Rust Free 1968 GMC Cab F/S - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DirtyLarry · 11-12-2004, 05:55 PM

Here you go salt belt truckersâ€¦.

This will be one of the cleanest cabs around for sale that will make your rusty 67-72 project much easier. The cab is still mounted on the chassis with the front clip attached less the right fender and bumper. The bed and rear axle are also gone.

The truck is a 1500 2wd long bed that had a 305 V-6 and a NP435 trans.

The Good:
Rust free cab still wearing the original paint
Clear Colorado title
High removable transmission tunnel. Cab would work great for a 4x4 or 4x2, auto or manual
No body filler anywhere
Doors rust and dent free
Cab corners perfect
Rocker panels perfect
Hood rust free (GMC letters still on hood)
The left front fender, hood, quad head light grill and radiator support all convienatly mounted on the cab and chassis for easy hauling.
Chassis still has the NP435 manual trans mounted in it
Truck driven in a state where road salt is not used
Last registered in 1991 and stored in a dry climate

The not so Good:
Non-A/C cab
Many holes drilled in the doors over the years to accommodate different mirrors
Small surface rust spot on driverâ€™s side floorboard.
Radio mounting surface has been hacked out to accommodate an aftermarket radio
Windshield cracked
Dash pad very cracked
Missing right front fender
Missing fuel tank
Missing heater control head
Missing front seat
Small dents in left front fender (repairable)
Manual brakes
Manual Steering

$1300 for the cab and chassis with front clip or $1100 for the cab only. Truck is located in Pueblo, Colorado. May consider delivery for an added fee depending on your location.

Please PM me if you are seriously interested. More Pictures here -> http://chevytruckworld.tenmagazines....24-album-12773

crosby · 11-13-2004, 01:44 AM

nice truck, I've got to stop spending for a while though. maybe I will check back and see if you still have it later? Thanks, good luck!

crosby

DirtyLarry · 11-15-2004, 08:02 PM

Over 200 views and nobody wants to travel to the southwest for a clean cab?

DirtyLarry · 11-22-2004, 06:42 PM

DirtyLarry · 12-06-2004, 07:48 PM

Zumo · 12-08-2004, 01:01 PM

I want it but alas I have no cash. I want to get a cab some day with a floor shift for my 68 project. I even have family that live in Pueblo. Of that family I have an Aunt and Uncle that live right across the street from the fair grounds.

*Randy70C-10* · 12-08-2004, 09:00 PM

Sh!t, to this day I have never seen a cab like that. Every cab in this state has the cab corners, rockers, and half of the damn floor rusted away, and in some cases even a portion of the firewall. I'd love to have a cab like that, I wish it wasn't so far. I probably have more than you're asking invested in patch panels, wire and C02/argon.

**lolife99** · 12-08-2004, 10:34 PM

Sent you a PM!

jgvallie · 12-13-2004, 04:56 PM

do you still have it for sale?

DirtyLarry · 12-14-2004, 06:38 PM

Quote:

Originally Posted by jgvallie

do you still have it for sale?

Yes, I still have it.

DirtyLarry · 12-15-2004, 09:21 PM

Sold

11-12-2004, 05:55 PM	#1
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	Rust Free 1968 GMC Cab F/S - CO Here you go salt belt truckersâ€¦. This will be one of the cleanest cabs around for sale that will make your rusty 67-72 project much easier. The cab is still mounted on the chassis with the front clip attached less the right fender and bumper. The bed and rear axle are also gone. The truck is a 1500 2wd long bed that had a 305 V-6 and a NP435 trans. The Good: Rust free cab still wearing the original paint Clear Colorado title High removable transmission tunnel. Cab would work great for a 4x4 or 4x2, auto or manual No body filler anywhere Doors rust and dent free Cab corners perfect Rocker panels perfect Hood rust free (GMC letters still on hood) The left front fender, hood, quad head light grill and radiator support all convienatly mounted on the cab and chassis for easy hauling. Chassis still has the NP435 manual trans mounted in it Truck driven in a state where road salt is not used Last registered in 1991 and stored in a dry climate The not so Good: Non-A/C cab Many holes drilled in the doors over the years to accommodate different mirrors Small surface rust spot on driverâ€™s side floorboard. Radio mounting surface has been hacked out to accommodate an aftermarket radio Windshield cracked Dash pad very cracked Missing right front fender Missing fuel tank Missing heater control head Missing front seat Small dents in left front fender (repairable) Manual brakes Manual Steering $1300 for the cab and chassis with front clip or $1100 for the cab only. Truck is located in Pueblo, Colorado. May consider delivery for an added fee depending on your location. Please PM me if you are seriously interested. More Pictures here -> http://chevytruckworld.tenmagazines....24-album-12773 Attached Images __________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram Last edited by DirtyLarry; 12-01-2004 at 11:33 PM. Reason: Add State

11-13-2004, 01:44 AM	#2
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	68 cab nice truck, I've got to stop spending for a while though. maybe I will check back and see if you still have it later? Thanks, good luck! crosby __________________ Crosby 1978 Chevrolet K10 stepside NH

11-15-2004, 08:02 PM	#3
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	Over 200 views and nobody wants to travel to the southwest for a clean cab? __________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram

11-22-2004, 06:42 PM	#4
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	__________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram

12-06-2004, 07:48 PM	#5
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	__________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram

12-08-2004, 01:01 PM	#6
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	I want it but alas I have no cash. I want to get a cab some day with a floor shift for my 68 project. I even have family that live in Pueblo. Of that family I have an Aunt and Uncle that live right across the street from the fair grounds. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

12-08-2004, 09:00 PM	#7
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Sh!t, to this day I have never seen a cab like that. Every cab in this state has the cab corners, rockers, and half of the damn floor rusted away, and in some cases even a portion of the firewall. I'd love to have a cab like that, I wish it wasn't so far. I probably have more than you're asking invested in patch panels, wire and C02/argon. Last edited by Randy70C-10; 12-08-2004 at 09:03 PM.

12-08-2004, 10:34 PM	#8
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Sent you a PM! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-13-2004, 04:56 PM	#9
jgvallie jgvallie Join Date: Nov 2004 Location: mid-michigan Posts: 106	do you still have it for sale?

12-15-2004, 09:21 PM	#11
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	Sold __________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.