'73-'79 factory bucket seat brackets wanted...truck or suburban...not blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

superchevy · 01-03-2005, 09:41 AM

yeah, I know this is 67-72 parts board, but more exposure here.
Just like it says, I need driver's and passenger bucket seat mounting brackets from a '73-'79 truck or suburban, not blazer.
If you have a set or one side only, please pm me.
Thanks,
SC

cheyenne10 · 01-03-2005, 11:13 AM

Not sure what they look like compared to 69-72's. Any pics? Some of us have sets of brackets and may not know what they fit.

superchevy · 01-03-2005, 12:26 PM

No, no pics. According to my factory '77 manual, the truck/sub bucket brackets are different than the Blazer brackets...the Blazer floor is flatter, thus the brackets for same are higher than the truck brackets.
There's a pic in the manual, but I don't have a way to scan it in.
SC

bigblock73 · 01-03-2005, 01:48 PM

The brackets in question have a kick up on the rear outside corners so they can sit on top of the "shelf" the 73-87's have across the back of the cab. Also, only the drivers side is adjustable, the pass is fixed in place. This may help identify them a little.

badpeanut · 01-03-2005, 03:00 PM

I no longer have these brackets, but they were from a mid-'70s suburban with buckets (both sides were adjustable). Good luck!

bigblock73 · 01-03-2005, 03:03 PM

OK, I guess that proves the PU brackets are unique to themselves. Those brackets are not the same as PU brackets and therefore will not fit a PU either.

Bob Moore · 01-03-2005, 03:18 PM

The pickups with buckets also have welded to the floorboard a mounting bracket for the inboard rail on both seats.

superchevy · 01-03-2005, 06:08 PM

badpeanut, those are the brackets I need. They are exactly like the ones in the manual I have, except the truck passenger bucket in the manual doesn't adjust. Would be sweet to have both sides adjust.
OK, so who has a set of mid-70's suburban bucket seat brackets?
Geez, these are being difficult to find.
SC

tom hand · 01-03-2005, 07:12 PM

I have 4 of them....the part marked in red is missing on two of them and broken on the other two. The part itself is just sheetmetal and would be easy to make. You can have them for the shipping. Email me if interested...thand1@midsouth.rr.com

superchevy · 01-03-2005, 07:48 PM

Sweet!
Email sent!
Thanks,
SC

Prof · 01-04-2005, 11:44 AM

I have a set for both seats. I would like to trade them for a set of 69-72 bucket brackets, (preferably pickup). Mike.

01-03-2005, 09:41 AM	#1
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	'73-'79 factory bucket seat brackets wanted...truck or suburban...not blazer yeah, I know this is 67-72 parts board, but more exposure here. Just like it says, I need driver's and passenger bucket seat mounting brackets from a '73-'79 truck or suburban, not blazer. If you have a set or one side only, please pm me. Thanks, SC __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

01-03-2005, 11:13 AM	#2
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	pics Not sure what they look like compared to 69-72's. Any pics? Some of us have sets of brackets and may not know what they fit. __________________ Bob

01-03-2005, 12:26 PM	#3
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	No, no pics. According to my factory '77 manual, the truck/sub bucket brackets are different than the Blazer brackets...the Blazer floor is flatter, thus the brackets for same are higher than the truck brackets. There's a pic in the manual, but I don't have a way to scan it in. SC __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

01-03-2005, 01:48 PM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	The brackets in question have a kick up on the rear outside corners so they can sit on top of the "shelf" the 73-87's have across the back of the cab. Also, only the drivers side is adjustable, the pass is fixed in place. This may help identify them a little. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-03-2005, 03:00 PM	#5
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	I no longer have these brackets, but they were from a mid-'70s suburban with buckets (both sides were adjustable). Good luck! Attached Images

01-03-2005, 03:03 PM	#6
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	OK, I guess that proves the PU brackets are unique to themselves. Those brackets are not the same as PU brackets and therefore will not fit a PU either. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-03-2005, 03:18 PM	#7
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Bucket seat brackets The pickups with buckets also have welded to the floorboard a mounting bracket for the inboard rail on both seats. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

01-03-2005, 06:08 PM	#8
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	badpeanut, those are the brackets I need. They are exactly like the ones in the manual I have, except the truck passenger bucket in the manual doesn't adjust. Would be sweet to have both sides adjust. OK, so who has a set of mid-70's suburban bucket seat brackets? Geez, these are being difficult to find. SC __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

01-03-2005, 07:12 PM	#9
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	I have 4 of them....the part marked in red is missing on two of them and broken on the other two. The part itself is just sheetmetal and would be easy to make. You can have them for the shipping. Email me if interested...thand1@midsouth.rr.com Attached Images __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

01-03-2005, 07:48 PM	#10
superchevy Got big-block? Join Date: Jul 2000 Location: Austin, Texas Posts: 2,453	Sweet! Email sent! Thanks, SC __________________ '68 CST SWB factory 396/T400 buddy buckets, a/c, ps, pb '72 Corvette convertible 454/4spd/ac, ps, pb '73 GMC Sierra Grande short wide 454/T400 ps, pb, ac '77 K5 Blazer black on red, 350/T350/NP205 ps, pb, ac all original '78 GMC Sierra Classic short wide 454/T400 ps, pb, ac '72 GMC Sprint SP454. 1 of 38 built. '73 GMC Sprint SP454. 1 of 71 built. '75 GMC Sprint SP454. 1 of 25 built. SOLD! '72 GMC K25 4x4 468/4L80e/NP205 build thread http://67-72chevytrucks.com/vboard/s...23#post4324423 SOLD!'55 Chevy gasser 496/4spd build thread http://67-72chevytrucks.com/vboard/s...96#post4324396

01-04-2005, 11:44 AM	#11
Prof Registered User Join Date: Sep 2002 Location: Winnipeg Canada Posts: 135	seat brackets I have a set for both seats. I would like to trade them for a set of 69-72 bucket brackets, (preferably pickup). Mike.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.