The Devil 1983 ONE TON 454/400/208 11" of lift on 44's

10-22-2004, 01:07 AM	#15
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	updated ttt __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

10-29-2004, 07:47 AM	#16
ch4x477 Registered User Join Date: Apr 2004 Location: San Fernando Valley (Los Angeles) CA Posts: 41	Still have those doors ? What kind of shape are they in ? Also what style mirrors did or do they have ? Thanks. Where is Danville ? Im in Los Angeles.

10-29-2004, 01:41 PM	#17
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	Im in norcal. They arnt bad IMO, specially for the price. The drivers side upper hinge mount has a crack around it. You should beable to see the pics: http://www.pnkages.com/images/78ChevyTruck/ And you can see the mirrors in the pics. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

11-03-2004, 12:22 AM	#18
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	TOP!!!!!!!!!!!!!!!!!!!!!!!!!! __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

11-05-2004, 06:02 AM	#19
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	top __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

11-05-2004, 11:53 AM	#20
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Is the gauge unit intact? Any pics...? __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo



Register or Log In To remove these advertisements.

11-10-2004, 11:31 PM	#22
jays68yak Registered User Join Date: Oct 2002 Location: Gilroy, CA Posts: 1,454	Top Make offers I want the stuff gone. __________________ 1969 Chevy Project SWB Fleet, 20s, 5.3, t56, in the weeds. 1970 Chevy Truck cab on a 1979 Jimmy frame-8.1 liter 496 bbc/sm465/np203-jeds doubler-np205/d60/14bff Welded/42 tsls on recentered H1s 1998 Chevy Crew Cab K3500 SAS'd with hpd60, links and swayaway coilovers. 8.1l vortec DD/towrig "I like long walks, especially when they are taken by people who annoy me. "

11-28-2004, 10:28 PM	#23
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	fenders? Can the fenders be shipped? I am trying to get another cab for my 76 and then I can use thoose fenders but only if they can be shipped to 25636 wv.

Register or Log In To remove these advertisements.