70 K10 stepside with plow for sale in NH - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crosby · 11-15-2004, 02:19 PM

FOR SALE:
I have a 1970 K10 stepside, straight 6 292, four speed with a 7 foot Fisher plow. It is located in Exeter, NH. The cab and fenders are rough, but the frame looks solid to me. It has these really big bumpers that are supposedly factory for service station trucks to push disabled cars around. I was planning on taking those off. It also has the marker lights on the roof of the cab. Pretty original, it came from a family in Rhode Island who had it since new. It has the Fisher plow (7 foot) including all hardware, and the headgear is installed on the truck. I have LOTS of pictures I took today, which I will post at lunch. This would probably be a good parts truck. I don't think the 292 runs, don't have a battery, and booster cables to my Stratus didn't help much.

I also have:

TH350 4x4 tranny out of a mid 80s K10 (unrebuilt)
NP208? transfer case out of a mid 80s K10 (unrebuilt)

Any offers? Pictures of all later. Thank you!

**CUSTOM/10** · 11-15-2004, 03:27 PM

Exeter is only 1/2 hr away, maybe I could stop by and take a look at it.
Let me know.

Gary

crosby · 11-15-2004, 03:32 PM

Hi Gary, that would be fine. Here's my cell number if you or anyone else would like to call. Thank you.

603 969-7028

**CUSTOM/10** · 11-15-2004, 03:43 PM

I'll call you later,

Gary

crosby · 11-15-2004, 03:48 PM

I will post pictures tonight, the cable to connect my camera to the computer is at home... The truck is that fine example you see in my avatar

Thank you

Custom_C5 · 11-15-2004, 04:23 PM

Price, price, price........

crosby · 11-15-2004, 04:36 PM

It all depends on what you want, here's an idea:
truck $500
plow $250
tranny $100
xfer case $100
thank you

arkracing · 11-15-2004, 05:55 PM

How's the stepside bed?
Rotted? rusty? good condition?

crosby · 11-15-2004, 09:05 PM

here are the pictures. please PM me if you'd like me to e-mail more to you. thank you.

crosby · 11-17-2004, 06:08 PM

hello everyone, no interest? if not, I will strip it down and save the frame, if it's worth saving... I am surprised noone is interested in the plow parts, those have got to be hard to find. I guess we've all brought one or two of these home before... ha ha! Thanks, make an offer on anything if you're interested.

crosby · 11-17-2004, 10:57 PM

okay, here we go, now it's time to get serious... how about $250 for the whole lot? That's the truck (rust included), plow and plow frame, pump, etc., a TH350 and a NP208 for $250. Located in NH. I want to focus on my one ton, and replacing my daily driver. Hit a deer last night, that car's junk now (I think). Thanks guys!

1969 GMC · 11-17-2004, 11:32 PM

holy s**t! I'd be on that like white on rice if it was closer, I know people say that alot, but I'd be at your door right now with cash in hand! damn....oh well, with the 292 and the plow, this truck screams "CPNE, please buy me!". :p
Of course, I am sure VTBlazer always has room for another

EDIT: is there anyone coming from New England towards ohio with an empty trailer?

67ChevyC10Stepside · 11-18-2004, 12:08 AM

can i get closer pics of the rust etc?

67ChevyC10Stepside · 11-18-2004, 12:09 AM

wait that's 4wd! let me get my buddy to buy it.

arkracing · 11-18-2004, 01:21 AM

How's the bed other than that Dr.Side Fender??? - Straight sides? are the side rotted at all?

GMC71k20 · 11-18-2004, 02:53 AM

let me see if i can swing it. i could use a new daily driver

crosby · 11-18-2004, 08:05 AM

I will try to take some more pictures today. I am not sure about the bed sides, but I am positive none of that truck is pristine. Where there's smoke....

crosby · 11-18-2004, 08:07 AM

I've been thinking, I would really like to keep the TH350 and NP208 if I can.. those are extras I have in the bed. The original stuff is still installed of course.

**CUSTOM/10** · 11-18-2004, 10:02 AM

I'm going to try and take a look at it this afternoon around 4:30 or so.

Gary

crosby · 11-18-2004, 10:03 AM

Hi Gary, I will be nearby at work if you want to give me a call. The cell is 603 969 7028. Thank you!

**CPNE** · 11-18-2004, 10:06 AM

Hmmm. Okay...does it roll...that is can it be tow dollyed?

any more pics, engine bay and interior? How is the plow frame?

crosby · 11-18-2004, 12:32 PM

hello, I will try to get more pictures at lunch. All of sudden everybody wants it now! When I brought it up here (NH) from Rhode Island, the rear wheels were locked (parking brake? self adjusters frozen?), but then they released... so now I don't know. I wouldn't count on it to be safe. I think the plow frame is pretty solid, I will take as many pictures as I can, post what I think is relevant. Thank you for your interest.

crosby · 11-18-2004, 04:13 PM

more pictures....

crosby · 11-18-2004, 04:15 PM

more pictures...

**CUSTOM/10** · 11-18-2004, 07:19 PM

Crosby You have a PM.

Gary

11-15-2004, 02:19 PM	#1
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	70 K10 stepside with plow for sale in NH FOR SALE: I have a 1970 K10 stepside, straight 6 292, four speed with a 7 foot Fisher plow. It is located in Exeter, NH. The cab and fenders are rough, but the frame looks solid to me. It has these really big bumpers that are supposedly factory for service station trucks to push disabled cars around. I was planning on taking those off. It also has the marker lights on the roof of the cab. Pretty original, it came from a family in Rhode Island who had it since new. It has the Fisher plow (7 foot) including all hardware, and the headgear is installed on the truck. I have LOTS of pictures I took today, which I will post at lunch. This would probably be a good parts truck. I don't think the 292 runs, don't have a battery, and booster cables to my Stratus didn't help much. I also have: TH350 4x4 tranny out of a mid 80s K10 (unrebuilt) NP208? transfer case out of a mid 80s K10 (unrebuilt) Any offers? Pictures of all later. Thank you!

11-15-2004, 03:27 PM	#2
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Truck for sale Exeter is only 1/2 hr away, maybe I could stop by and take a look at it. Let me know. Gary

11-15-2004, 03:43 PM	#4
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Truck I'll call you later, Gary

11-15-2004, 05:55 PM	#8
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	How's the stepside bed? Rotted? rusty? good condition? __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

11-15-2004, 09:05 PM	#9
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	here's the pics... here are the pictures. please PM me if you'd like me to e-mail more to you. thank you. Attached Images

11-15-2004, 03:32 PM	#3
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	Hi Gary, that would be fine. Here's my cell number if you or anyone else would like to call. Thank you. 603 969-7028

11-15-2004, 03:48 PM	#5
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	I will post pictures tonight, the cable to connect my camera to the computer is at home... The truck is that fine example you see in my avatar Thank you

11-15-2004, 04:23 PM	#6
Custom_C5 Registered User Join Date: Jun 2004 Location: ASS-hhh-ville Posts: 94	Price, price, price........

11-15-2004, 04:36 PM	#7
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	It all depends on what you want, here's an idea: truck $500 plow $250 tranny $100 xfer case $100 thank you

11-17-2004, 06:08 PM	#10
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	hello everyone, no interest? if not, I will strip it down and save the frame, if it's worth saving... I am surprised noone is interested in the plow parts, those have got to be hard to find. I guess we've all brought one or two of these home before... ha ha! Thanks, make an offer on anything if you're interested.

11-17-2004, 10:57 PM	#11
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	okay, here we go, now it's time to get serious... how about $250 for the whole lot? That's the truck (rust included), plow and plow frame, pump, etc., a TH350 and a NP208 for $250. Located in NH. I want to focus on my one ton, and replacing my daily driver. Hit a deer last night, that car's junk now (I think). Thanks guys!

11-17-2004, 11:32 PM	#12
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	holy s**t! I'd be on that like white on rice if it was closer, I know people say that alot, but I'd be at your door right now with cash in hand! damn....oh well, with the 292 and the plow, this truck screams "CPNE, please buy me!". :p Of course, I am sure VTBlazer always has room for another EDIT: is there anyone coming from New England towards ohio with an empty trailer? __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

11-18-2004, 12:08 AM	#13
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	can i get closer pics of the rust etc? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

11-18-2004, 12:09 AM	#14
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	wait that's 4wd! let me get my buddy to buy it. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

11-18-2004, 01:21 AM	#15
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	How's the bed other than that Dr.Side Fender??? - Straight sides? are the side rotted at all? __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered



Register or Log In To remove these advertisements.

11-18-2004, 02:53 AM	#16
GMC71k20 Registered User Join Date: Aug 2002 Location: mass Posts: 1,277	let me see if i can swing it. i could use a new daily driver

11-18-2004, 08:05 AM	#17
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	I will try to take some more pictures today. I am not sure about the bed sides, but I am positive none of that truck is pristine. Where there's smoke....

11-18-2004, 08:07 AM	#18
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	I've been thinking, I would really like to keep the TH350 and NP208 if I can.. those are extras I have in the bed. The original stuff is still installed of course.

11-18-2004, 10:02 AM	#19
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Crosby I'm going to try and take a look at it this afternoon around 4:30 or so. Gary

11-18-2004, 10:03 AM	#20
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	Hi Gary, I will be nearby at work if you want to give me a call. The cell is 603 969 7028. Thank you!

11-18-2004, 10:06 AM	#21
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Adam...I'll bite Hmmm. Okay...does it roll...that is can it be tow dollyed? any more pics, engine bay and interior? How is the plow frame? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

11-18-2004, 12:32 PM	#22
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	hello, I will try to get more pictures at lunch. All of sudden everybody wants it now! When I brought it up here (NH) from Rhode Island, the rear wheels were locked (parking brake? self adjusters frozen?), but then they released... so now I don't know. I wouldn't count on it to be safe. I think the plow frame is pretty solid, I will take as many pictures as I can, post what I think is relevant. Thank you for your interest.

11-18-2004, 04:13 PM	#23
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	here's more pictures more pictures.... Attached Images

11-18-2004, 04:15 PM	#24
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	more pictures... more pictures... Attached Images

11-18-2004, 07:19 PM	#25
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Truck Crosby You have a PM. Gary

Register or Log In To remove these advertisements.