71 Blazer 4x4 project For Sale....$600 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brotherbud · 11-30-2004, 09:12 PM

1971 Blazer 4x4 w/GMC slope nose front clip. No motor/tranny/trnsfr case. Pretty complete otherwise. Body is in pretty good shape. Broke my leg and can't finish this. I can send you pics via email if you want. I am in the Lake Stevens - Granite Falls area. Contact me at smailmail@earthlink.net First $600 cash buys it.

tim_and_bobbi_blazer · 11-30-2004, 10:44 PM

I don't know where either of those places are. Could you give me a little help on where you are located.

Thank you

Bobbi

**too much stuff** · 11-30-2004, 10:52 PM

Could you post some pics on the board? May be interested depending on location.

teamharvey · 11-30-2004, 11:14 PM

I am pretty sure it is near Everette Wa, about 45 mins. north of Seattle.

72Bob · 12-01-2004, 12:18 AM

Email sent.

sganje · 12-01-2004, 08:56 PM

email sent

mastercraftkpk · 12-02-2004, 12:22 PM

Granite Falls is real close to me. I am in Houston, as indicated in the upper right corner. I'll give you $1000 cash for it. When can I come pick it up?

However, if you are not in the great state of TEXAS (where we are not so closed minded to think that we have a monopoly on city names here)......thanks for being so vague. My offer is recinded.

donkey69 · 12-02-2004, 09:45 PM

Thanks for the pics Brotherbud! Too far away for me!!

donkey69 · 12-02-2004, 09:46 PM

one more.............

bouncytruck · 12-03-2004, 02:12 AM

Lake Stevens/Granite Falls is definately in Washington State just east of Everett. I bought my first K5 in Granite Falls.

Some message boards don't permit posting items for sale until you have reach a minimum # of posts. Might be something to consider, but we may also lose out on some good deals.

LUV2XCLR8 · 12-03-2004, 04:38 PM

PIC #1 - FRONT FENDER LOOKS LIKE A 69-72

PIC #2 - FRONT FENDER LOOKS LIKE A 67-68

IT'S MY EYES OR THE PHOTO ANGLE, NOT SURE
WHICH, BUT THE GRILL IS IN IT, SO WHO KNOWS

6772king · 12-03-2004, 05:31 PM

the drivers is a 69-72 chevy fender,,, the pass is a 68 chevy or 68-72 gmc,,,gmc used the 68 chev fender for the $$$ looks like a damn good deal!!! wish I was closer!!!

bad_turbo · 12-04-2004, 12:57 AM

alot of pretty colors on the interior and under the hood!

obsesive23 · 12-04-2004, 02:20 AM

This is the same one I posted about a month ago. He did want $900. It's worth it guys, The quarters are in good shape, but will need front floor pan. Great parts rig.

71jimmy · 12-04-2004, 02:39 AM

OK, I give up. What is the difference between the two front fenders?

crazy4chevs · 12-08-2004, 05:17 PM

Is it still available? If so can you p/m me and let me know of times that are good for you to look at it. and possibly buy it etc. my brother in law is looking for one. and i need to get with him to make the call. Thanks

LUV2XCLR8 · 12-08-2004, 05:26 PM

Quote:

Originally Posted by 71jimmy

OK, I give up. What is the difference between the two front fenders?

67-68 THE GRILL IS SEPERATE FROM THE FENDERS ( PASSENGER )

69-72 THE GRILL FITS OVER THE EDGE OF FENDERS ( DRIVER'S )

chevyal71 · 12-08-2004, 05:53 PM

67's & 8's don't have sidemarkers do they?

LUV2XCLR8 · 12-08-2004, 05:57 PM

Quote:

Originally Posted by chevyal71

67's & 8's don't have sidemarkers do they?

67'S NO

68'S YES

brotherbud · 12-09-2004, 07:36 PM

My apologies to all (even mastercraftkpk in Texas...wherever that is) for the confusion on my location. I am in Washington State, approx 45mins North of Seattle, 15mins N/E of Everett as 'teamharvey' correctly concluded. Just did some time in the hospital and was unable to respond up to now. I am now at home and as of 12/09, this rig is still available. Both front fenders are original 71 fenders. You just can't see the lip in the pics very good on the pass fender. Appreciate all the interest and help! I'll keep an eye on the board now & you can also email me at smailmail@earthlink.net. thx, Bud

bad_turbo · 12-11-2004, 02:30 PM

wish I could afford to finish it!

chevyal71 · 12-11-2004, 02:38 PM

Wish I could afford to go that far to get it!

crazy4chevs · 12-15-2004, 02:48 PM

brother bud,
my brother in law is still himhawing around, so if anyone else wants to step up nows your chance.

another TTT for ya.

11-30-2004, 10:52 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,716	Could you post some pics on the board? May be interested depending on location. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-30-2004, 11:14 PM	#4
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 579	I am pretty sure it is near Everette Wa, about 45 mins. north of Seattle. __________________ 71 Custom 20 Deluxe..soon to be SWB 1/2 ton 1 incredible wife 2 great kids

12-01-2004, 12:18 AM	#5
72Bob Registered User Join Date: Sep 2002 Location: Burlington, WA Posts: 298	Email sent. __________________ 1971 GMC Sierra 3/4 Ton 4x4 1972 Chevrolet SWB 4x4 RIP LeRoy

12-02-2004, 09:45 PM	#8
donkey69 JB-80 &quot;Twice as Good&quot; Join Date: Jun 2004 Location: Central, MN Posts: 354	thanks for the pics Thanks for the pics Brotherbud! Too far away for me!! Attached Images __________________ HEY NOW!

12-02-2004, 09:46 PM	#9
donkey69 JB-80 &quot;Twice as Good&quot; Join Date: Jun 2004 Location: Central, MN Posts: 354	one more............. Attached Images __________________ HEY NOW!

11-30-2004, 09:12 PM	#1
brotherbud Registered User Join Date: Nov 2004 Posts: 2	71 Blazer 4x4 project For Sale....$600 1971 Blazer 4x4 w/GMC slope nose front clip. No motor/tranny/trnsfr case. Pretty complete otherwise. Body is in pretty good shape. Broke my leg and can't finish this. I can send you pics via email if you want. I am in the Lake Stevens - Granite Falls area. Contact me at smailmail@earthlink.net First $600 cash buys it.

11-30-2004, 10:44 PM	#2
tim_and_bobbi_blazer Registered User Join Date: Oct 2004 Location: Texas Posts: 105	location?? I don't know where either of those places are. Could you give me a little help on where you are located. Thank you Bobbi

12-01-2004, 08:56 PM	#6
sganje Registered User Join Date: Sep 2004 Location: Colorado Posts: 47	email sent

12-02-2004, 12:22 PM	#7
mastercraftkpk Registered User Join Date: Nov 2003 Location: houston,tx Posts: 334	Granite Falls is real close to me. I am in Houston, as indicated in the upper right corner. I'll give you $1000 cash for it. When can I come pick it up? However, if you are not in the great state of TEXAS (where we are not so closed minded to think that we have a monopoly on city names here)......thanks for being so vague. My offer is recinded.

12-03-2004, 02:12 AM	#10
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Lake Stevens/Granite Falls is definately in Washington State just east of Everett. I bought my first K5 in Granite Falls. Some message boards don't permit posting items for sale until you have reach a minimum # of posts. Might be something to consider, but we may also lose out on some good deals. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L Last edited by bouncytruck; 12-03-2004 at 02:15 AM.

12-03-2004, 04:38 PM	#11
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	My Eyes Are Going Bad PIC #1 - FRONT FENDER LOOKS LIKE A 69-72 PIC #2 - FRONT FENDER LOOKS LIKE A 67-68 IT'S MY EYES OR THE PHOTO ANGLE, NOT SURE WHICH, BUT THE GRILL IS IN IT, SO WHO KNOWS __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

12-03-2004, 05:31 PM	#12
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	the drivers is a 69-72 chevy fender,,, the pass is a 68 chevy or 68-72 gmc,,,gmc used the 68 chev fender for the $$$ looks like a damn good deal!!! wish I was closer!!! __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!

12-04-2004, 12:57 AM	#13
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	alot of pretty colors on the interior and under the hood! __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

12-04-2004, 02:20 AM	#14
obsesive23 Who me? Join Date: Jun 2004 Location: Bothell WA Posts: 640	This is the same one I posted about a month ago. He did want $900. It's worth it guys, The quarters are in good shape, but will need front floor pan. Great parts rig. __________________ Living the dream 72 2WD Blazer, under going porter built surgery 67 GT Mustang fastback 67 Mustang coupe C/S clone 64 Falcon sprint hardtop

12-04-2004, 02:39 AM	#15
71jimmy Registered User Join Date: Mar 2004 Location: Sacramento, CA Posts: 1,084	OK, I give up. What is the difference between the two front fenders? __________________ '71 Jimmy, 350, SM465, NP205, 2in Tuff Country lift, 33s on rallies, TBI, softtop and hardtop "If life was fair you'd be able to afford one of each and a garage large enough to house them all."



Register or Log In To remove these advertisements.

12-08-2004, 05:17 PM	#16
crazy4chevs Registered User Join Date: Oct 2002 Location: Des Moines WA. (Kent, area) Posts: 668	Is it still available? If so can you p/m me and let me know of times that are good for you to look at it. and possibly buy it etc. my brother in law is looking for one. and i need to get with him to make the call. Thanks __________________ 70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington .

12-08-2004, 05:53 PM	#18
chevyal71 Registered User Join Date: Feb 2003 Location: central ny Posts: 44	67's & 8's don't have sidemarkers do they?

12-09-2004, 07:36 PM	#20
brotherbud Registered User Join Date: Nov 2004 Posts: 2	My apologies to all (even mastercraftkpk in Texas...wherever that is) for the confusion on my location. I am in Washington State, approx 45mins North of Seattle, 15mins N/E of Everett as 'teamharvey' correctly concluded. Just did some time in the hospital and was unable to respond up to now. I am now at home and as of 12/09, this rig is still available. Both front fenders are original 71 fenders. You just can't see the lip in the pics very good on the pass fender. Appreciate all the interest and help! I'll keep an eye on the board now & you can also email me at smailmail@earthlink.net. thx, Bud

12-11-2004, 02:30 PM	#21
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	wish I could afford to finish it! __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

12-11-2004, 02:38 PM	#22
chevyal71 Registered User Join Date: Feb 2003 Location: central ny Posts: 44	Wish I could afford to go that far to get it!

12-15-2004, 02:48 PM	#23
crazy4chevs Registered User Join Date: Oct 2002 Location: Des Moines WA. (Kent, area) Posts: 668	brother bud, my brother in law is still himhawing around, so if anyone else wants to step up nows your chance. another TTT for ya. __________________ 70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington . Last edited by crazy4chevs; 12-15-2004 at 02:51 PM.

Register or Log In To remove these advertisements.