5/7 drop pics? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fossilrunner · 12-25-2004, 10:55 PM

looking for 5/7 drop pics

SCOTI · 12-26-2004, 01:57 AM

5/7+

70short · 12-26-2004, 05:00 AM

Did you C notch the frame for that drop?? Looks good!!!

SCOTI · 12-26-2004, 05:06 PM

Yep. Bolt in c-notch (that's now been welded) & adjustable panhard bar.

Vince M · 12-26-2004, 07:25 PM

SCOTI, Off topic a bit but just curious as to the color of your truck. Do you have the glovebox code?

SCOTI · 12-27-2004, 01:13 AM

http://67-72chevytrucks.com/vboard/s....php3?t=132855

Check this link out & look under 1968. Mine is the Saddle Fawn.

fossilrunner · 12-28-2004, 11:59 AM

Ttt
Still Need Pics

12-25-2004, 10:55 PM	#1
fossilrunner Registered User Join Date: Feb 2004 Location: FORT WORTH, TX Posts: 225	5/7 drop pics? looking for 5/7 drop pics __________________ 71 chevy lwb w/ 350,750 holley 4150,edelbrock performer rpm,full 2 1/2 exhaust exit out side,6-8 drop,rally wheels.-SOLD 74 Chevy nova-355 with a little nitrous 78 GMC Jimmy 4x4-Factory 400 and all stock.

12-26-2004, 01:57 AM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	5/7+ Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-26-2004, 05:00 AM	#3
70short Registered User Join Date: Sep 2003 Location: Boise ID Posts: 609	Did you C notch the frame for that drop?? Looks good!!! __________________ "72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES"

12-26-2004, 05:06 PM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Yep. Bolt in c-notch (that's now been welded) & adjustable panhard bar. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-26-2004, 07:25 PM	#5
Vince M Senior Member Join Date: Apr 2000 Location: Orlando, FL Posts: 1,076	SCOTI, Off topic a bit but just curious as to the color of your truck. Do you have the glovebox code? __________________ ............................................................ 68 Chevy CST SWB w/LS1, carb & 700r4. Golden Anniversary clone with a few improvements.

12-27-2004, 01:13 AM	#6
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	http://67-72chevytrucks.com/vboard/s....php3?t=132855 Check this link out & look under 1968. Mine is the Saddle Fawn. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 12-27-2004 at 01:15 AM.

12-28-2004, 11:59 AM	#7
fossilrunner Registered User Join Date: Feb 2004 Location: FORT WORTH, TX Posts: 225	Ttt Still Need Pics __________________ 71 chevy lwb w/ 350,750 holley 4150,edelbrock performer rpm,full 2 1/2 exhaust exit out side,6-8 drop,rally wheels.-SOLD 74 Chevy nova-355 with a little nitrous 78 GMC Jimmy 4x4-Factory 400 and all stock.



Register or Log In To remove these advertisements.