67 3/4 LB Whole or parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hotrodhenryj · 11-02-2004, 12:28 PM

I have this truck that I will sell whole or for parts. I have a transport going to Illinois in the next few weeks and can have it delivered along the route for approx. 7-800 depending where you are located. Truck has minimal rust from heater leak in pass rocker, floors are rust free. Truck is very straight no visible damage that I have found except the tailgate. The truck is a driver now and will be removing the drive train on sale. All parts that are needed to install another motor will be included (ie engine and trans mounts, radiator, driveshaft). I am asking 1250 for the body or sell parts. Bed with gate, 450, small window cab w/doors and large speaker holes, all attaching parts 500., front clip with inners and hood, no ovals in grill 400. More pics on request, and I know I wish everyone was closer also, and this stuff would be gone. Thanks for your interest. Chuck

Forgot to mention that this has air bag suspension and onbaord compressor/I got the compressor to work but has leak in one of the plastic lines. Looks like the same stuff they use to lower truck.

Blue_71 · 11-02-2004, 12:38 PM

would you cut parts out of the cab to sell (like the left rear door pillar around the vin? do you have a clear title for it?

Hotrodhenryj · 11-02-2004, 12:59 PM

No I would not cut a almost mint cab for just that part. I have a clear AZ title that will go with the truck or cab and doors.

Blue_71 · 11-02-2004, 03:35 PM

completly understandable

didnt relieze you were in arizona when i asked

silvertonguedevil · 11-02-2004, 03:42 PM

It looks too nice to part

luckydog · 11-02-2004, 03:58 PM

How much for just the fenders shipped as close to MI as possible?

shade67 · 11-02-2004, 08:17 PM

is it a high hump or low hump cab???

Hotrodhenryj · 11-02-2004, 09:30 PM

Luckydog: Lets see if someone wants the whole thing before I start selling it by the piece

shade67: This is the high hump cab

Hotrodhenryj · 11-03-2004, 01:26 PM

Feel free to make me an offer or trade me something I can use (ie: performance parts, tools, ect.)

71hugorng · 11-06-2004, 08:25 AM

TTT for ya chuck it would be a shame to have only one truck on a trailer from arizona to illinois.

11-02-2004, 12:28 PM	#1
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	67 3/4 LB Whole or parts I have this truck that I will sell whole or for parts. I have a transport going to Illinois in the next few weeks and can have it delivered along the route for approx. 7-800 depending where you are located. Truck has minimal rust from heater leak in pass rocker, floors are rust free. Truck is very straight no visible damage that I have found except the tailgate. The truck is a driver now and will be removing the drive train on sale. All parts that are needed to install another motor will be included (ie engine and trans mounts, radiator, driveshaft). I am asking 1250 for the body or sell parts. Bed with gate, 450, small window cab w/doors and large speaker holes, all attaching parts 500., front clip with inners and hood, no ovals in grill 400. More pics on request, and I know I wish everyone was closer also, and this stuff would be gone. Thanks for your interest. Chuck Forgot to mention that this has air bag suspension and onbaord compressor/I got the compressor to work but has leak in one of the plastic lines. Looks like the same stuff they use to lower truck. Attached Images __________________ Arizona rust free sheetmetal

11-02-2004, 12:59 PM	#3
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	No I would not cut a almost mint cab for just that part. I have a clear AZ title that will go with the truck or cab and doors. __________________ Arizona rust free sheetmetal

11-02-2004, 03:42 PM	#5
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	It looks too nice to part __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

11-02-2004, 03:58 PM	#6
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	How much for just the fenders shipped as close to MI as possible? __________________ Horsepower is how FAST you hit the wall, torque is how HARD

11-02-2004, 08:17 PM	#7
shade67 Registered User Join Date: Jan 2004 Location: Portage, WI Posts: 89	cab is it a high hump or low hump cab??? __________________ Scott 66 chevy short step 327 4speed 67 chevy Short Fleet tpi 350 700r4 72 chevy K10 swb 01 GMC Sierra 01 Pontiac Bonneville

11-02-2004, 09:30 PM	#8
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Luckydog: Lets see if someone wants the whole thing before I start selling it by the piece shade67: This is the high hump cab __________________ Arizona rust free sheetmetal

11-03-2004, 01:26 PM	#9
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Feel free to make me an offer or trade me something I can use (ie: performance parts, tools, ect.) __________________ Arizona rust free sheetmetal

11-06-2004, 08:25 AM	#10
71hugorng Registered User Join Date: Dec 2002 Location: northern Illinois Posts: 14	TTT for ya chuck it would be a shame to have only one truck on a trailer from arizona to illinois.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.