WTB-- Wheels from 93-96 sport trucks,454ss, and 350ss trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Shane's Parts · 11-15-2004, 11:06 PM

I've been looking for these particular wheels for almost a year now , with no luck at all finding them. I don't have a pic of them, but they kinda look like old school aluminum slots. However they are actually a chrome steel wheel. Need wheels and center caps for a chevy, not gmc. Any help at all would be greatly appreciated.. Thanks, Shane

f.monroe · 11-16-2004, 01:45 AM

I just happened to be looking for a set of steel wheels for a 95 3/4 ton and remember this ad. Check out this item number on ebay. They should be what you are looking for . Item number: 7933844658

http://cgi.ebay.com/ebaymotors/ws/eB...category=43955

Hope this helps.
Frank

race2c · 11-16-2004, 06:16 PM

To help, i think they also came on some OBS 2wd tahoe and yukons.

Cam

djracer · 11-16-2004, 10:21 PM

I've got a set of those on my suburban and I'll sell them! I want another set of 17 or 18's anyway. Make me an offer.

Shane's Parts · 11-25-2004, 09:14 PM

dj racer , do you have any pics of the wheels you have? Also, they must be 15'' to be the ones I'm looking for. Thanks, shane

djracer · 11-26-2004, 12:44 AM

I can take one tomorrow. they are the ones you are looking for. They need a good bath. 2 of the tires are good and 2 are bad. I have a line on some 17's for my sub so I should be able to turn them loose pretty soon.

djracer · 11-27-2004, 07:34 PM

dirty but they are chrome

99-2door · 11-27-2004, 08:43 PM

http://cgi.ebay.com/ebaymotors/ws/eB...e=STRK:MESE:IT

Shane's Parts · 11-29-2004, 06:54 PM

djracer thats the ones I'm wanting. How much are you wanting for them shipped to 64118? I don't need the tires, as I have new tires to put on them. I need the center caps also. Do the center caps thread onto the lug nuts? If so and you are going to use new lug nuts with youur new wheels, I would like to get them also. Just to save me some time trying to go get them. Thanks, Shane

Shane's Parts · 11-29-2004, 07:01 PM

Thanks for the link 99-2door..

djracer · 11-29-2004, 10:39 PM

I'll have to weigh one and get a freight quote. I'd like to get 250 plus actual freight and we can check around to see who's cheapest on shipping. I can send you cap lugs and wheels.

Let me know what you think

Shane's Parts · 11-30-2004, 02:35 PM

djracer, I don't know what the freight is from your place. However there is a set on e-bay and the freight was 82.50. If I don't end up with the set from e-bay, I will buy the set from you. The e-bay auction ends in about 4 hours, and I don't want to miss out on getting these wheels from either of you. Are you keeping the lug nuts? Let me know if this is a problem on any of this. Thanks, shane

Shane's Parts · 11-30-2004, 02:44 PM

djracer, send me the total price for shipping and everything. consider them sold!!! I will buy your set of wheels if you are still wanting to sell them.. Let me know for sure what you want to do. I'll check the board when I get home. Thanks ,shane

Shane's Parts · 01-10-2005, 11:42 PM

I would like to thank djracer for the wheels. They're in excellent condition, and will work out perfectly on my truck. I haven't installed them yet, however I know they will be perfect. Thanks again for the excellent wheels and speedy delivery. Thanks, Shane

11-15-2004, 11:06 PM	#1
Shane's Parts Registered User Join Date: Jan 2003 Location: Kansas City, Mo Posts: 267	WTB-- Wheels from 93-96 sport trucks,454ss, and 350ss trucks I've been looking for these particular wheels for almost a year now , with no luck at all finding them. I don't have a pic of them, but they kinda look like old school aluminum slots. However they are actually a chrome steel wheel. Need wheels and center caps for a chevy, not gmc. Any help at all would be greatly appreciated.. Thanks, Shane

11-16-2004, 01:45 AM	#2
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	I Think This Is What You Are Looking For I just happened to be looking for a set of steel wheels for a 95 3/4 ton and remember this ad. Check out this item number on ebay. They should be what you are looking for . Item number: 7933844658 http://cgi.ebay.com/ebaymotors/ws/eB...category=43955 Hope this helps. Frank

11-16-2004, 06:16 PM	#3
race2c <--Thanks 86 Red Bowtie Join Date: Aug 2003 Location: Mt. Zion IL (Home) Stillwater, OK (School) Posts: 140	To help, i think they also came on some OBS 2wd tahoe and yukons. Cam __________________ race2c@aol.com 1941 Willys Coupe--Currently being put together. Willy Works fiberglass car. 1969 Chevy K10 SWB--SOLD!!! 1989 Chevy Silverado Z71 RCSB--SOLD!!! 1993 Pontiac Grand Prix--College Commuter

11-16-2004, 10:21 PM	#4
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	I've got a set of those on my suburban and I'll sell them! I want another set of 17 or 18's anyway. Make me an offer. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-26-2004, 12:44 AM	#6
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	I can take one tomorrow. they are the ones you are looking for. They need a good bath. 2 of the tires are good and 2 are bad. I have a line on some 17's for my sub so I should be able to turn them loose pretty soon. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-25-2004, 09:14 PM	#5
Shane's Parts Registered User Join Date: Jan 2003 Location: Kansas City, Mo Posts: 267	dj racer , do you have any pics of the wheels you have? Also, they must be 15'' to be the ones I'm looking for. Thanks, shane

11-27-2004, 07:34 PM	#7
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	dirty but they are chrome Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-27-2004, 08:43 PM	#8
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	http://cgi.ebay.com/ebaymotors/ws/eB...e=STRK:MESE:IT __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

11-29-2004, 06:54 PM	#9
Shane's Parts Registered User Join Date: Jan 2003 Location: Kansas City, Mo Posts: 267	djracer thats the ones I'm wanting. How much are you wanting for them shipped to 64118? I don't need the tires, as I have new tires to put on them. I need the center caps also. Do the center caps thread onto the lug nuts? If so and you are going to use new lug nuts with youur new wheels, I would like to get them also. Just to save me some time trying to go get them. Thanks, Shane

11-29-2004, 07:01 PM	#10
Shane's Parts Registered User Join Date: Jan 2003 Location: Kansas City, Mo Posts: 267	Thanks for the link 99-2door..

11-29-2004, 10:39 PM	#11
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	I'll have to weigh one and get a freight quote. I'd like to get 250 plus actual freight and we can check around to see who's cheapest on shipping. I can send you cap lugs and wheels. Let me know what you think __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-30-2004, 02:35 PM	#12
Shane's Parts Registered User Join Date: Jan 2003 Location: Kansas City, Mo Posts: 267	djracer, I don't know what the freight is from your place. However there is a set on e-bay and the freight was 82.50. If I don't end up with the set from e-bay, I will buy the set from you. The e-bay auction ends in about 4 hours, and I don't want to miss out on getting these wheels from either of you. Are you keeping the lug nuts? Let me know if this is a problem on any of this. Thanks, shane

11-30-2004, 02:44 PM	#13
Shane's Parts Registered User Join Date: Jan 2003 Location: Kansas City, Mo Posts: 267	djracer, send me the total price for shipping and everything. consider them sold!!! I will buy your set of wheels if you are still wanting to sell them.. Let me know for sure what you want to do. I'll check the board when I get home. Thanks ,shane

01-10-2005, 11:42 PM	#14
Shane's Parts Registered User Join Date: Jan 2003 Location: Kansas City, Mo Posts: 267	I would like to thank djracer for the wheels. They're in excellent condition, and will work out perfectly on my truck. I haven't installed them yet, however I know they will be perfect. Thanks again for the excellent wheels and speedy delivery. Thanks, Shane



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.