power str. bracket needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**BIG ORANGE** · 11-18-2004, 08:00 PM

smallblock short pump setup need PS bracket for cheap!!!!

Burnsman · 11-18-2004, 10:07 PM

Are you talking about the bracket that bolts to the front of the block (2 bolts). If so, I have one. $7 shipped. Brian

**BIG ORANGE** · 11-18-2004, 10:36 PM

It has 2 bolt in the front and one that goes back to the engine mount!

Burnsman · 11-18-2004, 11:05 PM

I think it's the one you need. I'll take a pic of it tomorrow. Brian

red71cheyenne · 11-18-2004, 11:13 PM

If he doesn't have it, I have one for a small harmonic balancer setup. Jeff.

**BIG ORANGE** · 11-18-2004, 11:34 PM

Burnsman post pic. Red71 can you post pic and how much to 29720?

red71cheyenne · 11-18-2004, 11:47 PM

I'll post you a pic and get shipping tomorrow evening Big O. Jeff.

67ChevyC10Stepside · 11-19-2004, 01:39 AM

anyone got one to fit this?

**BIG ORANGE** · 11-19-2004, 12:21 PM

I need the type that goes on a factory truck engine not a car engine!

red71cheyenne · 11-19-2004, 06:32 PM

Here's what I got:

Type 1

red71cheyenne · 11-19-2004, 06:35 PM

Type 2

red71cheyenne · 11-19-2004, 06:50 PM

Big O, UPS says that ground is about $10 and 2nd day air is about $20. Jeff.

67ChevyC10Stepside · 11-19-2004, 09:44 PM

it looks like number 2 is what i need

Burnsman · 11-19-2004, 10:42 PM

Here is a pic of the bracket I have. I don't have the other one. Brian

Tx Firefighter · 11-20-2004, 08:50 AM

67C10Stepside, it's really not too cool to horn into some other man's thread trying to buy the parts. You should say "put me second in line if Big Orange doesn't buy it" rather than just butting right into the head of the line.

red71cheyenne · 11-20-2004, 05:32 PM

Big O, let me know if this is what you want and need. I'll take $7 and shipping too.

67 Stepside, there is a part missing from that photo. There is an end cap that goes inboard to bolt it to the block. Don't know if I have it or not. I'll look and if Big O doesn't need it, its yours. Same deal. Jeff.

67ChevyC10Stepside · 11-20-2004, 08:39 PM

i never once said put me first or anything of the sort.......

**BIG ORANGE** · 11-20-2004, 08:43 PM

I think the #1 that 71red has is the one I need! 71 red send me your address with total. Thanks Burnsman for the pic.

red71cheyenne · 11-21-2004, 01:04 AM

I guess I win the dumb@ss award. Number 1 is the one I need for my blazer. The number 2 one is the one I don't need. Sorry to jack you around Big O. Guess I should check myself before I go offering parts. If you think you or 67 can use number 2 let me know. I did find the other part of the bracket too. Goes inside next to the balancer. Jeff.

**BIG ORANGE** · 11-21-2004, 11:51 AM

Hey red71 it's no big deal take care of yourself,I got 2 of these brackets I was just getting one for a local guy who didnt even call or come by when he said he would,so nevermine and your not a dumbbutt,you ment well!
Thanks!!!!!!!!!!!!!

67ChevyC10Stepside · 11-22-2004, 12:24 AM

how much is 2? and does it look like it will fit to you from my pic?

MOTHERTRUCKERS · 11-22-2004, 08:37 AM

Type 1 on the left is a truck p/s pivot bracket for a small block short water pump but none of the others are. The bracket that has the pump adjuster to tighten the belt is almost as big as the pump with an arm that attaches to the motor mount. If my camera worked i'd send a pic of the correct setup.

jamis · 11-22-2004, 09:09 AM

here is a pic, of the one I got form Ed at mothertruckers

67ChevyC10Stepside · 11-22-2004, 12:34 PM

i dont even know what my pump is off of.....i know nothing about these things.

MOTHERTRUCKERS · 11-23-2004, 08:33 AM

Thanks jamis! They are correct short water pump small block p/s brackets for 68-72.

11-18-2004, 10:07 PM	#2
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	bracket Are you talking about the bracket that bolts to the front of the block (2 bolts). If so, I have one. $7 shipped. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

11-18-2004, 10:36 PM	#3
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	It has 2 bolt in the front and one that goes back to the engine mount! __________________ Things happen for a reason!

11-18-2004, 11:05 PM	#4
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	bracket I think it's the one you need. I'll take a pic of it tomorrow. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

11-18-2004, 11:13 PM	#5
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	If he doesn't have it, I have one for a small harmonic balancer setup. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

11-18-2004, 11:34 PM	#6
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	Burnsman post pic. Red71 can you post pic and how much to 29720? __________________ Things happen for a reason!

11-18-2004, 08:00 PM	#1
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	power str. bracket needed smallblock short pump setup need PS bracket for cheap!!!! __________________ Things happen for a reason!

11-18-2004, 11:47 PM	#7
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	I'll post you a pic and get shipping tomorrow evening Big O. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

11-19-2004, 01:39 AM	#8
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	anyone got one to fit this? Attached Images __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

11-19-2004, 12:21 PM	#9
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	I need the type that goes on a factory truck engine not a car engine! __________________ Things happen for a reason!

11-19-2004, 06:32 PM	#10
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Here's what I got: Type 1 __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty Last edited by red71cheyenne; 10-04-2007 at 08:36 PM.

11-19-2004, 06:35 PM	#11
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Type 2 __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty Last edited by red71cheyenne; 10-04-2007 at 08:36 PM.

11-19-2004, 06:50 PM	#12
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Big O, UPS says that ground is about $10 and 2nd day air is about $20. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

11-19-2004, 09:44 PM	#13
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	it looks like number 2 is what i need __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

11-19-2004, 10:42 PM	#14
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	bracket Here is a pic of the bracket I have. I don't have the other one. Brian Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

11-20-2004, 08:50 AM	#15
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	67C10Stepside, it's really not too cool to horn into some other man's thread trying to buy the parts. You should say "put me second in line if Big Orange doesn't buy it" rather than just butting right into the head of the line. __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

11-20-2004, 05:32 PM	#16
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Big O, let me know if this is what you want and need. I'll take $7 and shipping too. 67 Stepside, there is a part missing from that photo. There is an end cap that goes inboard to bolt it to the block. Don't know if I have it or not. I'll look and if Big O doesn't need it, its yours. Same deal. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

11-20-2004, 08:39 PM	#17
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	i never once said put me first or anything of the sort....... __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

11-20-2004, 08:43 PM	#18
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	I think the #1 that 71red has is the one I need! 71 red send me your address with total. Thanks Burnsman for the pic. __________________ Things happen for a reason!

11-21-2004, 01:04 AM	#19
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	I guess I win the dumb@ss award. Number 1 is the one I need for my blazer. The number 2 one is the one I don't need. Sorry to jack you around Big O. Guess I should check myself before I go offering parts. If you think you or 67 can use number 2 let me know. I did find the other part of the bracket too. Goes inside next to the balancer. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

11-21-2004, 11:51 AM	#20
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,767	Hey red71 it's no big deal take care of yourself,I got 2 of these brackets I was just getting one for a local guy who didnt even call or come by when he said he would,so nevermine and your not a dumbbutt,you ment well! Thanks!!!!!!!!!!!!! __________________ Things happen for a reason!

11-22-2004, 12:24 AM	#21
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	how much is 2? and does it look like it will fit to you from my pic? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

11-22-2004, 08:37 AM	#22
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Type 1 on the left is a truck p/s pivot bracket for a small block short water pump but none of the others are. The bracket that has the pump adjuster to tighten the belt is almost as big as the pump with an arm that attaches to the motor mount. If my camera worked i'd send a pic of the correct setup. __________________ Rest in Peace Ed. Thanks for all the good times.

11-22-2004, 09:09 AM	#23
jamis F.A.S.T. president Join Date: Sep 2003 Location: Florida Posts: 1,883	here is a pic, of the one I got form Ed at mothertruckers __________________ F.A.S.T. President and Founder Fabricators for the Advancement of Sawsall Technology "A fear of the Sawsall is a sign of retarded sexual and emotional maturity." ~Sigmund Freud, "General Introduction to Psychoanalysis" Last edited by jamis; 10-05-2007 at 07:11 AM.

11-22-2004, 12:34 PM	#24
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	i dont even know what my pump is off of.....i know nothing about these things. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

11-23-2004, 08:33 AM	#25
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Thanks jamis! They are correct short water pump small block p/s brackets for 68-72. __________________ Rest in Peace Ed. Thanks for all the good times.

Register or Log In To remove these advertisements.