|
11-04-2004, 08:19 PM
|
#1 |
|
Registered User
Join Date: Jan 2002
Location: Henderson, NV
Posts: 358
|
Copperhead
GM had Copperhead on display at the SEMA show. It looks real good but sits to high for me.
__________________
1980 Chevy Shortbed Pickup 1969 Z28 engine Turbo 350 |
|
|
|
11-04-2004, 08:27 PM
|
#2 | |
|
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,468
|
Quote:
 WHAT, NO PIC'S, THIS THREAD IS POINTLESS J/J WISH I COULD HAVE SEEN IT IN PERSON.  
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
|
|
|
|
|
11-04-2004, 10:17 PM
|
#3 |
|
Where's my beer?
Join Date: Oct 2004
Location: Glen Allen, VA
Posts: 1,772
|
You mean it's actually finished? I HATE how shows get you so involved in an ongoing project and then don't show you the finished project, then move onto another project. I couldn't care less about the Sargeant Rock project without seeing Copperhead done. I want to hear that 572 roar! Horespower's Nova is another good example. Let's see a full pass on it!
|
|
|
|
|
11-04-2004, 10:33 PM
|
#4 |
|
PROJECT 7DEUCE
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,606
|
Yepcopper head has been done.... Any bet's on when will air on tv..
__________________
GO BIG GREEN  GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
11-04-2004, 10:44 PM
|
#5 |
|
Senior Member
Join Date: May 2004
Location: Seaside, Oregon
Posts: 1,789
|
Next June at this rate
__________________
-Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4 |
|
|
|
|
11-05-2004, 06:32 AM
|
#6 |
|
Registered User
Join Date: Oct 2004
Location: Oklahoma
Posts: 261
|
Well dont blame it on Stacy, i am sure it was a corporate thing!
|
|
|
|
|
11-05-2004, 09:22 AM
|
#7 |
|
Registered User
Join Date: Sep 2003
Location: Franconia,N.H.
Posts: 1,029
|
I can't believe that it's actually finished!!!
 I wish they'd air the the finished project and hear it run 
__________________
(Only) Member of the CPNE Fan Club  Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver) |
|
|
|
|
11-05-2004, 09:27 AM
|
#8 |
|
Senior Member
Join Date: Dec 2003
Location: Pampa, Texas
Posts: 1,553
|
Yea Gm Can't Let The General Public See It Before The People Who Pay To See New And Never Seen Before Cars And Trucks. Don't Blame Stacey He Is Just A Monkey On A String....
__________________
https://www.ebay.com/itm/29620574751...mis&media=COPY |
|
|
|
|
11-05-2004, 01:19 PM
|
#9 |
|
Registered User
Join Date: Jun 2003
Location: Pike County, KY
Posts: 89
|
I don't understand why they do this. People who have never even watched the show saw it before we did. All those Saturdays and Sundays afternoons spent waiting for them to finish, almost wasted. They should at least post a mp3 or wav of that 572. Maybe even a MPEG movie of it on a back road. "Another highlight of the GM Service and Parts Operations presence at SEMA will be a 1967 Chevy C10 short bed fleetside pickup with the GM Performance Parts 620-horsepower, 572-cubic-inch crate engine (ZZ572) and packed with performance and appearance components. Stacey David, producer/host of Trucks! TV on the Spike TV cable network, designed and built the truck and named it "Copperhead" because of its quick-strike capabilities." - http://www.theautochannel.com/news/2...22/260427.html  = Me behind the wheel of Copperhead.
__________________
MEMBER OF THE BUCKET SEAT CLUB (REAL BUCKETS) "Color Me Gone" - Two Lanes of Blacktop Last edited by ale8oneboy; 11-05-2004 at 01:22 PM. |
|
|
|
|
11-05-2004, 04:29 PM
|
#10 |
|
computer illiterate
Join Date: Jan 2001
Location: Des Moines, IA
Posts: 6,440
|
here are some pics from the sema show
__________________
72 2wd blazer 72 swb 4x4 |
|
|
|
|
11-05-2004, 04:31 PM
|
#11 |
|
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,733
|
|
|
|
|
|
11-05-2004, 05:07 PM
|
#12 |
|
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,468
|
Keith, Have Any Full Size Ones ???
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
|
|
|
|
11-05-2004, 05:19 PM
|
#13 |
|
Senior Member
Join Date: Jun 2003
Location: Westminster, CO
Posts: 3,071
|
Here is a pic:
__________________
Alex 1971 Lil' Red 350 SBC 700R4 |
|
|
|
|
11-05-2004, 07:55 PM
|
#14 |
|
Account Suspended
Join Date: Jul 2003
Posts: 1,284
|
I saw it at SEMA also, if it is done they have alot to learn about building trucks
The A/C compressor is mounted upside down and no lines are on it, the body panels a lined up so well they can't shut the hood w/out hitting the fenders, the bed is about 3/4 of an inch to the right and about an inch higher than the cab, the bumpers look like a blind man mounted them (the rear one sticks out about 3 inches from the bed), bondo can be seen where they filled the stake pockets, the exhaust is not completed, any attention to detail has been over looked, the bed wood hasn't been treated, the door gaps are terrible (almost hits in the back and an inch of gap in the front) IMO they threw it together so GM could have it in thier display (it was probably a stipulation made by GM since they sponsored the engine it would be at SEMA). Whoever sprayed and rubbed out the truck did a great job, but whoever put it together needs to go back and try again. 
|
|
|
|
|
11-05-2004, 08:08 PM
|
#15 |
|
Senior Member
Join Date: May 2004
Location: Seaside, Oregon
Posts: 1,789
|
Check out.... http://www.paintucation.com/copperhead.htm
for some more pics...
__________________
-Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4 |
|
|
|
|
11-05-2004, 11:08 PM
|
#16 |
|
Happy to be here
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
I found one. Check out the goober leaning on the paint....
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
|
|
|
11-05-2004, 11:16 PM
|
#17 |
|
Recovering 67-72 Addict
Join Date: Oct 2000
Location: North Bend, WA
Posts: 1,788
|
I can't tell from the pics but it doesn't look like it has that fancy nitrous intake on it that they were making a big deal about.
__________________
68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women" |
|
|
|
|
11-05-2004, 11:18 PM
|
#18 | |
|
Account Suspended
Join Date: May 2002
Location: I let ya know as soon as I know
Posts: 3,593
|
Quote:
|
|
|
|
|
|
11-05-2004, 11:26 PM
|
#19 | |
|
Next project: 1970 K10
Join Date: Feb 2004
Location: Fort Collins, Colo 80524
Posts: 6,684
|
Quote:
__________________
Bob 1970 Chevy K10 LWB "Goldie" 350/TH350 next project!! 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE |
|
|
|
|
|
11-05-2004, 11:27 PM
|
#20 |
|
Senior Member
Join Date: May 2004
Location: Seaside, Oregon
Posts: 1,789
|
Aren't people amazing?
__________________
-Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4 |
|
|
|
|
11-05-2004, 11:39 PM
|
#21 |
|
Got Light Emitting Diode?
Join Date: Apr 2004
Location: Newberg, OR
Posts: 2,485
|
id slap him so hard his third eye would pucker
__________________
1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's  (the family car)1993 Cherokee work ride/weekend wheeler |
|
|
|
|
11-06-2004, 12:01 AM
|
#22 |
|
Registered User
Join Date: Sep 2004
Location: Burnet, Texas
Posts: 53
|
I guess if I just built mine to show I'd be pissed about the paint to. I'm all about driving mine though. Just like my Harley. Dechrome it, add some flat wrinkle black and line-x to it and drive it (or ride it) like you stole it. I'd rather be running the streets that in the drive-way with my Mother's Car wax and California duster.
__________________
My girlfriend caught me cheatin on her with another woman and now she's threatening to tell my wife! ____________________________________ 71 Chevy lwb Rough and Ready Baby!!
|
|
|
|
|
11-06-2004, 12:43 AM
|
#23 |
|
Registered User
Join Date: Jan 2002
Location: Henderson, NV
Posts: 358
|
Copperhead
LUV2XCLR8 It's pointless to bring a camera to the SEMA show. I used to but not anymore. To many people standing in your way and to much stuff. If I knew Copperhead was going to be there I might have tried to get a picture.
__________________
1980 Chevy Shortbed Pickup 1969 Z28 engine Turbo 350 |
|
|
|
|
11-06-2004, 01:08 AM
|
#24 |
|
Registered User
Join Date: Nov 2003
Location: Bremerton, WA.
Posts: 104
|
I wasn't that impressed with it at all, didn't even get the camera out of my pocket for it.
|
|
|
|
|
11-06-2004, 12:13 PM
|
#25 |
|
Registered User
Join Date: Dec 2001
Location: Pace, FL
Posts: 2,155
|
I thought it had big funky ugly roundish squarish exhaust tips coming out of the front lower part of the bed with some hideous thick steel plate around them? I watched like one episode, and after I saw Stacey make those and cut a huge hole in the brand new bedpanels, I wasn't too impressed. That and the constant giggling almost made me scream at the TV so I never watched it again.
The guy that did the paint did a nice job though.
__________________
1942 Master Deluxe 1969 C/10 1985 Blazer CUCV 1987 Jimmy 2004 Tahoe 2005 Silverado 1500 2005 Silverado 3500 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
