Bolt on mirrors for '69 sub - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bubsco · 12-01-2004, 10:36 PM

I am looking for some knowledge on sport mirrors to replace the stock mirrors on a '69 suburban. I have seen a few in pictures, but haven't been able to figure out where they have come from. I have heard Mustang II mirrors work?

Hoping there are a few with knowledge of what works without modifications.

Thanks in advance...

Rods&RidesLeon · 12-02-2004, 01:30 AM

I was faced with that for mine and I used a set of SunSpec Billet mirros for Trucks, They`re small, but not as small as most billet, Just big enough to be able to see good as long as you have it adjusted right, they have a wide selection of arms and mirror housings that can be interchanged. If I have a picture where you can see them Ill post it here in a few minutes

Rods&RidesLeon · 12-02-2004, 01:33 AM

here it is

Bubsco · 12-03-2004, 07:27 AM

Thanks for the scoop

da-burb · 12-03-2004, 03:07 PM

these are 80's ElCamino mirrors. The owner told me he flipped the base gasket around and it leveled the mirrors on the doors so they didn't look droopy.

Bubsco · 12-13-2004, 09:22 PM

Thanks for the help

12-01-2004, 10:36 PM	#1
Bubsco Registered User Join Date: Nov 2004 Location: Grapevine Texas Posts: 29	Bolt on mirrors for '69 sub I am looking for some knowledge on sport mirrors to replace the stock mirrors on a '69 suburban. I have seen a few in pictures, but haven't been able to figure out where they have come from. I have heard Mustang II mirrors work? Hoping there are a few with knowledge of what works without modifications. Thanks in advance...

12-02-2004, 01:33 AM	#3
Rods&RidesLeon Registered User Join Date: Aug 2004 Location: Crosy TX Posts: 46	here it is Attached Images

12-03-2004, 07:27 AM	#4
Bubsco Registered User Join Date: Nov 2004 Location: Grapevine Texas Posts: 29	Nice ... Thanks for the scoop

12-03-2004, 03:07 PM	#5
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	these are 80's ElCamino mirrors. The owner told me he flipped the base gasket around and it leveled the mirrors on the doors so they didn't look droopy. Attached Images __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

12-02-2004, 01:30 AM	#2
Rods&RidesLeon Registered User Join Date: Aug 2004 Location: Crosy TX Posts: 46	I was faced with that for mine and I used a set of SunSpec Billet mirros for Trucks, They`re small, but not as small as most billet, Just big enough to be able to see good as long as you have it adjusted right, they have a wide selection of arms and mirror housings that can be interchanged. If I have a picture where you can see them Ill post it here in a few minutes

12-13-2004, 09:22 PM	#6
Bubsco Registered User Join Date: Nov 2004 Location: Grapevine Texas Posts: 29	Thanks for the help



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.