Factory Tach - The 1947 - Present Chevrolet & GMC Truck Message Board Network

T_Dilley · 12-14-2004, 05:50 PM

I'm selling a loose tachometer from a '75 SWB. $50

I also have several other misc. interior parts and gauges ranging from 60-87 Chevy trucks. Just let me know what you need and more likely than not I can find it somewhere near me.

**crossy** · 12-14-2004, 08:59 PM

do you know if it works and do you have paypal ? thanx , DAVE

T_Dilley · 12-14-2004, 09:25 PM

Yes, it was a working pull.

**crossy** · 12-14-2004, 10:05 PM

email me at all4trux@snip.net and I'll check that later tonight, thanx, DAVE

YumaKaraoke · 12-15-2004, 03:47 PM

Is that Tach still up for grabs....Did it come from a 8 cyl engine???

Thanks

**crossy** · 12-15-2004, 04:36 PM

i'm trying to work out the deal with him- off forum , DAVE

T_Dilley · 12-15-2004, 11:59 PM

Sorry everybody, Crossy has claimed the tach. If I run across another one, it will be posted.

**crossy** · 12-16-2004, 06:43 AM

Hey ,every Now And Then Even I Get Lucky;-)

NO LONGER DISTURBED KONCEPTZ · 12-20-2004, 11:27 PM

I would like to know when you get one and was the fuel gauge one of the small ones. Oh, I would like 2 of them.

1980 Chevy · 12-21-2004, 01:42 PM

Looking for a working clock for my 80 silverado.

alf4444 · 12-21-2004, 05:36 PM

If anyone is still looking I have a complete cluster with a fact. tach. It came out of a non op can't remember what year and I have a woodgrain bezel for it too, but the PO mounted a kc light switch to it. They are both boxed up and ready to ship. 125 obo

alf4444 · 12-21-2004, 05:44 PM

its out of a 77

NO LONGER DISTURBED KONCEPTZ · 12-21-2004, 07:51 PM

Well, I talked with my friend about this and he said that most of the tachs came in trucks with big blocks in them. Do any of you have a pic of the complete cluster???

77gmcjoe · 12-21-2004, 08:05 PM

Here's mine. Since this was taken I replaced the 60 psi oil gauge with an 80 psi from a medium duty truck.

NO LONGER DISTURBED KONCEPTZ · 12-21-2004, 08:15 PM

Thanks me and my friend were wondering where the fuel gauge was.

jeffs98 · 02-13-2005, 09:45 PM

Does anyone still have a tach for sale or are all the good ones taken!! I could use a replacement for my 82??

coalman_1 · 02-13-2005, 10:21 PM

Here's a picture of my cluster I built for my
81 Silverado

butter45@swbell.net

12-14-2004, 05:50 PM	#1
T_Dilley Can't tell me nothin' Join Date: Nov 2004 Location: Pana, IL Posts: 250	Factory Tach I'm selling a loose tachometer from a '75 SWB. $50 I also have several other misc. interior parts and gauges ranging from 60-87 Chevy trucks. Just let me know what you need and more likely than not I can find it somewhere near me. Attached Images

12-14-2004, 08:59 PM	#2
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	do you know if it works and do you have paypal ? thanx , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

12-14-2004, 10:05 PM	#4
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	email me at all4trux@snip.net and I'll check that later tonight, thanx, DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

12-15-2004, 04:36 PM	#6
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	i'm trying to work out the deal with him- off forum , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

12-16-2004, 06:43 AM	#8
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Hey ,every Now And Then Even I Get Lucky;-) __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

12-14-2004, 09:25 PM	#3
T_Dilley Can't tell me nothin' Join Date: Nov 2004 Location: Pana, IL Posts: 250	Yes, it was a working pull.

12-15-2004, 03:47 PM	#5
YumaKaraoke Registered User Join Date: Dec 2004 Location: Yuma, Arizona Posts: 14	Is that Tach still up for grabs....Did it come from a 8 cyl engine??? Thanks

12-15-2004, 11:59 PM	#7
T_Dilley Can't tell me nothin' Join Date: Nov 2004 Location: Pana, IL Posts: 250	Sorry everybody, Crossy has claimed the tach. If I run across another one, it will be posted.

12-20-2004, 11:27 PM	#9
NO LONGER DISTURBED KONCEPTZ Registered User Join Date: Aug 2004 Posts: 257	I would like to know when you get one and was the fuel gauge one of the small ones. Oh, I would like 2 of them.

12-21-2004, 01:42 PM	#10
1980 Chevy Registered User Join Date: Apr 2004 Location: Burleson, Texas Posts: 55	Looking for a working clock for my 80 silverado.

12-21-2004, 05:36 PM	#11
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	If anyone is still looking I have a complete cluster with a fact. tach. It came out of a non op can't remember what year and I have a woodgrain bezel for it too, but the PO mounted a kc light switch to it. They are both boxed up and ready to ship. 125 obo __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

12-21-2004, 05:44 PM	#12
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	its out of a 77 __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

12-21-2004, 07:51 PM	#13
NO LONGER DISTURBED KONCEPTZ Registered User Join Date: Aug 2004 Posts: 257	Well, I talked with my friend about this and he said that most of the tachs came in trucks with big blocks in them. Do any of you have a pic of the complete cluster???

12-21-2004, 08:05 PM	#14
77gmcjoe What do we get for $10? Join Date: Oct 2004 Location: Beardstown, Illinois Posts: 341	Here's mine. Since this was taken I replaced the 60 psi oil gauge with an 80 psi from a medium duty truck. Attached Images __________________ 1977 GMC K25 400/400/205 1989 Chevy Suburban R1500 350/700R4 (work beater) 1994 Chevy K3500 dually 454/4L80 1996 Corvette LT4 350/ZF 6 speed 2000 Bonneville SSEI Supercharged 3.8 Liter V6 1966 Chevelle 2 door sedan (Needs major repair ) Last edited by 77gmcjoe; 12-21-2004 at 08:10 PM.

12-21-2004, 08:15 PM	#15
NO LONGER DISTURBED KONCEPTZ Registered User Join Date: Aug 2004 Posts: 257	Thanks me and my friend were wondering where the fuel gauge was.



Register or Log In To remove these advertisements.

02-13-2005, 09:45 PM	#16
jeffs98 Registered User Join Date: Jun 2004 Location: Parsons, Kansas Posts: 139	Does anyone still have a tach for sale or are all the good ones taken!! I could use a replacement for my 82??

02-13-2005, 10:21 PM	#17
coalman_1 Registered User Join Date: Jan 2005 Location: DALLAS TX. Posts: 4	Here's a picture of my cluster I built for my 81 Silverado butter45@swbell.net Attached Images Last edited by coalman_1; 02-13-2005 at 10:27 PM.

Register or Log In To remove these advertisements.