Edelbrock SBC Performer Air Gap Rpm - The 1947 - Present Chevrolet & GMC Truck Message Board Network

86dieselburb · 11-19-2004, 12:50 AM

Looking to trade for a non-egr Performer for SBC. Yes I'm trading down. The Air gap is too tall for my Camaro. Good deal if you've thought about moving up to a Air Gap. I'll pay for the shipping.

ronsk10 · 11-19-2004, 04:27 AM

I have a 2101 performer intake for ya. let me know

DennyB · 11-19-2004, 09:16 AM

If rons dosent work out let me know.
Is yours a square bore or spread bore?
The performer I have is a square bore.
This is just the old performer, not the performer RPM.

grayw0lf · 11-19-2004, 11:24 AM

I have a real clean Performer non-egr for SBC. It is dual bolt pattern (Holley or Q-Jet).

boraxman · 11-19-2004, 05:26 PM

I have a regular Performer RPM thats non-egr (Holley), its on my truck, let me know if interested.

86dieselburb · 11-19-2004, 08:51 PM

Thanks for the reply guys. Ronsk10 was the first to reply. If it dont work out i'll let ya know

SCOTI · 11-20-2004, 02:22 PM

If nothing is finalized, I have a new Perf RPM (not the air-gap) sitting on a shelf in the garage . . .....

gldevall · 11-21-2004, 04:07 PM

I have the Performer EPS if you want to trad for that.

**crossy** · 11-25-2004, 10:17 PM

I have a clean Holley contender 300-38(same as Eddy RPM) I'll trade that $20 and some magic beanstalk beans, DAVE

corn · 11-25-2004, 11:52 PM

Ive got a performer & a performer RPM. Im sure by now you dont even care but I had to get in on the action...corn

bigarmzz · 11-26-2004, 03:37 PM

Quote:

Originally Posted by cornfed63

Ive got a performer & a performer RPM. Im sure by now you dont even care but I had to get in on the action...corn

i'm looking for a performer or rpm intake for the BBC large oval ports...

anyone gots a good one cheap????

-bigarmzz-

11-19-2004, 12:50 AM	#1
86dieselburb Registered User Join Date: Sep 2004 Location: Crestline, CA Posts: 128	Edelbrock SBC Performer Air Gap Rpm Looking to trade for a non-egr Performer for SBC. Yes I'm trading down. The Air gap is too tall for my Camaro. Good deal if you've thought about moving up to a Air Gap. I'll pay for the shipping.

11-19-2004, 09:16 AM	#3
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	If rons dosent work out let me know. Is yours a square bore or spread bore? The performer I have is a square bore. This is just the old performer, not the performer RPM. __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider Last edited by DennyB; 11-19-2004 at 09:19 AM.

11-19-2004, 11:24 AM	#4
grayw0lf Registered User Join Date: Apr 2004 Location: Clanton, AL Posts: 1,253	I have a real clean Performer non-egr for SBC. It is dual bolt pattern (Holley or Q-Jet). __________________ 85' CUCV M1009!!! The newest addition! 6.2diesel, Th400, NP208, & only 36k miles! 70' C-10 LWB Fleetside - Looking good these days! 05' Dodge Neon 88' Winner Escape Sport 1750 - 4.3v6 94' Seadoo SP 84' Honda TRX200, bare nekkid. Just a frame & tires. Always looking for another project or any good deal!

11-19-2004, 05:26 PM	#5
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,920	I have a regular Performer RPM thats non-egr (Holley), its on my truck, let me know if interested. __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

11-19-2004, 08:51 PM	#6
86dieselburb Registered User Join Date: Sep 2004 Location: Crestline, CA Posts: 128	Thanks for the reply guys. Ronsk10 was the first to reply. If it dont work out i'll let ya know Last edited by 86dieselburb; 11-19-2004 at 09:35 PM. Reason: bad grammer

11-19-2004, 04:27 AM	#2
ronsk10 Registered User Join Date: Jun 2003 Location: Scotland Neck NC Posts: 316	I have a 2101 performer intake for ya. let me know

11-20-2004, 02:22 PM	#7
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,132	If nothing is finalized, I have a new Perf RPM (not the air-gap) sitting on a shelf in the garage . . ..... Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

11-21-2004, 04:07 PM	#8
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	I have the Performer EPS if you want to trad for that. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

11-25-2004, 10:17 PM	#9
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,042	I have a clean Holley contender 300-38(same as Eddy RPM) I'll trade that $20 and some magic beanstalk beans, DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww 84,C10 SWB-Yella,stock 86 K10 SWB-Red, hopped up 305,4/S LOTS of Cummins trucks.

11-25-2004, 11:52 PM	#10
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Ive got a performer & a performer RPM. Im sure by now you dont even care but I had to get in on the action...corn



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.