Wanted: I'm rebuilding my 350sb. Anyone got stuff to help? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Hot Rod Willy* · 01-03-2005, 07:42 PM

rebuilding 350 sb anyone got parts?

John39671 · 01-03-2005, 08:38 PM

I have a whole machine shop full, what do you need?

*1FaastC10* · 01-03-2005, 09:06 PM

exactly, you're WAY too vague on what you want. do you want to the grocery store? or do you want to give Warren Johnson a run for his money?

*Hot Rod Willy* · 01-03-2005, 10:51 PM

i need rings, gaskets, etc. motor runs but it needs a rebuild i think... been sitting really long.

bluex · 01-04-2005, 01:00 AM

I got a set of .040 silv-o-lite pistons and rods if you want'em. $125+ the ride.

Paul

*Hot Rod Willy* · 01-04-2005, 01:06 AM

i got good pist. rods

benscool1 · 01-04-2005, 01:35 AM

A fel-pro gasket set is like $35 + like $9 shipping last time I checked on ebay. Your not gonna find a set cheaper than that, unless you go to summit or something.

John39671 · 01-04-2005, 12:27 PM

I have a set of heads that were just rebuilt last week for sale if you need any. Casting # is 3973487X, they originally came off of a 71-72 SS camaro/chevelle. We put new hardened seats in the exh, they have been surfaced for flat, maged, new valves on both sides, intakes have a stainless swirl finish, new springs that are good for a .550 lift cam. If you are interested let me know.

John39671 · 01-04-2005, 12:29 PM

Numbers can be vereified at www.mortec.com

01-03-2005, 07:42 PM	#1
Hot Rod Willy No longer a Member Join Date: Dec 2004 Location: Oklahoma Posts: 130	Wanted: I'm rebuilding my 350sb. Anyone got stuff to help? rebuilding 350 sb anyone got parts?

01-04-2005, 01:00 AM	#5
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	I got a set of .040 silv-o-lite pistons and rods if you want'em. $125+ the ride. Paul __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

01-04-2005, 01:35 AM	#7
benscool1 Registered User Join Date: Mar 2003 Location: Williamsfield, IL Posts: 781	A fel-pro gasket set is like $35 + like $9 shipping last time I checked on ebay. Your not gonna find a set cheaper than that, unless you go to summit or something. __________________ Ben 84 C10 Silverado 14 Silverado Z71

01-03-2005, 08:38 PM	#2
John39671 Registered User Join Date: Oct 2004 Location: Baker City,Oregon Posts: 278	I have a whole machine shop full, what do you need?

01-03-2005, 09:06 PM	#3
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	exactly, you're WAY too vague on what you want. do you want to the grocery store? or do you want to give Warren Johnson a run for his money?

01-03-2005, 10:51 PM	#4
Hot Rod Willy No longer a Member Join Date: Dec 2004 Location: Oklahoma Posts: 130	i need rings, gaskets, etc. motor runs but it needs a rebuild i think... been sitting really long.

01-04-2005, 01:06 AM	#6
Hot Rod Willy No longer a Member Join Date: Dec 2004 Location: Oklahoma Posts: 130	i got good pist. rods

01-04-2005, 12:27 PM	#8
John39671 Registered User Join Date: Oct 2004 Location: Baker City,Oregon Posts: 278	I have a set of heads that were just rebuilt last week for sale if you need any. Casting # is 3973487X, they originally came off of a 71-72 SS camaro/chevelle. We put new hardened seats in the exh, they have been surfaced for flat, maged, new valves on both sides, intakes have a stainless swirl finish, new springs that are good for a .550 lift cam. If you are interested let me know.

01-04-2005, 12:29 PM	#9
John39671 Registered User Join Date: Oct 2004 Location: Baker City,Oregon Posts: 278	Numbers can be vereified at www.mortec.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.