question on hei install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dyingdeadman · 01-05-2005, 03:45 AM

I was wanting to do the hei conversion on my 72 with a 402 big block but am a little unsure as to which hei dist to get or will work. I was checking my local parts store online and found this one that says will work for a 75 gmc with a 454 so would it work for my application?

the link didnt work right but the dist i was looking at is a accel part # 59107
it is on advance auto parts web site
also what all do I need for the conversion. i know i will need some wire and an inline fuse and new plug wires. but do i need anything else.

01-05-2005, 03:45 AM	#1
dyingdeadman Registered User Join Date: Aug 2004 Location: san marcos,tx Posts: 266	question on hei install I was wanting to do the hei conversion on my 72 with a 402 big block but am a little unsure as to which hei dist to get or will work. I was checking my local parts store online and found this one that says will work for a 75 gmc with a 454 so would it work for my application? the link didnt work right but the dist i was looking at is a accel part # 59107 it is on advance auto parts web site also what all do I need for the conversion. i know i will need some wire and an inline fuse and new plug wires. but do i need anything else. __________________ 72 GMC sierra 3/4 ton 402 bb 68 GMC 3/4 ton 2010 camaro rs: daily driver Last edited by dyingdeadman; 01-05-2005 at 04:18 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.