What are these parts worth? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972 · 01-03-2005, 04:46 AM

I just need to know a fair asking price for these parts.

Parts are from a 1972 C10.

1) Complete front crossmember with a-arms, coils, spindles, calipers, and rotors?

2) Complete coil spring rear end (5 lug, 3.08 or 3.07 open diff.), coils, crossmembers, panhard, and trailing arms (some rust between them)?

68LSS1 · 01-03-2005, 05:14 AM

Unless you can find someone local who wants them, nothing. Shipping would kill any worth. I couldn't give away my front suspension (cross member, converted 5 lug disc, dropped spindles, less than 3k on tie rods, ball joints, etc.). Someone may want the stuff to do a disc brake conversion. Same thing with the stock rear end (new bearings, ring and pinion, dropped springs, etc.). If the trailing arms are good someone will probably want those. I'd post a ad but I'd be willing to separate and get rid of what I could. I was hoping to recoup some of the money on the new front and rear suspension but it didn't happen. Sorry I couldn't give you better news but maybe someone here will prove me wrong? Hint, hint.

Blue Beard · 01-03-2005, 08:58 AM

Have to agree, it would cost way to much to arrive here....

Shouldn't have a problem selling or trading them..

67ChevyRedneck · 01-03-2005, 09:34 AM

I paid $125 for a complete front crossmember/disk set-up with the power booster and lines. I also got a couple little odds and ends that the 'yard owner threw in. I've seen rear-ends as cheap as 75 bucks and as high as 250 for these trucks... jmo

LONGHAIR · 01-03-2005, 10:11 AM

RON WOODGEARD · 01-03-2005, 10:19 AM

He hasn't said it was for sale to highest bidder, or even that it's for sale... He's doing as the Guidelines suggest.
I. All for sale or trade ads must include the price. If you do not know the price of the item(s) you are selling, then you should do some research. Absolutely no auctions or bids.

He's doing the research to see what is fair Market Value.. The guy wants as much as the Market Allows, but doesn't want to price his stuff out of the reasonable price range..

Moderators, Please correct me if i'm wrong !!!!!

Tx Firefighter · 01-03-2005, 10:38 AM

Longhair, this guy is no different than every other guy asking value of his truck. No sense jumping on him.

1972, that stuff isn't junk. In this area, you might get 100 bucks for the front suspension. I'd gladly buy the rearend if it was local. That's a 200 dollar rearend around here. Texas is full of long highways where we drive fast and 3.07 ratio 5 luggers are great to have.

1972 · 01-03-2005, 03:40 PM

Thanks for the info guys. I have a 1972 C10 that I am wanting to covert to a 4x4. The reason I was asking what the parts are worth is to see if it would be worth saving and selling/giving away any of them. If they were junk and useless I would just torch them out and throw them away and save myself the time and hassle of grinding rivets and advertising junk. Since you guys say that they are somewhat worth something I will save them to sell or give away.

Thanks again.

robert wright · 01-03-2005, 04:31 PM

1972-- your parts are what any of us could be interested if we saw it locally. To get a reasonable price, I usually call the junk yard and see what they would want for the same item. Should be able to get a good idea for the rear, maybe an approximation for the front. I see the rears for around $2-250. I wouldn't throw the front away....wait for a local swap meet and see what you can trade for. My 70 chevy craves your disc setup right now; just a matter of the right person at the right time.

Brainchild · 01-03-2005, 04:35 PM

Don't throw anything like that away,shoot trade it for a dog to guard the truck if noting else

Florida Mike · 01-05-2005, 10:03 PM

[QUOTE=68LSS1]Unless you can find someone local who wants them, nothing. Shipping would kill any worth. I couldn't give away my front suspension (cross member, converted 5 lug disc, dropped spindles, less than 3k on tie rods, ball joints, etc.). Someone may want the stuff to do a disc brake conversion.

You dont still have any of those parts you couldnt give away do ya?
mike

68LSS1 · 01-06-2005, 03:58 AM

Florida Mike, I gave it all to Ed @ Mothertruckers (link in sig) in hopes it wouldn't go to waste. I tried selling it but during last year I just got tired of it being in the way and took it down to him.

Florida Mike · 01-06-2005, 07:46 PM

Figured it wouldn't hurt to ask when your that close!
mike

01-03-2005, 04:46 AM	#1
1972 Majician Join Date: Nov 2004 Location: In the Middle Posts: 329	What are these parts worth? I just need to know a fair asking price for these parts. Parts are from a 1972 C10. 1) Complete front crossmember with a-arms, coils, spindles, calipers, and rotors? 2) Complete coil spring rear end (5 lug, 3.08 or 3.07 open diff.), coils, crossmembers, panhard, and trailing arms (some rust between them)?

01-03-2005, 05:14 AM	#2
68LSS1 Registered User Join Date: Dec 2002 Location: Tampa Posts: 1,191	Unless you can find someone local who wants them, nothing. Shipping would kill any worth. I couldn't give away my front suspension (cross member, converted 5 lug disc, dropped spindles, less than 3k on tie rods, ball joints, etc.). Someone may want the stuff to do a disc brake conversion. Same thing with the stock rear end (new bearings, ring and pinion, dropped springs, etc.). If the trailing arms are good someone will probably want those. I'd post a ad but I'd be willing to separate and get rid of what I could. I was hoping to recoup some of the money on the new front and rear suspension but it didn't happen. Sorry I couldn't give you better news but maybe someone here will prove me wrong? Hint, hint. __________________ '68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc

01-03-2005, 08:58 AM	#3
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Have to agree, it would cost way to much to arrive here.... Shouldn't have a problem selling or trading them.. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-03-2005, 09:34 AM	#4
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	I paid $125 for a complete front crossmember/disk set-up with the power booster and lines. I also got a couple little odds and ends that the 'yard owner threw in. I've seen rear-ends as cheap as 75 bucks and as high as 250 for these trucks... jmo __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

01-03-2005, 10:11 AM	#5
LONGHAIR just can't cover up my redneck Join Date: May 2004 Location: Columbus OH Posts: 11,414	Last edited by Tx Firefighter; 01-03-2005 at 10:39 AM.

01-03-2005, 10:19 AM	#6
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	He hasn't said it was for sale to highest bidder, or even that it's for sale... He's doing as the Guidelines suggest. I. All for sale or trade ads must include the price. If you do not know the price of the item(s) you are selling, then you should do some research. Absolutely no auctions or bids. He's doing the research to see what is fair Market Value.. The guy wants as much as the Market Allows, but doesn't want to price his stuff out of the reasonable price range.. Moderators, Please correct me if i'm wrong !!!!!

01-03-2005, 10:38 AM	#7
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Longhair, this guy is no different than every other guy asking value of his truck. No sense jumping on him. 1972, that stuff isn't junk. In this area, you might get 100 bucks for the front suspension. I'd gladly buy the rearend if it was local. That's a 200 dollar rearend around here. Texas is full of long highways where we drive fast and 3.07 ratio 5 luggers are great to have. __________________ I'm on the Instagram- @Gearhead_Kevin

01-03-2005, 03:40 PM	#8
1972 Majician Join Date: Nov 2004 Location: In the Middle Posts: 329	Thanks for the info guys. I have a 1972 C10 that I am wanting to covert to a 4x4. The reason I was asking what the parts are worth is to see if it would be worth saving and selling/giving away any of them. If they were junk and useless I would just torch them out and throw them away and save myself the time and hassle of grinding rivets and advertising junk. Since you guys say that they are somewhat worth something I will save them to sell or give away. Thanks again.

01-03-2005, 04:31 PM	#9
robert wright Registered User Join Date: Dec 2004 Location: Anch. Ak Posts: 50	1972-- your parts are what any of us could be interested if we saw it locally. To get a reasonable price, I usually call the junk yard and see what they would want for the same item. Should be able to get a good idea for the rear, maybe an approximation for the front. I see the rears for around $2-250. I wouldn't throw the front away....wait for a local swap meet and see what you can trade for. My 70 chevy craves your disc setup right now; just a matter of the right person at the right time. __________________ bw 70 chev short/fleet:son's hotrod w/tickets to prove it 69 gmc short/step: project in pieces 87 chev short/step: still thinking about 2000 gmc xcab/step: daily driver

01-03-2005, 04:35 PM	#10
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	Don't throw anything like that away,shoot trade it for a dog to guard the truck if noting else __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

01-05-2005, 10:03 PM	#11
Florida Mike Registered User Join Date: Jul 2004 Location: Seffner, Florida Posts: 88	[QUOTE=68LSS1]Unless you can find someone local who wants them, nothing. Shipping would kill any worth. I couldn't give away my front suspension (cross member, converted 5 lug disc, dropped spindles, less than 3k on tie rods, ball joints, etc.). Someone may want the stuff to do a disc brake conversion. You dont still have any of those parts you couldnt give away do ya? mike

01-06-2005, 03:58 AM	#12
68LSS1 Registered User Join Date: Dec 2002 Location: Tampa Posts: 1,191	Florida Mike, I gave it all to Ed @ Mothertruckers (link in sig) in hopes it wouldn't go to waste. I tried selling it but during last year I just got tired of it being in the way and took it down to him. __________________ '68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc

01-06-2005, 07:46 PM	#13
Florida Mike Registered User Join Date: Jul 2004 Location: Seffner, Florida Posts: 88	Figured it wouldn't hurt to ask when your that close! mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.