1967 gmc pickup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mike5306 · 12-09-2004, 03:29 PM

I might have to sell my 1967 gmc 910 pickup
Its in good gondition for the year with very littlle rust
6 bolt rims and 4 speed standard and has the small rear window
the motor is a 350 but does not run and I would only sell as complete unit.
In my eyes this truck has a lot of potential to be worth a lot of money after restoration. I am not sure what to ask but I am open to offers.

Location is Standard Alberta Canada

luckydog · 12-09-2004, 04:52 PM

You gotta post your location. More details would be good too. A/C, other options, all this plays a big part in the value of your truck. If you decide to part it out I would be interested in the fenders.

chevman-67 · 12-09-2004, 08:16 PM

I don't think its a yes or no question as it is quite easy to buy after market stuff now .Origanal maybe.It depends on how far your willing to travel and is there many trucks around in the area your in I would and so-so to the poll and it depends on the part you want or need.

longnlow72 · 12-09-2004, 08:23 PM

it depends, if you want original stuff it can be hard to find some items, but the make reproductions of most parts for our trucks

**Canadian694x4** · 12-09-2004, 09:17 PM

You must be in Canada with a 910 Pickup. Where about are you located Mike?

luckydog · 12-09-2004, 09:19 PM

LOL i assumed it was a typo... What's a 910?

dyingdeadman · 12-10-2004, 06:57 AM

Quote:

Originally Posted by luckydog

LOL i assumed it was a typo... What's a 910?

I think a 910 is canada's version of a c10 (1/2 ton).

mike5306 · 12-10-2004, 11:26 AM

The 910 was canada's way to say this truck is tough .
It was handed down to a son of a local farmer here and he made an attempt to fix it up by adding a 350 which was poorly assembled and died. The interior is very plane and original except for bench seat which is newer.

East End K5 · 12-10-2004, 01:37 PM

Parts for these years are a little tough here on the Island. I found 1 in a Jyard, which didn't have much left to it.

dubie · 12-10-2004, 05:40 PM

You can find parts used and new just about anywhere for these trucks bud. Mine was built from used parts. I only bought a few newer parts such as cab corners, rockers and a fender patch. This forum is great for buying and selling parts.

View Poll Results: Are parts for older trucks easy to find?
Yes	25	89.29%
No	4	14.29%
Multiple Choice Poll. Voters: 28. You may not vote on this poll

12-09-2004, 03:29 PM	#1
mike5306 Registered User Join Date: Dec 2004 Location: Standard, Alberta , Canada Posts: 2	1967 gmc pickup I might have to sell my 1967 gmc 910 pickup Its in good gondition for the year with very littlle rust 6 bolt rims and 4 speed standard and has the small rear window the motor is a 350 but does not run and I would only sell as complete unit. In my eyes this truck has a lot of potential to be worth a lot of money after restoration. I am not sure what to ask but I am open to offers. Location is Standard Alberta Canada Attached Images Last edited by mike5306; 12-10-2004 at 10:58 AM. Reason: discription incomplete

12-09-2004, 04:52 PM	#2
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	You gotta post your location. More details would be good too. A/C, other options, all this plays a big part in the value of your truck. If you decide to part it out I would be interested in the fenders. __________________ Horsepower is how FAST you hit the wall, torque is how HARD Last edited by luckydog; 12-09-2004 at 04:57 PM.

12-09-2004, 08:16 PM	#3
chevman-67 Registered User Join Date: Jul 2004 Location: quebec canada Posts: 135	I don't think its a yes or no question as it is quite easy to buy after market stuff now .Origanal maybe.It depends on how far your willing to travel and is there many trucks around in the area your in I would and so-so to the poll and it depends on the part you want or need. __________________ gm's are #1 1967 chevrolet short step 1988 chev 4x4 1/2 ton 1989 gmc 1/2 ton 1991 chev 1/2 ton 4x4 1993 Jeep grand cherokee 4x4 And yes a 94 Ford Mustang.

12-09-2004, 08:23 PM	#4
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	it depends, if you want original stuff it can be hard to find some items, but the make reproductions of most parts for our trucks __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

12-09-2004, 09:17 PM	#5
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	You must be in Canada with a 910 Pickup. Where about are you located Mike? __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

12-09-2004, 09:19 PM	#6
luckydog < Fav Place on Earth! Join Date: Sep 2004 Location: South West Michigan Posts: 307	LOL i assumed it was a typo... What's a 910? __________________ Horsepower is how FAST you hit the wall, torque is how HARD

12-10-2004, 11:26 AM	#8
mike5306 Registered User Join Date: Dec 2004 Location: Standard, Alberta , Canada Posts: 2	The 910 was canada's way to say this truck is tough . It was handed down to a son of a local farmer here and he made an attempt to fix it up by adding a 350 which was poorly assembled and died. The interior is very plane and original except for bench seat which is newer.

12-10-2004, 01:37 PM	#9
East End K5 Registered User Join Date: Nov 2004 Location: Long Island NY Posts: 293	Parts for these years are a little tough here on the Island. I found 1 in a Jyard, which didn't have much left to it. __________________ I feel sorry for people who don't drink....because when they wake up in the morning, that's the best they're gonna feel all day long!---Frank Sinatra RIP [B]1972 Chevrolet K5 Blazer RIP 1986 GMC Sierra K3500 1TON, Long Box, V8350 RIP 1980 Chevy Silverado C30 Cab and Chassis, 454 TH400HD. RIP [B] 1995 Chevrolet Tahoe 2D [B]

12-10-2004, 05:40 PM	#10
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	You can find parts used and new just about anywhere for these trucks bud. Mine was built from used parts. I only bought a few newer parts such as cab corners, rockers and a fender patch. This forum is great for buying and selling parts. __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.