Engines and parts 4 sale/Ks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cadiac · 01-01-2005, 04:05 PM

Time to clear some stuff I'm not going to use. 2 core engines/both were running -1 77 454/from 1 ton truck all or mostly complete/[might be missing an exhaust manifold] ----1 70 350/from 1/2 pickup[is 4 bolt] /no carb -starter or exhaust [I do have manifolds that you can have with] Asking $400 for the big block --$200 for the small block. --1 pair of 1/2 ton 67-72 trailing arms/very decent $75 --2 S.B. iron quadrajet intakes $20 per --1 pair 882 S.B. heads from a 74 400/80K miles $50 --1 pair 307 heads/casting # 454 $20 --3 cab cowl panels/are straight $10 per --1 aluminum clear rear slider $25 --1 pair dark green visors [from a 72] $30 --I have rocker covers/oil pans and engine hardware for small blocks that I'll get out and take pics of. I'm into Cadillac 500/472 engines -"Offers are Welcome", --trade for Cad. engines? I could use a rust and dent free [very minor dent OK] right fender for my 69 PU. I brought home a 72 3/4 camper special that I'm going to use to get my 69 Camper special 3/4 up and running, -so will have parts from it as well. "More parts" --green door panel --1 glove box door --6 350 rods and pistone --6 454 rods and pistons full set of alt/ pwr str. brkts for a 70 350 -- hardware and pan -pulleys from an 80's S.B./partial serpentine pulleys--various covers/oilpans [1 B.B.] --2 T350's/short & long tails --1 T375[400 small output shaft] -$25 each for T350's and $50 for T375 --1 auto trans crossmember $20. --Take a look and OFFER! -I need to clean out. smbker@cox.net

67chev · 01-01-2005, 04:11 PM

would like to see a pic of your M/T valve covers if you have one. Possibly interested.

69ssnova · 01-01-2005, 06:12 PM

what is the block numbers and the date code on the 350 thanks greg

ACES · 01-01-2005, 07:29 PM

What part of KS are you in?

cadiac · 01-01-2005, 08:59 PM

69 ssnova---Sent a Pm. -Steve

cadiac · 01-01-2005, 09:00 PM

Wichita -Steve

cadiac · 01-01-2005, 09:02 PM

Posted 1 left bed pic -I swear the right is exactly the same! The shop is jammed, -I'll move the truck over to take more pics later. -Steve

cadiac · 01-01-2005, 09:26 PM

"67chev" --Posted a pic -look for my other post. -Thanks -Steve

dons454s · 01-01-2005, 10:29 PM

any bb power steering pump and brackets there for a long water pump

beautimus · 01-02-2005, 12:12 AM

if you have any way to ship, i would like to buy the 402 out of the suburban.

cadiac · 01-02-2005, 12:44 AM

It is shippable, -by Yellow Freight would cost $350 -$450 or there abought on a pallet. I'm going by what it cost me a few years back to get an engine from Florida. Let me know. -Steve

beautimus · 01-02-2005, 02:09 AM

ok, if your shipping, i am buying !!!!!!
i will p.m. you my shipping info.
you figure shipping and something for your trouble.
thanks, Tony

meathead95 · 01-02-2005, 11:07 AM

i would take a complete short water pump bracket and pulley set up for bbc.

cadiac · 01-02-2005, 01:35 PM

"Dons454's" -I'll look, -the 77 454 may have them.

cadiac · 01-02-2005, 01:41 PM

Theres a set in the rectangular box/stuff is painted black --PIC is in Other POST-- I think you want water pump -crank pulleys and alternator brackets. -How about the power steering? Let me know. -Steve

Quote:

Originally Posted by meathead95

i would take a complete short water pump bracket and pulley set up

meathead95 · 01-02-2005, 02:26 PM

Quote:

Originally Posted by cadiac

Theres a set in the rectangular box/stuff is painted black --PIC is in Other POST-- I think you want water pump -crank pulleys and alternator brackets. -How about the power steering? Let me know. -Steve

yes i would want it all ps too (pump and brackets)

cadiac · 01-02-2005, 02:58 PM

Ok -The whole setup/ the water pump is probably even good -the steering pump worked fine when removed. Hows $40 and shipping? Thanks -Steve

Quote:

Originally Posted by meathead95

yes i would want it all ps too (pump and brackets)

wannabeburbowner · 01-02-2005, 03:26 PM

How much would it cost to ship the trailing arms to 44663??

Thanks,

Travis

cadiac · 01-02-2005, 03:31 PM

Will find out -Steve

Quote:

Originally Posted by wannabeburbowner

How much would it cost to ship the trailing arms to 44663??

Thanks,

Travis

crazy4chevs · 01-02-2005, 04:28 PM

Too bad your so far away. I have a complete caddy 500 from a 70 eldorado I would of traded you for the 454. Dang, LOL

dons454s · 01-02-2005, 04:30 PM

Quote:

Originally Posted by cadiac

"Dons454's" -I'll look, -the 77 454 may have them.

Thanks please let me know
Don

cadiac · 01-02-2005, 04:55 PM

I second that DANG.

Quote:

Originally Posted by crazy4chevs

Too bad your so far away. I have a complete caddy 500 from a 70 eldorado I would of traded you for the 454. Dang, LOL

meathead95 · 01-02-2005, 06:04 PM

pm sent

cadiac · 01-02-2005, 10:59 PM

Sent a PM. -Steve

Quote:

Originally Posted by wannabeburbowner

How much would it cost to ship the trailing arms to 44663??

Thanks,

Travis

cadiac · 01-02-2005, 11:14 PM

Sending PM. -Steve

Quote:

Originally Posted by dons454s

any bb power steering pump and brackets there for a long water pump

01-01-2005, 04:05 PM	#1
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Engines and parts 4 sale/Ks Time to clear some stuff I'm not going to use. 2 core engines/both were running -1 77 454/from 1 ton truck all or mostly complete/[might be missing an exhaust manifold] ----1 70 350/from 1/2 pickup[is 4 bolt] /no carb -starter or exhaust [I do have manifolds that you can have with] Asking $400 for the big block --$200 for the small block. --1 pair of 1/2 ton 67-72 trailing arms/very decent $75 --2 S.B. iron quadrajet intakes $20 per --1 pair 882 S.B. heads from a 74 400/80K miles $50 --1 pair 307 heads/casting # 454 $20 --3 cab cowl panels/are straight $10 per --1 aluminum clear rear slider $25 --1 pair dark green visors [from a 72] $30 --I have rocker covers/oil pans and engine hardware for small blocks that I'll get out and take pics of. I'm into Cadillac 500/472 engines -"Offers are Welcome", --trade for Cad. engines? I could use a rust and dent free [very minor dent OK] right fender for my 69 PU. I brought home a 72 3/4 camper special that I'm going to use to get my 69 Camper special 3/4 up and running, -so will have parts from it as well. "More parts" --green door panel --1 glove box door --6 350 rods and pistone --6 454 rods and pistons full set of alt/ pwr str. brkts for a 70 350 -- hardware and pan -pulleys from an 80's S.B./partial serpentine pulleys--various covers/oilpans [1 B.B.] --2 T350's/short & long tails --1 T375[400 small output shaft] -$25 each for T350's and $50 for T375 --1 auto trans crossmember $20. --Take a look and OFFER! -I need to clean out. smbker@cox.net Attached Images Last edited by cadiac; 01-27-2005 at 09:59 PM.

01-01-2005, 04:11 PM	#2
67chev Registered User Join Date: Apr 2004 Location: Spokane, WA Posts: 458	would like to see a pic of your M/T valve covers if you have one. Possibly interested. __________________ "SicStee8" Chevy SWB Fleetside, in progress...500 HP 383 w/TriPower, 700r4, 3.73's, Lowered, Shaved Driprail/sidemarkers/handles/ant, Gonna rock!! '96 Chevy Tahoe 4X4 '84 Chevy C/K10 4X4 (FOR SALE)

01-01-2005, 07:29 PM	#4
ACES Life is a gamble Join Date: Oct 2003 Location: Lee's Summit, MO Posts: 796	What part of KS are you in? __________________ 1970 Orange CST C-10 w/350, posi, Longbed The torpid artist seeks inspiration at any cost, by virtue or by vice, by friend or by fiend, by prayer or by wine. -- Ralph Waldo Emerson

01-01-2005, 08:59 PM	#5
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	69 ssnova---Sent a Pm. -Steve Last edited by cadiac; 01-01-2005 at 09:00 PM. Reason: ad info

01-01-2005, 09:02 PM	#7
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Posted 1 left bed pic -I swear the right is exactly the same! The shop is jammed, -I'll move the truck over to take more pics later. -Steve Last edited by cadiac; 01-01-2005 at 09:29 PM. Reason: info

01-01-2005, 06:12 PM	#3
69ssnova Registered User Join Date: Dec 2002 Location: rock hill sc Posts: 69	what is the block numbers and the date code on the 350 thanks greg

01-01-2005, 09:00 PM	#6
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Wichita -Steve

01-01-2005, 09:26 PM	#8
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	"67chev" --Posted a pic -look for my other post. -Thanks -Steve Last edited by cadiac; 01-01-2005 at 09:28 PM. Reason: info

01-01-2005, 10:29 PM	#9
dons454s Registered User Join Date: Nov 2004 Location: Claysburg, Pa Posts: 408	any bb power steering pump and brackets there for a long water pump

01-02-2005, 12:12 AM	#10
beautimus Registered User Join Date: Mar 2002 Location: woodstock, alabama, usa Posts: 938	if you have any way to ship, i would like to buy the 402 out of the suburban. __________________ i survived cancer and kidney stones, but my kids are killing me.

01-02-2005, 12:44 AM	#11
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	It is shippable, -by Yellow Freight would cost $350 -$450 or there abought on a pallet. I'm going by what it cost me a few years back to get an engine from Florida. Let me know. -Steve

01-02-2005, 02:09 AM	#12
beautimus Registered User Join Date: Mar 2002 Location: woodstock, alabama, usa Posts: 938	ok, if your shipping, i am buying !!!!!! i will p.m. you my shipping info. you figure shipping and something for your trouble. thanks, Tony __________________ i survived cancer and kidney stones, but my kids are killing me.

01-02-2005, 11:07 AM	#13
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	i would take a complete short water pump bracket and pulley set up for bbc. __________________ 72 2wd blazer 72 swb 4x4 Last edited by meathead95; 01-02-2005 at 06:06 PM.

01-02-2005, 01:35 PM	#14
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	"Dons454's" -I'll look, -the 77 454 may have them. Last edited by cadiac; 01-02-2005 at 01:37 PM.

01-02-2005, 03:26 PM	#18
wannabeburbowner Registered User Join Date: Dec 2004 Location: New Philadelphia, Ohio Posts: 253	How much would it cost to ship the trailing arms to 44663?? Thanks, Travis



Register or Log In To remove these advertisements.

01-02-2005, 04:28 PM	#20
crazy4chevs Registered User Join Date: Oct 2002 Location: Des Moines WA. (Kent, area) Posts: 668	Too bad your so far away. I have a complete caddy 500 from a 70 eldorado I would of traded you for the 454. Dang, LOL __________________ 70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington .

01-02-2005, 06:04 PM	#23
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	pm sent __________________ 72 2wd blazer 72 swb 4x4

Register or Log In To remove these advertisements.