Newby looking for Cab (KY) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jtmiller92 · 01-16-2005, 12:10 AM

Hey, I am new to this site but just picked up a 72 SWB Chevy Truck. Its in ruff shape but the frame is solid and it runs.(paid a $100 for it) In the next few weeks I will probably bug you all to death with questions. As of right now my top priority is to find a good cab, my current one is full of cancer. I am located in Nicholasville, KY 40356 but am willing to travel a few hours or pay shipping for a good solid cab. Doesnt matter much to me if its AC or non AC, not looking for a cab with running lights on the top. If it needs a little work its fine too, such as new rockers, cab corner etc.

phantom dually · 01-16-2005, 12:14 AM

Welcome to the board. Im in Louisville!! Dont have a cab but thought I would say hey!!

Blue_71 · 01-16-2005, 11:19 AM

i have a fixable cab, but i dont know how interested youd be in it... it does need some work, like both front floor pans, rockers, and floor supports... it may need cab corners but im not sure. do you want me to get some pics for you?
Josh

Blue Beard · 01-16-2005, 12:06 PM

Welcome to the board from SW Washington State...

jtmiller92 · 01-16-2005, 01:10 PM

Thanks for the warm welcome guys. Blue 71 if its not too much trouble could you get me some pics. Where are you located in reference to Lexington, ky? The cab on my truck is completely shot so anything would be a better starting point. What are you looking to get for it?

CHEVYE · 01-16-2005, 01:14 PM

gutterman and raggedjim are around murray, ky. i bet one of them could find you a cab. welcome from 2 miles over the tenn. border!

Blue_71 · 01-16-2005, 02:26 PM

with the shape its in, i'll let it go for $100 obo.... i dont have the title to it, but im going to cut out around the vin section so you can cut out around yours and weld it in. i'll deliver it for $40 load up fee (because i'd have to borrow my neighbors tractor) and 50 cents a mile.... if you DO want to come get it though, i'd borrow it and load it for no extra since you would be making the trip. im around a hour from lexington (100 miles south of louisville on I-65) it does need alot of work, but it is defintly fixable if you know how to weld. i'll go get some pics of it in a few minutes

Blue_71 · 01-16-2005, 03:38 PM

heres the pics-- go to this link

http://67-72chevytrucks.com/vboard/s....php3?t=136176

LUV2XCLR8 · 01-16-2005, 03:42 PM

WELCOME 2 THE BOARD FROM WEST 10-UH-C

gutterman01 · 01-16-2005, 04:48 PM

I have a 71 cab with doors,glass and title doors are pretty decent cab needs supports and some spots in the floor cab corners and rockers are fairly solid 200.00 and you come get it still has factory radio and good dash pad I will post pics later if your interested

jtmiller92 · 01-16-2005, 06:05 PM

Thanks for the pics Blue 71, i think its alittle rougher than what I want to start with though. Hope I didnt cost you to much time, or frostbite in the cold.

Gutterman01, I would appreciate some pics if you have the time. I dont want to put anyone out or feel like I'm waisting your time. I have cash for the right cab and have access to a friends truck and trailer.

*bisquik65* · 01-16-2005, 06:57 PM

Welcome aboard from westen n.c. 4 miles from the tn line. I have a 67 small window cab f/s on this board. For $250.

jtmiller92 · 01-17-2005, 10:55 AM

Thanks bisquik65 but I think I will stick with the large window cab style. I may have found the cab I need but am still interested in what else is out there. Let me know what you have...........................jt

Big J · 01-17-2005, 12:10 PM

Welcome to the board! I might know were one is. I'll ask and have him pm ya.

KY Wildcat Phan · 01-17-2005, 12:53 PM

Welcome to board from Richmond!!!!!!!!!!!!

jtmiller92 · 01-17-2005, 01:01 PM

Thanks Big J, let me know if you find out. KY Wildcat Phan your not to far away from me. I spent some time in Richmond for the Police Academy there at EKU. Dont hold that against me though.

01-16-2005, 12:10 AM	#1
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	Newby looking for Cab (KY) Hey, I am new to this site but just picked up a 72 SWB Chevy Truck. Its in ruff shape but the frame is solid and it runs.(paid a $100 for it) In the next few weeks I will probably bug you all to death with questions. As of right now my top priority is to find a good cab, my current one is full of cancer. I am located in Nicholasville, KY 40356 but am willing to travel a few hours or pay shipping for a good solid cab. Doesnt matter much to me if its AC or non AC, not looking for a cab with running lights on the top. If it needs a little work its fine too, such as new rockers, cab corner etc.

01-16-2005, 12:14 AM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Welcome to the board. Im in Louisville!! Dont have a cab but thought I would say hey!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

01-16-2005, 12:06 PM	#4
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Welcome to the board from SW Washington State... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-16-2005, 01:14 PM	#6
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	gutterman and raggedjim are around murray, ky. i bet one of them could find you a cab. welcome from 2 miles over the tenn. border! __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-16-2005, 02:26 PM	#7
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,283	with the shape its in, i'll let it go for $100 obo.... i dont have the title to it, but im going to cut out around the vin section so you can cut out around yours and weld it in. i'll deliver it for $40 load up fee (because i'd have to borrow my neighbors tractor) and 50 cents a mile.... if you DO want to come get it though, i'd borrow it and load it for no extra since you would be making the trip. im around a hour from lexington (100 miles south of louisville on I-65) it does need alot of work, but it is defintly fixable if you know how to weld. i'll go get some pics of it in a few minutes Last edited by Blue_71; 01-16-2005 at 02:28 PM.

01-16-2005, 01:10 PM	#5
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	Thanks for the warm welcome guys. Blue 71 if its not too much trouble could you get me some pics. Where are you located in reference to Lexington, ky? The cab on my truck is completely shot so anything would be a better starting point. What are you looking to get for it?

01-16-2005, 03:38 PM	#8
Blue_71 Bloo Join Date: Feb 2001 Location: Barren County Kentucky Posts: 6,283	heres the pics-- go to this link http://67-72chevytrucks.com/vboard/s....php3?t=136176

01-16-2005, 03:42 PM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	WELCOME 2 THE BOARD FROM WEST 10-UH-C __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-16-2005, 04:48 PM	#10
gutterman01 Registered User Join Date: Sep 2003 Location: kentucky Posts: 240	I have a 71 cab with doors,glass and title doors are pretty decent cab needs supports and some spots in the floor cab corners and rockers are fairly solid 200.00 and you come get it still has factory radio and good dash pad I will post pics later if your interested

01-16-2005, 06:05 PM	#11
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	Thanks for the pics Blue 71, i think its alittle rougher than what I want to start with though. Hope I didnt cost you to much time, or frostbite in the cold. Gutterman01, I would appreciate some pics if you have the time. I dont want to put anyone out or feel like I'm waisting your time. I have cash for the right cab and have access to a friends truck and trailer.

01-16-2005, 06:57 PM	#12
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Welcome aboard from westen n.c. 4 miles from the tn line. I have a 67 small window cab f/s on this board. For $250.

01-17-2005, 10:55 AM	#13
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	Thanks bisquik65 but I think I will stick with the large window cab style. I may have found the cab I need but am still interested in what else is out there. Let me know what you have...........................jt __________________ 2011 Camaro 1SS LS3/6 Speed

01-17-2005, 12:10 PM	#14
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Welcome to the board! I might know were one is. I'll ask and have him pm ya. __________________ BAZINGA! My Build

01-17-2005, 12:53 PM	#15
KY Wildcat Phan Registered User Join Date: Oct 2004 Location: Richmond, KY Posts: 9	Welcome to board from Richmond!!!!!!!!!!!!

01-17-2005, 01:01 PM	#16
jtmiller92 Registered User Join Date: Jan 2005 Location: Nicholasville, KY 40356 Posts: 461	Thanks Big J, let me know if you find out. KY Wildcat Phan your not to far away from me. I spent some time in Richmond for the Police Academy there at EKU. Dont hold that against me though. __________________ 2011 Camaro 1SS LS3/6 Speed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.