All Kinds Of Chevy Stuff! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bloertcher · 01-03-2005, 02:54 AM

I got some stuff I don't need,and need money for stuff I ain't got.
1 pair of World Sportsman iron heads for SBC
Never ran since freshening,200cc with porting,2.02/1.60,64cc chambers.New springs good to .600 lift.Asking $675obo
1 Edelbrock Performer vortec intake,bolted on but never ran.$100
New Comp .550 lift solid cam for SBC,no lifters,never ran.$50
1 Weiand x-celerator intake for BBC oval port,good shape.$50
Used Comp solid cam and lifters for BBC,.595/.595 lift,perfect condition,went to a smaller hydraulic cam,$100
.60 over Spreed Pro forged pistons for 454 BBC,with HD truck rods,.580 dome with Hyper-Flex rings,great condition,ready to run.$300
Used TH350c (lockup) trans for chevy,worked great when I pulled it,only been out a week or so.$100
Fresh .30 over 350 two bolt block,tanked,new freeze plugs/cam bearings,ready to assemble.$200.
I'm new to shipping stuff,but I can do it.
email at bloertcher@aol.com

dons454s · 01-03-2005, 02:52 PM

Sent email on the bbc intake

dion · 01-03-2005, 04:52 PM

PM sent

*1FaastC10* · 01-03-2005, 05:01 PM

is the Performer Vortec intake square bore or spread bore? (Holley/AFB or QJet?) if its spread bore, i'll take it.

*1FaastC10* · 01-04-2005, 07:00 PM

???

*1FaastC10* · 01-07-2005, 05:04 PM

did you forget about me?

*1FaastC10* · 01-09-2005, 12:17 AM

Ttt

dons454s · 01-09-2005, 01:47 AM

Not sure what happened I am still waiting on my total too. Does any one know how to get ahold of him other than email???
Don

*1FaastC10* · 01-10-2005, 10:12 PM

forget it, the guy cant even answer and IM, or an email. must not want to sell his parts too bad.

dons454s · 01-11-2005, 12:33 AM

Glad we didnt pay him

*1FaastC10* · 01-11-2005, 12:38 AM

no doubt.

bloertcher · 01-11-2005, 04:28 AM

Sorry fellas,computer down for a few days.Not starving,never asked either of you for a dime.Glad to know I'm the only one who's ever had PC trouble,God knows it's a rare occourence.

*1FaastC10* · 01-11-2005, 11:36 AM

Quote:

Originally Posted by bloertcher

Sorry fellas,computer down for a few days.Not starving,never asked either of you for a dime.Glad to know I'm the only one who's ever had PC trouble,God knows it's a rare occourence.

thats funny, your wife didnt have any problems signing on, i spoke with her the other day. or was that really you? oh, and not to mention, "bloertcher" has been signed on on my buddylist all week. hey, thanks for the great IM too...

Quote:

Originally Posted by bloertcher

Sorry I'm such a ****in' crook,computers don't ever break down or nothing.

bloertcher · 01-12-2005, 02:39 AM

Whatever ya think,pal.Pc went down Friday,couldn't get it fixed til Monday evening.You don't want the intake,I don't want anything from you,let it go at that.

Hoods69BadBowTie · 01-12-2005, 03:45 AM

Wow, I don't think I want nothing off you either. I was gonna see what you got left but F*** it,

bloertcher · 01-12-2005, 04:39 AM

Let's get this straight.Did I ask one of you for a dime?If I'm so crooked,why didn't I just pop up with a phony shipping quote,get your money,and then "dissapear"?My daughter was sick last week,and my computer crashed.I could give two ****s if you believe me or not.Hoods69,you can **** yourself.You know no details,and assume you do.I offered some deals,and had alot going soon after.Yes,I was trying to get some stuff together for fastc10 and dond454.My apologies for not doing so immediately.But my daughter is MUCH more important to me than ANYONE on this board.Got all the shipping info on Friday afternoon,crash Friday evening.In the meantime,people start talking ****,my name is smeared because I don't operate a next-day parts warehouse.Again,if I'm so dishonest,WHY DIDN'T I ASK FOR PAYMENT?If you fellas don't want to buy stuff,that's fine,they aren't eating anything.But unless anyone was involved in this misunderstanding,they really have no right to talk ****,do they?

*1FaastC10* · 01-12-2005, 05:52 PM

i was told that you'd have a shipping quote on Wednesday, via IM. you never followed through with that for almost a week. you never answered any of the IMs i sent you, or posts in this thread, although you were in fact online. that's one thing you didnt follow through on. then when you finally do respond, you come up with an obvious BS excuse of computer troubles. if your computer was that broke, why were you online? then, suddenly this morning the difficulties you had in the past week change from computer troubles, to your daughter's illness. i for one am not buying it, if she was really sick why didnt you just say so in the begining?

i'm just looking out for myself and my fellow board members. last i checked, dishonest people didnt turn honest when you put money in their pockets. and on that note, i am done with this post.

***Liz*** · 01-12-2005, 10:53 PM

next time take it to PM or STFU.............. closed

01-03-2005, 02:54 AM	#1
bloertcher Registered User Join Date: Jul 2003 Location: Springfield,Mo. Posts: 305	All Kinds Of Chevy Stuff! I got some stuff I don't need,and need money for stuff I ain't got. 1 pair of World Sportsman iron heads for SBC Never ran since freshening,200cc with porting,2.02/1.60,64cc chambers.New springs good to .600 lift.Asking $675obo 1 Edelbrock Performer vortec intake,bolted on but never ran.$100 New Comp .550 lift solid cam for SBC,no lifters,never ran.$50 1 Weiand x-celerator intake for BBC oval port,good shape.$50 Used Comp solid cam and lifters for BBC,.595/.595 lift,perfect condition,went to a smaller hydraulic cam,$100 .60 over Spreed Pro forged pistons for 454 BBC,with HD truck rods,.580 dome with Hyper-Flex rings,great condition,ready to run.$300 Used TH350c (lockup) trans for chevy,worked great when I pulled it,only been out a week or so.$100 Fresh .30 over 350 two bolt block,tanked,new freeze plugs/cam bearings,ready to assemble.$200. I'm new to shipping stuff,but I can do it. email at bloertcher@aol.com

01-03-2005, 04:52 PM	#3
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	New Comp .550 lift solid cam for SBC,no lifters,never ran.$50 PM sent __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

01-12-2005, 03:45 AM	#15
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Wow, I don't think I want nothing off you either. I was gonna see what you got left but F*** it, __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

01-03-2005, 02:52 PM	#2
dons454s Registered User Join Date: Nov 2004 Location: Claysburg, Pa Posts: 408	Sent email on the bbc intake

01-03-2005, 05:01 PM	#4
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	is the Performer Vortec intake square bore or spread bore? (Holley/AFB or QJet?) if its spread bore, i'll take it.

01-04-2005, 07:00 PM	#5
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	???

01-07-2005, 05:04 PM	#6
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	did you forget about me?

01-09-2005, 12:17 AM	#7
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	Ttt

01-09-2005, 01:47 AM	#8
dons454s Registered User Join Date: Nov 2004 Location: Claysburg, Pa Posts: 408	Not sure what happened I am still waiting on my total too. Does any one know how to get ahold of him other than email??? Don

01-10-2005, 10:12 PM	#9
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	forget it, the guy cant even answer and IM, or an email. must not want to sell his parts too bad.

01-11-2005, 12:33 AM	#10
dons454s Registered User Join Date: Nov 2004 Location: Claysburg, Pa Posts: 408	Glad we didnt pay him

01-11-2005, 12:38 AM	#11
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	no doubt.

01-11-2005, 04:28 AM	#12
bloertcher Registered User Join Date: Jul 2003 Location: Springfield,Mo. Posts: 305	Sorry fellas,computer down for a few days.Not starving,never asked either of you for a dime.Glad to know I'm the only one who's ever had PC trouble,God knows it's a rare occourence.



Register or Log In To remove these advertisements.

01-12-2005, 02:39 AM	#14
bloertcher Registered User Join Date: Jul 2003 Location: Springfield,Mo. Posts: 305	Whatever ya think,pal.Pc went down Friday,couldn't get it fixed til Monday evening.You don't want the intake,I don't want anything from you,let it go at that.

01-12-2005, 04:39 AM	#16
bloertcher Registered User Join Date: Jul 2003 Location: Springfield,Mo. Posts: 305	Let's get this straight.Did I ask one of you for a dime?If I'm so crooked,why didn't I just pop up with a phony shipping quote,get your money,and then "dissapear"?My daughter was sick last week,and my computer crashed.I could give two **s if you believe me or not.Hoods69,you can yourself.You know no details,and assume you do.I offered some deals,and had alot going soon after.Yes,I was trying to get some stuff together for fastc10 and dond454.My apologies for not doing so immediately.But my daughter is MUCH more important to me than ANYONE on this board.Got all the shipping info on Friday afternoon,crash Friday evening.In the meantime,people start talking ,my name is smeared because I don't operate a next-day parts warehouse.Again,if I'm so dishonest,WHY DIDN'T I ASK FOR PAYMENT?If you fellas don't want to buy stuff,that's fine,they aren't eating anything.But unless anyone was involved in this misunderstanding,they really have no right to talk **,do they?

01-12-2005, 05:52 PM	#17
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	i was told that you'd have a shipping quote on Wednesday, via IM. you never followed through with that for almost a week. you never answered any of the IMs i sent you, or posts in this thread, although you were in fact online. that's one thing you didnt follow through on. then when you finally do respond, you come up with an obvious BS excuse of computer troubles. if your computer was that broke, why were you online? then, suddenly this morning the difficulties you had in the past week change from computer troubles, to your daughter's illness. i for one am not buying it, if she was really sick why didnt you just say so in the begining? i'm just looking out for myself and my fellow board members. last i checked, dishonest people didnt turn honest when you put money in their pockets. and on that note, i am done with this post.

01-12-2005, 10:53 PM	#18
*Liz* Catchy title goes here.. Join Date: Mar 2002 Location: Rockwell, NC Posts: 39,737	next time take it to PM or STFU.............. closed

Register or Log In To remove these advertisements.