Anyone interested in a 66 Chevelle 12 bolt posi? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72C203503ONTHETREE · 11-10-2004, 12:03 AM

I have a complete 12 bolt posi rear from a 66 El Camino, which is the same as a Malibu or SS396. It has a 3.23 or 3.31 ratio and is a factory positraction. Has aluminum rear cover and a complete set of traction bars to go along with it. I am asking $200 OBO picked up in NE Alabama or maybe within a reasonable driving distance. I was going to put it in my 83 El Camino but need the money and would take some fabrication to make it work anyway.

breeh · 11-10-2004, 01:11 AM

Not a bad price. I wish that I was closer.

bobs409 · 11-10-2004, 08:44 AM

Dang! My '66 Chevelle and I sure wish you were closer too.

Tx Firefighter · 11-10-2004, 09:06 AM

Seriously, triple your price and post it for sale over on Chevelles.com

That 12 bolt is worth a fortune. I've seen them go for 1k bucks before.

**bigunde** · 11-10-2004, 09:52 AM

PM sent.My 66 tempest needs some more sure footing on the rear

Joe67 · 11-10-2004, 11:31 AM

Quote:

Originally Posted by 72C203503ONTHETREE

I have a complete 12 bolt posi rear from a 66 El Camino, which is the same as a Malibu or SS396. It has a 3.23 or 3.31 ratio and is a factory positraction. Has aluminum rear cover and a complete set of traction bars to go along with it. I am asking $200 OBO picked up in NE Alabama or maybe within a reasonable driving distance. I was going to put it in my 83 El Camino but need the money and would take some fabrication to make it work anyway.

PM Sent

72C203503ONTHETREE · 11-10-2004, 01:53 PM

I would ask more but I only paid $200 for it so I am not going to rip anyone else off. The posi unit will probably need to be rebuilt, its a little weak but they are easy to do and not bad as far as parts prices. I am only selling it since I need the money more than a rear end right now. I will probably go with a Dana 60 for the El Camino when I get the money and time to do it, in like two years once I am out of college. PM's sent to whomever wanted one.

72C203503ONTHETREE · 11-10-2004, 02:05 PM

I will be driving from Alabama to Iowa this thanksgiving week and can deliver on the way if anyone lives near interstates 65, 24, 57, and 74. I am in NE alabama and will be going to SE Iowa near the Quad Cities. I am near Huntsville and will be driving through there to 65 north, going through Nashville, Paducah, Kentucky, Champaign, Illinois, Peoria, etc.. I can go close to St. Louis also. I am getting pictures today also and will get the codes off the axle so somebody can make a definate ID of what it came out of and what gear ratio it is.

kxmotox247 · 11-10-2004, 02:20 PM

pm sent - I live in Champaign

72C203503ONTHETREE · 11-10-2004, 03:24 PM

Pending sale to bigunde.

KX-you have a PM

11-10-2004, 12:03 AM	#1
72C203503ONTHETREE Registered User Join Date: Apr 2004 Location: Grant, Alabama Posts: 504	Anyone interested in a 66 Chevelle 12 bolt posi? I have a complete 12 bolt posi rear from a 66 El Camino, which is the same as a Malibu or SS396. It has a 3.23 or 3.31 ratio and is a factory positraction. Has aluminum rear cover and a complete set of traction bars to go along with it. I am asking $200 OBO picked up in NE Alabama or maybe within a reasonable driving distance. I was going to put it in my 83 El Camino but need the money and would take some fabrication to make it work anyway. __________________ 72 Chevy C20, SOLD (Dang it.) 09 Challanger RT six speed in all black. 74 Datsun 710 wagon, all 1.8 liters of screaming Datsun power. 73 C10 long bed, 350/350 combo, nice shape.

11-10-2004, 01:11 AM	#2
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	Not a bad price. I wish that I was closer. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

11-10-2004, 08:44 AM	#3
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Dang! My '66 Chevelle and I sure wish you were closer too. __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

11-10-2004, 09:06 AM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Seriously, triple your price and post it for sale over on Chevelles.com That 12 bolt is worth a fortune. I've seen them go for 1k bucks before. __________________ I'm on the Instagram- @Gearhead_Kevin

11-10-2004, 01:53 PM	#7
72C203503ONTHETREE Registered User Join Date: Apr 2004 Location: Grant, Alabama Posts: 504	I would ask more but I only paid $200 for it so I am not going to rip anyone else off. The posi unit will probably need to be rebuilt, its a little weak but they are easy to do and not bad as far as parts prices. I am only selling it since I need the money more than a rear end right now. I will probably go with a Dana 60 for the El Camino when I get the money and time to do it, in like two years once I am out of college. PM's sent to whomever wanted one. __________________ 72 Chevy C20, SOLD (Dang it.) 09 Challanger RT six speed in all black. 74 Datsun 710 wagon, all 1.8 liters of screaming Datsun power. 73 C10 long bed, 350/350 combo, nice shape.

11-10-2004, 09:52 AM	#5
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	PM sent.My 66 tempest needs some more sure footing on the rear

11-10-2004, 02:05 PM	#8
72C203503ONTHETREE Registered User Join Date: Apr 2004 Location: Grant, Alabama Posts: 504	I will be driving from Alabama to Iowa this thanksgiving week and can deliver on the way if anyone lives near interstates 65, 24, 57, and 74. I am in NE alabama and will be going to SE Iowa near the Quad Cities. I am near Huntsville and will be driving through there to 65 north, going through Nashville, Paducah, Kentucky, Champaign, Illinois, Peoria, etc.. I can go close to St. Louis also. I am getting pictures today also and will get the codes off the axle so somebody can make a definate ID of what it came out of and what gear ratio it is. __________________ 72 Chevy C20, SOLD (Dang it.) 09 Challanger RT six speed in all black. 74 Datsun 710 wagon, all 1.8 liters of screaming Datsun power. 73 C10 long bed, 350/350 combo, nice shape.

11-10-2004, 02:20 PM	#9
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,397	pm sent - I live in Champaign __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com

11-10-2004, 03:24 PM	#10
72C203503ONTHETREE Registered User Join Date: Apr 2004 Location: Grant, Alabama Posts: 504	Pending sale to bigunde. KX-you have a PM __________________ 72 Chevy C20, SOLD (Dang it.) 09 Challanger RT six speed in all black. 74 Datsun 710 wagon, all 1.8 liters of screaming Datsun power. 73 C10 long bed, 350/350 combo, nice shape.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.