What is this used for? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skokie · 11-01-2004, 12:50 AM

I found this piece tonight. It looks like it goes on driver side rear of a quadrajet but what is it for?

Thanks

BobS · 11-01-2004, 01:02 AM

A mount for the throttle return spring?

Bob

skokie · 11-01-2004, 01:04 AM

Thats what I was thinking Bob. The spring would connect to the back. What about that hole toward the front there?

BobS · 11-01-2004, 01:13 AM

It could be to mount to another bracket maybe? I don't know of anything that could go there but then all of my trucks were thoroughly molested prior to my buying them so I've never seen a factory setup.

Bob

leadfoot067 · 11-01-2004, 01:46 AM

its the throttle cable bracket......bolts on thru the rear carb stud,and the other bigger hole in it is where the throttle cable goes thru,then the other tab is for the return spring.

11-01-2004, 12:50 AM	#1
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,334	What is this used for? I found this piece tonight. It looks like it goes on driver side rear of a quadrajet but what is it for? Thanks Attached Images __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

11-01-2004, 01:02 AM	#2
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 568	A mount for the throttle return spring? Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

11-01-2004, 01:04 AM	#3
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,334	Thats what I was thinking Bob. The spring would connect to the back. What about that hole toward the front there? __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

11-01-2004, 01:13 AM	#4
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 568	It could be to mount to another bracket maybe? I don't know of anything that could go there but then all of my trucks were thoroughly molested prior to my buying them so I've never seen a factory setup. Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

11-01-2004, 01:46 AM	#5
leadfoot067 horsepower junkie Join Date: Aug 2003 Location: graham, washington Posts: 326	its the throttle cable bracket......bolts on thru the rear carb stud,and the other bigger hole in it is where the throttle cable goes thru,then the other tab is for the return spring. __________________ 67 short wide box,350/700r4/3.73posi 71 olds cutlass "S" mom bought new..12.30s@113MPH



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.