|
12-30-2004, 08:24 PM
|
#1 |
|
What was I thinking??
Join Date: Dec 2003
Location: Commerce City Co
Posts: 637
|
It's Bed time...
As some of you may know My 71 GMC has a utilty bed and I would like to get a normal bed for it. I just don't need that much storage. So today I hit a local junk yard and find a 71 Longbed in fair shape down a few cars I find a 73 long step in better shape. they are asking 150 for either one. Over all I like the long step mostly because it is in better shape and just about all of it is there but the tailgate. The Fleetside has the tailgate but I would have to get all the light housings..
My big question is will the 73 fit. is it a bolt on or will I have to fab up mounts? Thanks Guys Eric
__________________
72 K5 that needs lots of parts.. 71 GMC 3/4 4x4 That doesn't need much which is a good thing I don't think I could aford another money pit... |
|
|
|
12-30-2004, 08:26 PM
|
#2 |
|
Watch out for your cornhole !
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
The fenders will be shaped wrong for a 71. Can you live with that?
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
|
|
|
12-30-2004, 08:36 PM
|
#3 |
|
What was I thinking??
Join Date: Dec 2003
Location: Commerce City Co
Posts: 637
|
Well.
I had forgot to look if they were different. But over all I don't mind I have gotten used to this.....
__________________
72 K5 that needs lots of parts.. 71 GMC 3/4 4x4 That doesn't need much which is a good thing I don't think I could aford another money pit... |
|
|
|
|
12-30-2004, 08:39 PM
|
#4 |
|
Registered User
Join Date: Oct 2003
Location: Central Vermont
Posts: 8,538
|
Wish you were closer, I'd buy the utility bed from ya.
|
|
|
|
|
12-30-2004, 08:41 PM
|
#5 | |
|
Watch out for your cornhole !
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Quote:
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
|
|
|
|
12-30-2004, 08:51 PM
|
#6 | |
|
Registered User
Join Date: Oct 2003
Location: Central Vermont
Posts: 8,538
|
Quote:
 Of course using my 72 burb is kinda cool too. |
|
|
|
|
|
12-30-2004, 08:53 PM
|
#7 |
|
State of Confusion!
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,845
|
Although it will work, it will look out of place. The rear wheels will not be centered in the step wheel openings. At least they don't on the short steps, so I would assume that it is the same for long step. For my $.02, go with the 71 bed.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
|
|
|
|
12-30-2004, 08:56 PM
|
#8 |
|
What was I thinking??
Join Date: Dec 2003
Location: Commerce City Co
Posts: 637
|
I haven't found anyone that wants this thing...lol. I do like the bed but it's just to much. I'm sure it weighs just a little bit too.
__________________
72 K5 that needs lots of parts.. 71 GMC 3/4 4x4 That doesn't need much which is a good thing I don't think I could aford another money pit... |
|
|
|
|
12-30-2004, 09:15 PM
|
#9 |
|
Chevy Nuttttt
Join Date: Sep 2004
Location: Santa Maria Ca.
Posts: 568
|
you should trade the thing for the price of the step bed and the corect fenders
__________________
67' Chev swb step side 69' SS elky 03' Chev ext cab 4X4 hey who lernt me to spell   is there anything else?
|
|
|
|
|
12-30-2004, 09:38 PM
|
#10 |
|
What was I thinking??
Join Date: Dec 2003
Location: Commerce City Co
Posts: 637
|
I asked the yard if they would trade me but no. And I haven't run into anyone that has a need for mine yet...
Would the fender bolt holes be the same? Or would I have to weld the olds ones up and drill new ones...
__________________
72 K5 that needs lots of parts.. 71 GMC 3/4 4x4 That doesn't need much which is a good thing I don't think I could aford another money pit... |
|
|
|
|
12-30-2004, 10:44 PM
|
#11 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
The wheel base on the 73 - 87 is something like 131 isn't it? (verses the 127 on your rig)
|
|
|
|
|
12-30-2004, 11:16 PM
|
#12 |
|
What was I thinking??
Join Date: Dec 2003
Location: Commerce City Co
Posts: 637
|
You are right Longhorn. I did a search and the 73/87 are 131.5....So the longstep is out of the question.
The price of the 71 fleetside is a good one but I'm not sold on it yet.
__________________
72 K5 that needs lots of parts.. 71 GMC 3/4 4x4 That doesn't need much which is a good thing I don't think I could aford another money pit... |
|
|
|
|
12-31-2004, 12:19 AM
|
#13 |
|
Sisyphus was my mentor!
Join Date: Sep 2002
Location: Carleton Place, Ontario CANADA
Posts: 984
|
I think utility beds look sweet with the right paint & some aluminum checkerplate in the right places. I wish somebody had one locally had one to get rid of, I'd be there in a minute!
__________________
passthebuck  #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car |
|
|
|
|
12-31-2004, 02:48 AM
|
#14 |
|
Registered User
Join Date: May 2003
Location: brooksville-fla
Posts: 77
|
I'd chop the bed to the height of a stocker and do something with the wheel well opening to help it blend in and it would be really cool
I don't have photoshop but I did a quick -MS paint-overhaul
__________________
1972 LWB 4x4 1970 LWB 2wd 1971 chevelle 1972 datsun PL-521/nissan |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
