WTB exhaust manifolds - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blitz'd · 11-10-2004, 11:42 PM

I need some good cheap manifolds for a 350 in my k5 preferably in DFW. Just the early ones, no emissions stuff. Im tired of exhaust smell in the cabin.

Jonboy · 11-11-2004, 12:35 AM

Joey, I have a set off of an '85 Trans Am you can have, but they have the AIR tubes on them. I think you can get some pipe plugs for teh holes, though.

cobb_ben · 11-11-2004, 10:51 AM

I have a set off of a 1994 GMC 1500, no air in 63344

blitz'd · 11-11-2004, 03:23 PM

Quote:

Originally Posted by Jonboy

Joey, I have a set off of an '85 Trans Am you can have, but they have the AIR tubes on them. I think you can get some pipe plugs for teh holes, though.

Hey thanks Jon i might take you up on that if i cant find any with out the AIR tubes. I replaced the gaskets twice but they keep leaking. The passenger side was really warped, had no gaskets on that side which explains that ticking sound it had.

Would the 94s work? Its pre vortec right?

Destructo · 11-11-2004, 10:08 PM

I got a set off an early (3970010) 350 engine with 882 heads, they didn't leak when I took them off for headers.

How does 20 bucks plus shipping sound? No A.I.R, also have some 305 manifolds, the kind that go over the spark plugs, no A.I.R.

The 350 manifold don't have a heater valve in them either, the valve that operates on vacuum to heat the intake up quicker.

blitz'd · 11-12-2004, 03:06 PM

Hey jon those T/A manifolds go over the spark plugs right? I dont think the exit flanges would line back up to the ones on the truck now.

Destructo i sent you a pm.

Jonboy · 11-12-2004, 04:09 PM

I think they do, but I will have to check tonight.

junkyardpartseeker · 11-13-2004, 11:51 AM

Quote:

Originally Posted by Destructo

I got a set off an early (3970010) 350 engine with 882 heads, they didn't leak when I took them off for headers.

How does 20 bucks plus shipping sound? No A.I.R, also have some 305 manifolds, the kind that go over the spark plugs, no A.I.R.

The 350 manifold don't have a heater valve in them either, the valve that operates on vacuum to heat the intake up quicker.

I would be interested in a set without the emission and without air holes for a 350 motor. Don't need the heater valve provision either. Mine go over the spark plugs.
Let me know shipping to 72206 Little Rock,AR

Tommy

11-10-2004, 11:42 PM	#1
blitz'd vintage car junkie Join Date: Aug 2004 Location: DFW Posts: 217	WTB exhaust manifolds I need some good cheap manifolds for a 350 in my k5 preferably in DFW. Just the early ones, no emissions stuff. Im tired of exhaust smell in the cabin. __________________ 1950 chevy truck, s10 swap, bagged, v8, 18s My build: http://67-72chevytrucks.com/vboard/s...d.php?t=392761

11-11-2004, 12:35 AM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Joey, I have a set off of an '85 Trans Am you can have, but they have the AIR tubes on them. I think you can get some pipe plugs for teh holes, though. __________________ 1974 Jimmy- 5.3/4L80e/NP241

11-11-2004, 10:08 PM	#5
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	I got a set off an early (3970010) 350 engine with 882 heads, they didn't leak when I took them off for headers. How does 20 bucks plus shipping sound? No A.I.R, also have some 305 manifolds, the kind that go over the spark plugs, no A.I.R. The 350 manifold don't have a heater valve in them either, the valve that operates on vacuum to heat the intake up quicker. __________________ 1985 Scottsdale Shortbed 4x4 Stout 350 with some "upgrades"-700r4-33x12.5" Mud Tires, Warn 8274-50 winch. 2005 Chevrolet Colorado Regular Cab 2wd 4-banger, 5 speed, Street Pack with 3.73 axle.

11-12-2004, 03:06 PM	#6
blitz'd vintage car junkie Join Date: Aug 2004 Location: DFW Posts: 217	Hey jon those T/A manifolds go over the spark plugs right? I dont think the exit flanges would line back up to the ones on the truck now. Destructo i sent you a pm. __________________ 1950 chevy truck, s10 swap, bagged, v8, 18s My build: http://67-72chevytrucks.com/vboard/s...d.php?t=392761

11-12-2004, 04:09 PM	#7
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	I think they do, but I will have to check tonight. __________________ 1974 Jimmy- 5.3/4L80e/NP241

11-11-2004, 10:51 AM	#3
cobb_ben Registered User Join Date: Feb 2004 Location: Fort Leonard Wood Mo Posts: 299	I have a set off of a 1994 GMC 1500, no air in 63344



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.