Front suspension components! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BaggedC10 · 11-25-2004, 01:30 AM

Brand-new 1987 16-gallon replacement fuel tanks (Purchased from Classic Industries). Powdercoated sparkle silver. $175 shipped for both.

* These should fit all 73-87' SWB trucks. I am told the only difference between 86' and 87' tanks is a sump at the bottom.

Fuel tank brackets (4). Powdercoated sparkle silver. $125 shipped OBO.

Plastic fuel tank covers lined w/ Line-X inside and out. $75 shipped OBO.

GM sending units, fuel pumps, and strainers. Installed but never operated. $350 shipped OBO for both sides!

GM frame mounted fuel switch valve. Installed but never operated. *Make an offer because I don't remember how much I paid for it!*

$500 takes everything shipped to your door.

*Updated 12/01*

eagle23 · 11-25-2004, 10:57 AM

Couple questions:
-Are all the suspension parts (the first batch, A-arms, ball joints, etc.) sparkle-coated, or just some?
-Any idea of shipping to 30076?

Thanks...and Happy Thanksgiving!

Brian

BaggedC10 · 11-25-2004, 12:06 PM

Quote:

Originally Posted by eagle23

Couple questions:
-Are all the suspension parts (the first batch, A-arms, ball joints, etc.) sparkle-coated, or just some?
-Any idea of shipping to 30076?

Thanks...and Happy Thanksgiving!

Brian

I had the control arms, cross shafts, and washers powdercoated before assembling everything. They look great!

Shipping won't be cheap but I'm asking $250 shipped to your door.

BTW, I will post pictures of everything I have for sale Tuesday morning.

ocbaud · 11-25-2004, 08:52 PM

i want the a arms and expecially the swaybar

BaggedC10 · 11-25-2004, 09:41 PM

Quote:

Originally Posted by ocbaud

i want the a arms and expecially the swaybar

Shoot me a PM if your serious.

BaggedC10 · 11-25-2004, 11:07 PM

*Edit*

ocbaud · 11-25-2004, 11:26 PM

Quote:

Originally Posted by BaggedC10

Shoot me a PM if your serious.

sorry

i just saw how that came out.

i mean i WANT them. not i can AFFORD them or have the money to spend on them

BaggedC10 · 11-25-2004, 11:27 PM

No problem.

BTW, I'm flexible on these prices, so buy all this stuff.....someone!

ocbaud · 11-25-2004, 11:51 PM

thats the exact anti-sway bar i want. but after ordering my rearend parts last night, i've got exactly $150.67 in my checking account and only a little bit of cash

BaggedC10 · 11-26-2004, 01:33 AM

Just to clarify.....

I'm selling the complete ART Cool-Ride kit, minus shock absorbers and steering stops for $175! This includes two 90* PTC fittings and hardware. The kit retails through ART for $524 + tax/shipping.

eagle23 · 11-26-2004, 01:42 PM

I'm interested, esp in seeing the pix.

I PM'd you.

Brian

BaggedC10 · 11-26-2004, 02:16 PM

Here is the color.

Sorry, about the small pictures.

The metallic or sparkle is only noticeable when in direct sunlight.

BaggedC10 · 11-27-2004, 01:01 PM

TTT

TIMSPEED · 11-27-2004, 07:28 PM

Hmm...bags are getting mighty tempting...

BaggedC10 · 11-27-2004, 08:56 PM

Quote:

Originally Posted by TIMSPEED

Hmm...bags are getting mighty tempting...

Especially, for $175.

I'll even install the front kit if you drive up here, Tim.

C&C Chevy · 11-28-2004, 12:10 AM

Quote:

Originally Posted by BaggedC10

GM frame mounted fuel switch valve. Installed but never operated. *Make an offer because I don't remember how much I paid for it!*

This is for a TBI engine?

cochino12 · 11-28-2004, 02:28 AM

Quote:

Originally Posted by BaggedC10

Just to clarify.....

I'm selling the complete ART Cool-Ride kit, minus shock absorbers and steering stops for $175! This includes two 90* PTC fittings and hardware. The kit retails through ART for $524 + tax/shipping.

Crap! Someone buy this stuff before I do. I really dont need the wife yelling at me for spending money on this before the holidays.

eagle23 · 11-28-2004, 08:25 PM

I hate to say it, but the xmas budget just doesn't allow right now. I've tried to maneuver around it, and maybe I will eventually

, but I have to pass for now.

Brian

BaggedC10 · 11-28-2004, 10:01 PM

No problem, Brian.

ocbaud · 11-28-2004, 10:34 PM

what exactly else would i need to buy to make the ART front kit work??

how much would a compressor and tank be?

BaggedC10 · 11-29-2004, 12:20 AM

Quote:

Originally Posted by ocbaud

what exactly else would i need to buy to make the ART front kit work??

how much would a compressor and tank be?

You could run the front of a schrader valve until you have money for a compressor system. I would recommend a 5-gallon air tank, Viar 400 compressor, (4) SMC 1/2" valves, and of course 1/2" air line. This would be an awesome setup to add-on to if/when you bag' the back. It also depends on how quick you want your system to be.

The only thing you will NEED is shock absorbers. ART supplies Monroe shock absorbers standard but I don't have those anymore.

ocbaud · 11-29-2004, 12:31 AM

so, if i were to say, buy that from you. what would i need to buy/do to get it all installed??

what if i just wanted to change the ride height when i was at home with a compressor i have in my garage?? is that what the schrader valve does??

BaggedC10 · 11-29-2004, 01:07 AM

Quote:

Originally Posted by ocbaud

so, if i were to say, buy that from you. what would i need to buy/do to get it all installed??

what if i just wanted to change the ride height when i was at home with a compressor i have in my garage?? is that what the schrader valve does??

Drill 4-holes in the front X-member, a 1" hole on the backside of the X-member to route the air line through (Don't forget a rubber gourmet), and install a schrader valve. Repeat on the other side.

This would give you independent control of the air springs. You could run the air line outboard of the frame rail, along the cab mount/floor pan support, and to the rocker panel (Picture it routed in an "L" shape w/ the top of the "L" being the front X-member). Secure the air line to the frame 8-10" behind the front X-member and to the cab floor support using (2) insulated clamps and you would be set!

BTW, check out the following link.

http://207.44.196.117/vboard/showthread.php3?t=129463

BaggedC10 · 11-29-2004, 01:09 AM

Quote:

Originally Posted by ocbaud

what if i just wanted to change the ride height when i was at home with a compressor i have in my garage?? is that what the schrader valve does??

Yes, you could inflate the bags at home or at a gas station.

ocbaud · 11-29-2004, 01:12 AM

so i would need an air tank for it?

11-25-2004, 01:30 AM	#1
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	Front suspension components! Brand-new 1987 16-gallon replacement fuel tanks (Purchased from Classic Industries). Powdercoated sparkle silver. $175 shipped for both. * These should fit all 73-87' SWB trucks. I am told the only difference between 86' and 87' tanks is a sump at the bottom. Fuel tank brackets (4). Powdercoated sparkle silver. $125 shipped OBO. Plastic fuel tank covers lined w/ Line-X inside and out. $75 shipped OBO. GM sending units, fuel pumps, and strainers. Installed but never operated. $350 shipped OBO for both sides! GM frame mounted fuel switch valve. Installed but never operated. Make an offer because I don't remember how much I paid for it! $500 takes everything shipped to your door. Updated 12/01 __________________ 2001 Silverado bagged on 22's. Sold Last edited by BaggedC10; 12-01-2004 at 02:53 PM.

11-25-2004, 11:07 PM	#6
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	Edit __________________ 2001 Silverado bagged on 22's. Sold Last edited by BaggedC10; 12-01-2004 at 01:28 AM.

11-25-2004, 11:27 PM	#8
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	No problem. BTW, I'm flexible on these prices, so buy all this stuff.....someone! __________________ 2001 Silverado bagged on 22's. Sold

11-26-2004, 01:33 AM	#10
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	Just to clarify..... I'm selling the complete ART Cool-Ride kit, minus shock absorbers and steering stops for $175! This includes two 90* PTC fittings and hardware. The kit retails through ART for $524 + tax/shipping. __________________ 2001 Silverado bagged on 22's. Sold

11-26-2004, 02:16 PM	#12
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	Here is the color. Sorry, about the small pictures. The metallic or sparkle is only noticeable when in direct sunlight. Attached Images __________________ 2001 Silverado bagged on 22's. Sold

11-25-2004, 10:57 AM	#2
eagle23 Active Member Join Date: Feb 2004 Location: Atlanta GA Posts: 174	Couple questions: -Are all the suspension parts (the first batch, A-arms, ball joints, etc.) sparkle-coated, or just some? -Any idea of shipping to 30076? Thanks...and Happy Thanksgiving! Brian

11-25-2004, 08:52 PM	#4
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i want the a arms and expecially the swaybar

11-25-2004, 11:51 PM	#9
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	thats the exact anti-sway bar i want. but after ordering my rearend parts last night, i've got exactly $150.67 in my checking account and only a little bit of cash

11-26-2004, 01:42 PM	#11
eagle23 Active Member Join Date: Feb 2004 Location: Atlanta GA Posts: 174	I'm interested, esp in seeing the pix. I PM'd you. Brian

11-27-2004, 01:01 PM	#13
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	TTT __________________ 2001 Silverado bagged on 22's. Sold

11-27-2004, 07:28 PM	#14
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Hmm...bags are getting mighty tempting... __________________ I have a few cars... See Them Here

11-28-2004, 08:25 PM	#18
eagle23 Active Member Join Date: Feb 2004 Location: Atlanta GA Posts: 174	I hate to say it, but the xmas budget just doesn't allow right now. I've tried to maneuver around it, and maybe I will eventually , but I have to pass for now. Brian

11-28-2004, 10:01 PM	#19
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	No problem, Brian. __________________ 2001 Silverado bagged on 22's. Sold

11-28-2004, 10:34 PM	#20
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	what exactly else would i need to buy to make the ART front kit work?? how much would a compressor and tank be?

11-29-2004, 12:31 AM	#22
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	so, if i were to say, buy that from you. what would i need to buy/do to get it all installed?? what if i just wanted to change the ride height when i was at home with a compressor i have in my garage?? is that what the schrader valve does??



Register or Log In To remove these advertisements.

11-29-2004, 01:12 AM	#25
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	so i would need an air tank for it?

Register or Log In To remove these advertisements.