Still need clutch rod - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1970 CST Short Wide** · 01-07-2005, 11:13 AM

I'm still looking for a clutch rod for my sons truck. Its the rod from the pedal to the Z bar and has a bend to it. His wont last much longer, Anybody have one ????

Thanks
Steve

**1970 CST Short Wide** · 01-07-2005, 01:39 PM

ttt

matt67350 · 01-07-2005, 01:42 PM

Get me that address. I'll send what I have.

*Tanker350* · 01-07-2005, 02:03 PM

http://cgi.ebay.com/ebaymotors/ws/eB...945270487&rd=1

RON WOODGEARD · 01-07-2005, 02:19 PM

Steve,

Can you send me or post a picture of what you need, I may have it. I bought all ( I think ) of the linkage to do the switch over from Auto to Stick, but right now I am not going to do it.

Ron

**1970 CST Short Wide** · 01-07-2005, 02:39 PM

I'll see if I can get a pic tonight. Its not straight looking like the one Tanker350 posted in the E-Bay add. It comes out of the cab straight and round then makes a bend to the left (driver side) and goes to flate bar and links to the Z Bar
Thanks

Robert1970C20rstbukt · 01-07-2005, 04:12 PM

Here's a NOS one on ebay, I think this is what you want:

http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

**1970 CST Short Wide** · 01-07-2005, 04:31 PM

Thanks, I'm askin g the E-Bay guy about the lenght because it says it fits "Chevy Series 20 through 30 Double Duty truck " It doesnt look like whats in theer now
Thanks

matt67350 · 01-07-2005, 04:53 PM

1970 CST, I'll ship the parts.
Just make a donation to the message board.

**1970 CST Short Wide** · 01-07-2005, 05:32 PM

Matt6735: That sounds Great. Would you have a pic of the rod so I could see if its what I'm looking for? I'd hate to have you send something I cant use. I tryed to discribe it the best I could a couple post's up

Thanks
Steve

jmanz69 · 01-07-2005, 07:23 PM

The one you are looking for is a standard rod for the manual trans trucks. Any 1/2 or 3/4 ton truck will have the right one. In a pinch, you could take the one you have and hit the worn area with a welder to fill it in, then grind it back round. It will hold for a while til you can find a replacement. I just gave away a decent one. I'll look if I have another.

**1970 CST Short Wide** · 01-07-2005, 08:05 PM

Notice how it curves and is flat

jmanz69 · 01-07-2005, 08:10 PM

Here is a better pic.

matt67350 · 01-07-2005, 08:26 PM

I will check to see what I have.

Thanks
Matthew

**1970 CST Short Wide** · 01-08-2005, 12:05 PM

ttt

**FRENCHBLUE72** · 01-08-2005, 12:34 PM

I have one of those..... Hows 15$ to you door just pm me your addy.

**1970 CST Short Wide** · 01-08-2005, 02:57 PM

Thanks FrenchBlue, I'll take it. PM sent

matt67350 · 01-08-2005, 06:58 PM

Do you still need the pic's of the rod?

01-07-2005, 11:13 AM	#1
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,111	Still need clutch rod I'm still looking for a clutch rod for my sons truck. Its the rod from the pedal to the Z bar and has a bend to it. His wont last much longer, Anybody have one ???? Thanks Steve __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

01-07-2005, 01:39 PM	#2
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,111	ttt __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

01-07-2005, 01:42 PM	#3
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	Get me that address. I'll send what I have. __________________ 69 swb stepside, rebuild and upgrade in progress

01-07-2005, 02:39 PM	#6
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,111	I'll see if I can get a pic tonight. Its not straight looking like the one Tanker350 posted in the E-Bay add. It comes out of the cab straight and round then makes a bend to the left (driver side) and goes to flate bar and links to the Z Bar Thanks __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

01-07-2005, 04:12 PM	#7
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Here's a NOS one on ebay, I think this is what you want: http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

01-07-2005, 02:03 PM	#4
Tanker350 Account Suspended Join Date: Dec 2003 Location: Palm Desert, Ca Posts: 410	http://cgi.ebay.com/ebaymotors/ws/eB...945270487&rd=1

01-07-2005, 02:19 PM	#5
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	Steve, Can you send me or post a picture of what you need, I may have it. I bought all ( I think ) of the linkage to do the switch over from Auto to Stick, but right now I am not going to do it. Ron

01-07-2005, 04:31 PM	#8
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,111	Thanks, I'm askin g the E-Bay guy about the lenght because it says it fits "Chevy Series 20 through 30 Double Duty truck " It doesnt look like whats in theer now Thanks __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

01-07-2005, 04:53 PM	#9
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	1970 CST, I'll ship the parts. Just make a donation to the message board. __________________ 69 swb stepside, rebuild and upgrade in progress

01-07-2005, 05:32 PM	#10
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,111	Matt6735: That sounds Great. Would you have a pic of the rod so I could see if its what I'm looking for? I'd hate to have you send something I cant use. I tryed to discribe it the best I could a couple post's up Thanks Steve __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

01-07-2005, 07:23 PM	#11
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	The one you are looking for is a standard rod for the manual trans trucks. Any 1/2 or 3/4 ton truck will have the right one. In a pinch, you could take the one you have and hit the worn area with a welder to fill it in, then grind it back round. It will hold for a while til you can find a replacement. I just gave away a decent one. I'll look if I have another.

01-07-2005, 08:05 PM	#12
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,111	Here is what IO have Notice how it curves and is flat Attached Images __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

01-07-2005, 08:10 PM	#13
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	Here is a better pic. Attached Images

01-07-2005, 08:26 PM	#14
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	I will check to see what I have. Thanks Matthew __________________ 69 swb stepside, rebuild and upgrade in progress

01-08-2005, 12:05 PM	#15
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,111	ttt __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565



Register or Log In To remove these advertisements.

01-08-2005, 12:34 PM	#16
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	I have one of those..... Hows 15$ to you door just pm me your addy. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-08-2005, 02:57 PM	#17
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,111	Thanks FrenchBlue, I'll take it. PM sent __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

01-08-2005, 06:58 PM	#18
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	Do you still need the pic's of the rod? __________________ 69 swb stepside, rebuild and upgrade in progress

Register or Log In To remove these advertisements.