WTB:Truck Bucket Seat Brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 01-15-2005, 12:09 PM

Any of you parts guys sittin`on a set of truck bucket seat brackets?Also,I would like to know what`s different about the Blazer brackets,other than the pass.side flip-up feature.

HuggerCST · 01-15-2005, 10:55 PM

The driver's side brackets are the same as blazer brackets. Original stationary passenger side truck brackets are hard to find, but are available aftermarket. See Big Orange's post if you haven't already seen it.

**special-K** · 01-16-2005, 10:42 AM

Thanks for clearing that up,HuggerCST.I thought the floors were the same.Couldn`t see were the difference would lie.I`m onto Big Orange`s pieces.

Rod · 01-16-2005, 12:02 PM

Pic here of truck bucket seat brackets 69-72..also the bracket on the left is a regular seat bracket...its there, so note the difference on how it attches ...regular seat brackets bolt on front and rear while truck buckets bolt to the seat on the edges.

Rod · 01-16-2005, 12:15 PM

And here are the blazer seat brackets pic...you can see the drivers side brackets are same from truck to blazer in the 69-72 era with the condition that the blazer brackets are the regular type and not the auxilary metal back type.

Rod · 01-16-2005, 12:22 PM

Well had the pic of bucket seat auxilary metal back brackets too..might as well post them to...then I'll never have to answer the question again...lol..not likely.

01-15-2005, 12:09 PM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	WTB:Truck Bucket Seat Brackets Any of you parts guys sittin`on a set of truck bucket seat brackets?Also,I would like to know what`s different about the Blazer brackets,other than the pass.side flip-up feature. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 01-15-2005 at 12:10 PM. Reason: misprint

01-15-2005, 10:55 PM	#2
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	The driver's side brackets are the same as blazer brackets. Original stationary passenger side truck brackets are hard to find, but are available aftermarket. See Big Orange's post if you haven't already seen it. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-16-2005, 10:42 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Thanks for clearing that up,HuggerCST.I thought the floors were the same.Couldn`t see were the difference would lie.I`m onto Big Orange`s pieces. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-16-2005, 12:02 PM	#4
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Pic here of truck bucket seat brackets 69-72..also the bracket on the left is a regular seat bracket...its there, so note the difference on how it attches ...regular seat brackets bolt on front and rear while truck buckets bolt to the seat on the edges. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

01-16-2005, 12:15 PM	#5
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	And here are the blazer seat brackets pic...you can see the drivers side brackets are same from truck to blazer in the 69-72 era with the condition that the blazer brackets are the regular type and not the auxilary metal back type. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

01-16-2005, 12:22 PM	#6
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Well had the pic of bucket seat auxilary metal back brackets too..might as well post them to...then I'll never have to answer the question again...lol..not likely. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.