WTB: 73-87 lwb 4x4 rolling frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BIGCHEVYMAN · 11-21-2004, 05:41 PM

need one that is comlpete except for motor. must be located close to tennessee. i have a very straight 87 lwb base and i want to change it to a 4x4. thanks

4bynut · 11-21-2004, 10:29 PM

I have a nice 76 3/4 ton frame in NW IL. Thank's Jason.

BIGCHEVYMAN · 11-21-2004, 10:55 PM

how much? do you have any pics? what kind of axels,and dose it have a trans and t-case?

4bynut · 11-22-2004, 01:47 AM

It has a d44 front and 14bolt rear axle. It doesn't have a trans or tranfer case. I can get pic's tomorrow. And I'm asking $300. What trans and transfer case did you want to run, I might have that also.Thank's Jason.

clarkjw24 · 11-22-2004, 09:20 AM

I've got an 87 lwb 4x4 rolling chassis complete minus motor in SC 29101. $650 with 700r4/NP208, both driveshafts, 10 bolt axles, roller tires, any steering box. I've got a forsale post on here somewhere. I really need to sell this. Possible delievery.

4bynut · 11-22-2004, 04:16 PM

Sorry BIGCHEVYMAN when I went take pic's for you today I found a bad spot in the frame. I didn't notice the spot before and when I replied to your post it was dark out. If you don't find one closer though PM me I may have a friend with one. Sorry and thank's Jason.

BIGCHEVYMAN · 11-22-2004, 08:48 PM

thanks for so honest about that frame jason. hard to find pepole with that trait anymore. if i don't find one closer i will p.m. you. thanks john c.

rich-white · 11-28-2004, 09:36 PM

Big chevy man .. If your not in a hurry I have a 77 3/4 ton 350 auto with tranfer case 8700 GVW new rear springs, new 9.50x16.5 tires, new rear driveshaft, brake lines, rear brakes. I am pulling the motor next week to put in a short bed. Truck runs and pulls like a SOB. If you can wrap a chain around it, it's comin with ya. I have owned the truck since '89 and and luv it, but the bodys gone, doesn't have a/c and i'm getting sick of not having a/c. haven't put a price on...make offer. In St. Louis Missouri

BIGCHEVYMAN · 11-28-2004, 10:20 PM

thats about what i'm looking for. i'm not in any hurry, i'm just trying to round up all my parts before i start on this project. let me know how much your asking for it and we can try to work out a deal. thanks john c.

rich-white · 11-29-2004, 09:09 PM

John make me an offer. I'm still driving the truck this week and going after my other this Saturday. Let me know what your thinking. If your converting you will need a center pan for the shifter of the transfer case. You can have the one thats in the truck. It's in good shape.

BIGCHEVYMAN · 11-30-2004, 06:50 PM

i just hate to price someones stuff.
i may have this truck sold, if its not gone by this weekend i will get in touch with you. a guy asked me what i would take for it and i priced it hi and he said he would take it but i have not seen the money yet.

rich-white · 11-30-2004, 07:38 PM

Let me know. I will have to move once I switch motors out. Let me know if any other parts you might need.

rich-white · 12-03-2004, 10:30 PM

check pm

11-21-2004, 05:41 PM	#1
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	WTB: 73-87 lwb 4x4 rolling frame need one that is comlpete except for motor. must be located close to tennessee. i have a very straight 87 lwb base and i want to change it to a 4x4. thanks

11-21-2004, 10:55 PM	#3
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	? how much? do you have any pics? what kind of axels,and dose it have a trans and t-case?

11-22-2004, 09:20 AM	#5
clarkjw24 I like cheese Join Date: Aug 2004 Location: McBee, SC Posts: 192	I've got an 87 lwb 4x4 rolling chassis complete minus motor in SC 29101. $650 with 700r4/NP208, both driveshafts, 10 bolt axles, roller tires, any steering box. I've got a forsale post on here somewhere. I really need to sell this. Possible delievery. __________________ Cruiser: 1972 K5, 400/TH350/NP205, D44 and 12Bolt, 35 TSLs. Trail rig: 86 K5, 350 TBI, SM465/NP205, 5.13s, 14ff locked, h1 beadlocks, 42" TSLs, 64" rears, 56" fronts, D60 locked, 35pline, drive flanges, crossover, hydro assist, OBA. Tow rig: 2002 F350 PSD CC Dually FX4, chipped, cold air intake, BFGs

11-22-2004, 08:48 PM	#7
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	ok thanks for so honest about that frame jason. hard to find pepole with that trait anymore. if i don't find one closer i will p.m. you. thanks john c.

11-28-2004, 10:20 PM	#9
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	thats it thats about what i'm looking for. i'm not in any hurry, i'm just trying to round up all my parts before i start on this project. let me know how much your asking for it and we can try to work out a deal. thanks john c.

11-21-2004, 10:29 PM	#2
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	I have a nice 76 3/4 ton frame in NW IL. Thank's Jason.

11-22-2004, 01:47 AM	#4
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	It has a d44 front and 14bolt rear axle. It doesn't have a trans or tranfer case. I can get pic's tomorrow. And I'm asking $300. What trans and transfer case did you want to run, I might have that also.Thank's Jason.

11-22-2004, 04:16 PM	#6
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Sorry BIGCHEVYMAN when I went take pic's for you today I found a bad spot in the frame. I didn't notice the spot before and when I replied to your post it was dark out. If you don't find one closer though PM me I may have a friend with one. Sorry and thank's Jason.

11-28-2004, 09:36 PM	#8
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Big chevy man .. If your not in a hurry I have a 77 3/4 ton 350 auto with tranfer case 8700 GVW new rear springs, new 9.50x16.5 tires, new rear driveshaft, brake lines, rear brakes. I am pulling the motor next week to put in a short bed. Truck runs and pulls like a SOB. If you can wrap a chain around it, it's comin with ya. I have owned the truck since '89 and and luv it, but the bodys gone, doesn't have a/c and i'm getting sick of not having a/c. haven't put a price on...make offer. In St. Louis Missouri

11-29-2004, 09:09 PM	#10
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	John make me an offer. I'm still driving the truck this week and going after my other this Saturday. Let me know what your thinking. If your converting you will need a center pan for the shifter of the transfer case. You can have the one thats in the truck. It's in good shape.

11-30-2004, 06:50 PM	#11
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	? i just hate to price someones stuff. i may have this truck sold, if its not gone by this weekend i will get in touch with you. a guy asked me what i would take for it and i priced it hi and he said he would take it but i have not seen the money yet.

11-30-2004, 07:38 PM	#12
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Let me know. I will have to move once I switch motors out. Let me know if any other parts you might need.

12-03-2004, 10:30 PM	#13
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	check pm



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.