WTB: SWB step bed sides and steps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FirstGen · 11-30-2004, 01:25 AM

DFW area would be great.

RON WOODGEARD · 11-30-2004, 03:42 AM

Quote:

Originally Posted by FirstGen

DFW area would be great. Looking for short step bed sides and steps. Don't need fenders or gate. Gonna hack down the long step so almost everything will cross over... Would buy a complete bed if the price is good enough.

What do you guys have?

Thanks,
Taylor
214-317-6373

I have some of everything you need or want,, GO HERE Click on a picture to see a larger view... If you see something you're interested in, Let me know..

Woodgeard@earthlink.net

Kas68c10 · 11-30-2004, 11:01 AM

I think there is a whole bed, no wood on ebay, it didn't meet reserve so you could contact the owner....

billsbowtie · 11-30-2004, 12:52 PM

i have these nice steps for $50.00 plus shipping and i have some useable bed sides for $100.00 but i cant ship the bed sides thanks bill

billsbowtie · 11-30-2004, 12:53 PM

Kas68c10 · 11-30-2004, 01:00 PM

I have some bedsides, but not great shape, all there, but worn,and you are along ways for shipping. I will get some pics, but cant for a week or so. If you are still looking then, pm me and I will get pics and will give you a good deal.

FirstGen · 11-30-2004, 02:06 PM

Thanks for all the replys guys. I think shipping just really kills the deal most of the time.

Kas68C10, do you have the link to the ebay auction?

Billsbowtie, how much is shipping on those steps? 75044 Garland, TX.

Thanks!

Kas68c10 · 11-30-2004, 03:19 PM

+I cant find it and I cant search expired listings on ebay, but I thijnk I saw the links on the parts board

billsbowtie · 11-30-2004, 09:31 PM

fristgen shipping is $25.00 thanks bill

Kat · 11-30-2004, 09:41 PM

As a suggestion,if you can not find the parts(readily),cut down your current steps/sides.

FirstGen · 11-30-2004, 10:53 PM

Kat,

Yeah I thought about that but I'm not sure exactly where to take out the material and how much. I know I would need to take some off the backside of the fender and some off the front side. Any idea?

SCOTI · 12-01-2004, 12:53 AM

FirstGen, if you don't find anything, it shouldn't be too difficult to figure out where to make the cuts on your current bed.

You should be able to center the current fenders over the rear wheels & reverse engineer from there to get an idea of where the cuts need to occur.

FirstGen · 12-01-2004, 07:16 PM

any more guys?

Kat · 12-02-2004, 01:31 AM

On the how to question,that would be a good one for message board.(Sorry no personal experience)One way would be to measure a short bedside.I just happened to remember,think a friend has some short bedsides.Will check on them/steps(Tulsa)

FirstGen · 12-02-2004, 02:14 AM

Kat - see if you can find out ASAP. I either need to buy a set cheap or cut down these sometime this week to get this rolling.
LMK.

PTS Kustoms · 12-02-2004, 02:49 AM

Hello!

I have a complete stepside bed for 67-72 SWB. The wood is gone but the hardware is there. The bed is rust free and very straight as well. I recently bought a right front step to go with it and also a used tailgate whish is also rust free and straight. The only drawback is the left fender is for a spare tire.

I am asking $350.00.

Bed is located in Roswell, N.M. which is 8 hours from Ft Worth.

Thanks,

Perry

Kat · 12-02-2004, 04:23 PM

My friend does have a set of bedsides.Wants $150,having him check condition/for steps. Tulsa is about 5 hours fom Dallas.If anyones's interested also has a set of long stepside bedsides $100.

FirstGen · 12-02-2004, 07:56 PM

Kat, Very interested. Is there a number I can call him at? I found another guy that has a set of steps and sides for $175 about 2 hours from here. He just doesn't seem to be on top of things and I don't know when I would be able to get them from him...

Kat · 12-02-2004, 11:24 PM

His name is Mike @918-258-1486.Has one step +bedsides=$125,call and he will give you run down on condition etc.

FirstGen · 12-03-2004, 01:04 AM

Thanks Kat. I called him. If he wasn't missing one step it would be more inticing. Even still if this other guy doesn't come through tomorrow maybe we can still work something else at.

Anyone else got something, maybe closer???

Thanks for all the responces.

FirstGen · 12-04-2004, 06:13 PM

Still looking for other options. Anyone else?

FirstGen · 12-07-2004, 05:26 AM

last call before I drive 5 hours to pick up those bed sides from Mike. Anyone have these in DFW???

Thanks for all the responces.

NO LONGER DISTURBED KONCEPTZ · 12-07-2004, 08:20 PM

Im in Fort Worth and my friend has a short bed step box from a 74 truck that would work. He only wants 200 for the whole bed.

FirstGen · 12-08-2004, 12:27 AM

Thanks for the reference Kat. Picked up those bedsides tonight. Would have come by to check out your stash of stuff but I was running late and didn't get to Tulsa till almost 7...
Thanks again.

11-30-2004, 01:25 AM	#1
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	WTB: SWB step bed sides and steps DFW area would be great. __________________ 1968 C10 build in process TT LSA/6L90e/9" Last edited by FirstGen; 06-11-2013 at 03:56 PM.

11-30-2004, 11:01 AM	#3
Kas68c10 Registered User Join Date: Apr 2000 Location: Freeland,Michigan,USA Posts: 312	I think there is a whole bed, no wood on ebay, it didn't meet reserve so you could contact the owner.... __________________ 1968 SWB Stepside, 250,pwr disc brake and tilt pwr steering, 5 spd tranny, HEI,Accel coil,K&N filter,Seat from a later truck with built in seatbelts, front and rear sway bars, moved gas tank to under the bed, headman hedders, new chrome bumpers,one wire alternator,Weber k550cub carburator...WORK IN PROGRESS, Freeland MI , Just bought a 72 Jimmy!!!!!!!!!!!

11-30-2004, 01:00 PM	#6
Kas68c10 Registered User Join Date: Apr 2000 Location: Freeland,Michigan,USA Posts: 312	I have some bedsides, but not great shape, all there, but worn,and you are along ways for shipping. I will get some pics, but cant for a week or so. If you are still looking then, pm me and I will get pics and will give you a good deal. __________________ 1968 SWB Stepside, 250,pwr disc brake and tilt pwr steering, 5 spd tranny, HEI,Accel coil,K&N filter,Seat from a later truck with built in seatbelts, front and rear sway bars, moved gas tank to under the bed, headman hedders, new chrome bumpers,one wire alternator,Weber k550cub carburator...WORK IN PROGRESS, Freeland MI , Just bought a 72 Jimmy!!!!!!!!!!!

11-30-2004, 02:06 PM	#7
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Thanks for all the replys guys. I think shipping just really kills the deal most of the time. Kas68C10, do you have the link to the ebay auction? Billsbowtie, how much is shipping on those steps? 75044 Garland, TX. Thanks! __________________ 1968 C10 build in process TT LSA/6L90e/9"

11-30-2004, 03:19 PM	#8
Kas68c10 Registered User Join Date: Apr 2000 Location: Freeland,Michigan,USA Posts: 312	+I cant find it and I cant search expired listings on ebay, but I thijnk I saw the links on the parts board __________________ 1968 SWB Stepside, 250,pwr disc brake and tilt pwr steering, 5 spd tranny, HEI,Accel coil,K&N filter,Seat from a later truck with built in seatbelts, front and rear sway bars, moved gas tank to under the bed, headman hedders, new chrome bumpers,one wire alternator,Weber k550cub carburator...WORK IN PROGRESS, Freeland MI , Just bought a 72 Jimmy!!!!!!!!!!!

11-30-2004, 12:52 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i have these nice steps for $50.00 plus shipping and i have some useable bed sides for $100.00 but i cant ship the bed sides thanks bill

11-30-2004, 12:53 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997

11-30-2004, 09:31 PM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	fristgen shipping is $25.00 thanks bill

11-30-2004, 09:41 PM	#10
Kat Registered User Join Date: Oct 2004 Location: Sapulpa,OK. Posts: 77	As a suggestion,if you can not find the parts(readily),cut down your current steps/sides.

11-30-2004, 10:53 PM	#11
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Kat, Yeah I thought about that but I'm not sure exactly where to take out the material and how much. I know I would need to take some off the backside of the fender and some off the front side. Any idea? __________________ 1968 C10 build in process TT LSA/6L90e/9"

12-01-2004, 12:53 AM	#12
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,943	FirstGen, if you don't find anything, it shouldn't be too difficult to figure out where to make the cuts on your current bed. You should be able to center the current fenders over the rear wheels & reverse engineer from there to get an idea of where the cuts need to occur. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-01-2004, 07:16 PM	#13
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	any more guys? __________________ 1968 C10 build in process TT LSA/6L90e/9"

12-02-2004, 01:31 AM	#14
Kat Registered User Join Date: Oct 2004 Location: Sapulpa,OK. Posts: 77	Doh! On the how to question,that would be a good one for message board.(Sorry no personal experience)One way would be to measure a short bedside.I just happened to remember,think a friend has some short bedsides.Will check on them/steps(Tulsa)

12-02-2004, 02:14 AM	#15
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Kat - see if you can find out ASAP. I either need to buy a set cheap or cut down these sometime this week to get this rolling. LMK. __________________ 1968 C10 build in process TT LSA/6L90e/9"

12-02-2004, 02:49 AM	#16
PTS Kustoms Registered User Join Date: Feb 2004 Location: Roswell, N.M. Posts: 210	Hello! I have a complete stepside bed for 67-72 SWB. The wood is gone but the hardware is there. The bed is rust free and very straight as well. I recently bought a right front step to go with it and also a used tailgate whish is also rust free and straight. The only drawback is the left fender is for a spare tire. I am asking $350.00. Bed is located in Roswell, N.M. which is 8 hours from Ft Worth. Thanks, Perry



Register or Log In To remove these advertisements.

12-02-2004, 04:23 PM	#17
Kat Registered User Join Date: Oct 2004 Location: Sapulpa,OK. Posts: 77	My friend does have a set of bedsides.Wants $150,having him check condition/for steps. Tulsa is about 5 hours fom Dallas.If anyones's interested also has a set of long stepside bedsides $100.

12-02-2004, 07:56 PM	#18
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Kat, Very interested. Is there a number I can call him at? I found another guy that has a set of steps and sides for $175 about 2 hours from here. He just doesn't seem to be on top of things and I don't know when I would be able to get them from him... __________________ 1968 C10 build in process TT LSA/6L90e/9"

12-02-2004, 11:24 PM	#19
Kat Registered User Join Date: Oct 2004 Location: Sapulpa,OK. Posts: 77	His name is Mike @918-258-1486.Has one step +bedsides=$125,call and he will give you run down on condition etc.

12-03-2004, 01:04 AM	#20
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Thanks Kat. I called him. If he wasn't missing one step it would be more inticing. Even still if this other guy doesn't come through tomorrow maybe we can still work something else at. Anyone else got something, maybe closer??? Thanks for all the responces. __________________ 1968 C10 build in process TT LSA/6L90e/9"

12-04-2004, 06:13 PM	#21
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Still looking for other options. Anyone else? __________________ 1968 C10 build in process TT LSA/6L90e/9"

12-07-2004, 05:26 AM	#22
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	last call before I drive 5 hours to pick up those bed sides from Mike. Anyone have these in DFW??? Thanks for all the responces. __________________ 1968 C10 build in process TT LSA/6L90e/9"

12-07-2004, 08:20 PM	#23
NO LONGER DISTURBED KONCEPTZ Registered User Join Date: Aug 2004 Posts: 257	Im in Fort Worth and my friend has a short bed step box from a 74 truck that would work. He only wants 200 for the whole bed.

12-08-2004, 12:27 AM	#24
FirstGen Just Don't Stop! Join Date: Feb 2004 Location: Dallas Posts: 1,239	Thanks for the reference Kat. Picked up those bedsides tonight. Would have come by to check out your stash of stuff but I was running late and didn't get to Tulsa till almost 7... Thanks again. __________________ 1968 C10 build in process TT LSA/6L90e/9"

Register or Log In To remove these advertisements.