Made it out the driveway and back for the first time - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70 shorty · 12-19-2004, 08:35 PM

I took the truck to get gas, to Blockbuster and and to the grocery store, (all in the same complex). First trip up the road and back, and it made it back! Anyway, the timing is still to far advanced, it's real hard to start warm, the header leaks, I hooked up the heater core, but coolant just ran out, so no heat or defrost yet, and has a stumble when you try to speed up from a cruising speed. I'm just happy it got me there and back. Now for a longer trip, today's was maybe 5 miles. No leaks though, and everything basically worked fine.

Wootdog · 12-19-2004, 08:45 PM

Made you feel good didn't it? I went up the street for the first time two weeks ago. Took it to get the door poppers worked on. They had less of a clue than I did. (The people who worked on them). Got back to the house smelled something not right. It appears that the left rear brake pads were rubbing.It has disks all the way around. Well after two to five nights after work and a whole weekend days of checking this and that out, I had a Buddy come over who tells me that My rear bracket on the rear end for the Nine Inch with disks I have is not welded on the axle tub correctly. (The rear end is a Ford and has been shortened eight inches). I end up putting a lock washer in the top two bolts to compensate for the tightness of the pads. Tomorrow I get to take it out for the second time. Makes you wanna get a Beer don't it?
Kerry

70 shorty · 12-20-2004, 02:54 PM

A beer? There's no such thing! I was thinking of filling the bed with cases!

*Randy70C-10* · 12-20-2004, 03:05 PM

Hmmmm, naaaaa. Cases of beer ain't enough here.

Glad to hear that all is well, now you have to drive it here and show it off. Hmmmmm, we should do a board cookout at my house this summer.

purple gas · 12-20-2004, 06:34 PM

Congrats on the first succesful tour!! I had hoped to have my truck runnin by June. It was October when I made the maiden vouage home from the Muffler shop. ( I got it towed there. 20 yrs ago I'd just as likely drove it there with open headers and a beer between my legs. But, I'm not like that anymore) Since then it's been a couple times around the block. It's still got lots of issues issues, but it's got cold now. After spending ALL my free time this spring & summer on my truck I didn't get around to getting the heat put in my shop. She's on the back burner for a while, but I can say I drove it. Maybe by next June I'll be able to go five miles.. Good on you man!

70 shorty · 12-20-2004, 06:47 PM

Ransy, that's my kind of truck! I think we should build it, and I'd be happy to keep it garaged at my house!

*Randy70C-10* · 12-20-2004, 06:49 PM

I've already started gathering the parts (really), I'll probably need help drinking the beer though.

70 shorty · 12-20-2004, 07:01 PM

Do you think you could run a 100 mile pipeline with a tap to my house? It'd be a lot more convenient than having to drive there every time a want a beer. However, after all that beer, I'm sure a lot of interesting projects could be completed! (Hey, how come there's only 3 wheels on this truck?) Damn Randy, you made me have to run to the fridge for a beer and I havent even eaten dinner yet!. (Like that ever stopped me.)

*Randy70C-10* · 12-20-2004, 08:10 PM

I think that a pipeline might ruin the accuracy of the "born-on" date, resulting in stale beer.

70 shorty · 12-20-2004, 08:50 PM

Nah, just power it with a Blown Big Block.

12-19-2004, 08:35 PM	#1
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	Made it out the driveway and back for the first time I took the truck to get gas, to Blockbuster and and to the grocery store, (all in the same complex). First trip up the road and back, and it made it back! Anyway, the timing is still to far advanced, it's real hard to start warm, the header leaks, I hooked up the heater core, but coolant just ran out, so no heat or defrost yet, and has a stumble when you try to speed up from a cruising speed. I'm just happy it got me there and back. Now for a longer trip, today's was maybe 5 miles. No leaks though, and everything basically worked fine. __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

12-19-2004, 08:45 PM	#2
Wootdog Senior Member Join Date: Jan 2001 Location: Virginia Beach, Va, USA Posts: 1,683	Great Made you feel good didn't it? I went up the street for the first time two weeks ago. Took it to get the door poppers worked on. They had less of a clue than I did. (The people who worked on them). Got back to the house smelled something not right. It appears that the left rear brake pads were rubbing.It has disks all the way around. Well after two to five nights after work and a whole weekend days of checking this and that out, I had a Buddy come over who tells me that My rear bracket on the rear end for the Nine Inch with disks I have is not welded on the axle tub correctly. (The rear end is a Ford and has been shortened eight inches). I end up putting a lock washer in the top two bolts to compensate for the tightness of the pads. Tomorrow I get to take it out for the second time. Makes you wanna get a Beer don't it? Kerry __________________ 1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT

12-20-2004, 02:54 PM	#3
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	A beer? There's no such thing! I was thinking of filling the bed with cases! __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

12-20-2004, 06:47 PM	#6
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	Ransy, that's my kind of truck! I think we should build it, and I'd be happy to keep it garaged at my house! __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

12-20-2004, 07:01 PM	#8
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	Do you think you could run a 100 mile pipeline with a tap to my house? It'd be a lot more convenient than having to drive there every time a want a beer. However, after all that beer, I'm sure a lot of interesting projects could be completed! (Hey, how come there's only 3 wheels on this truck?) Damn Randy, you made me have to run to the fridge for a beer and I havent even eaten dinner yet!. (Like that ever stopped me.) __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

12-20-2004, 03:05 PM	#4
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Hmmmm, naaaaa. Cases of beer ain't enough here. Glad to hear that all is well, now you have to drive it here and show it off. Hmmmmm, we should do a board cookout at my house this summer.

12-20-2004, 06:34 PM	#5
purple gas Registered User Join Date: Oct 2004 Location: saskatoon, planet earth Posts: 694	Congrats on the first succesful tour!! I had hoped to have my truck runnin by June. It was October when I made the maiden vouage home from the Muffler shop. ( I got it towed there. 20 yrs ago I'd just as likely drove it there with open headers and a beer between my legs. But, I'm not like that anymore) Since then it's been a couple times around the block. It's still got lots of issues issues, but it's got cold now. After spending ALL my free time this spring & summer on my truck I didn't get around to getting the heat put in my shop. She's on the back burner for a while, but I can say I drove it. Maybe by next June I'll be able to go five miles.. Good on you man!

12-20-2004, 06:49 PM	#7
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	I've already started gathering the parts (really), I'll probably need help drinking the beer though.

12-20-2004, 08:10 PM	#9
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	I think that a pipeline might ruin the accuracy of the "born-on" date, resulting in stale beer.

12-20-2004, 08:50 PM	#10
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	Nah, just power it with a Blown Big Block. __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.