ok i got a idea hmm - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy68388 · 04-22-2002, 10:37 PM

ok i have a juck ass 78 blazer witha 6 inch lift bad ass moter (350 bored .60 over) its a 1/2 ton so i play with it un till i see this much better looking 79 long bed gmc bad moter and has rust but the cab isnt coming throw like on my blazer but hes were it gets fun its 3/4 ton so will my lift work on it with no to little problems and i dont want to get new wheels so i was thinking of just swaping axles till i get more money to buy tires again and wheels tell me what u think

72chevyLWB · 04-24-2002, 12:09 PM

look it up in the catalog, I think they list both the 1/2 and 3/4 lifts as the same part #.

------------------
72 Chevy C/10
87 Chevy Silverado 4X4
www.geocities.com/chevylwb/chevylwb.html
Aberdeen South Dakota

Brett5 · 04-25-2002, 01:31 PM

The lift is the same between 1/2ton and 3/4ton and even 1ton for front. I took the lift out of my 1/2ton and put it on my one ton. The only thing you would have to buy would be wheels and tires, because you are going from a 6lug to a 8lug.
brett

chevy68388 · 04-25-2002, 08:47 PM

is there any rims that are 3/4 ton that are 15inch rims cause i have brandnew 35s that are for 15 inch rims

Big69C20 Toy · 04-26-2002, 11:55 AM

There are a few 15 rims for 3/4 ton but my tire dudes just told me that they are really rare now. I've got a set on my 3/4 ton at the moment, 15x7. He said now you can only get 16's or 16.5s for most of the 3/4 trucks.

------------------
69 Custom 20, 396BB,Longbed fleetside.
New Oak Bed With SS strips... damn nice.

Edelbrock performer RPM-O, Edelbrock 750Carb, Headers, HEI, 2 40" glasspacks.
Stereo: Classic-style tape deck/radio, 2 6x9 Cerwin Vega's in doors, 2 10" Neo subs under seats, 1 900 Watt amp.

SN= Ares220

**68SWB4x4** · 04-26-2002, 03:54 PM

you can get wagon wheels in 15" 8 lug

------------------
My Truck pictures

www.xframeimpala.com

68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET"
56 big window short stepside 235 dual 1 brls
64ImpalaSS 327
70 C10 LWB fleetside custom/10 350/TH350
IM me on aol SN= SHAGROLET

chevy68388 · 04-26-2002, 11:28 PM

im not looking for any showy rims just some that will work i got brand new 35s and now i got this truck and its 16.5 so u under stand why i dont care what they look like

diggin69 · 05-03-2002, 08:12 AM

You can put 15's on a 3/4 if you grindd some off the back caliper...... that would be up to you...... it does work but makes the wall on the caliper thin.....

Diggin 69

04-22-2002, 10:37 PM	#1
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	ok i got a idea hmm ok i have a juck ass 78 blazer witha 6 inch lift bad ass moter (350 bored .60 over) its a 1/2 ton so i play with it un till i see this much better looking 79 long bed gmc bad moter and has rust but the cab isnt coming throw like on my blazer but hes were it gets fun its 3/4 ton so will my lift work on it with no to little problems and i dont want to get new wheels so i was thinking of just swaping axles till i get more money to buy tires again and wheels tell me what u think __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

04-24-2002, 12:09 PM	#2
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	look it up in the catalog, I think they list both the 1/2 and 3/4 lifts as the same part #. ------------------ 72 Chevy C/10 87 Chevy Silverado 4X4 www.geocities.com/chevylwb/chevylwb.html Aberdeen South Dakota __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

04-25-2002, 08:47 PM	#4
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	is there any rims that are 3/4 ton that are 15inch rims cause i have brandnew 35s that are for 15 inch rims __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

04-26-2002, 11:55 AM	#5
Big69C20 Toy Livin' it up. Join Date: Nov 2001 Location: Richland, MI Posts: 2,212	There are a few 15 rims for 3/4 ton but my tire dudes just told me that they are really rare now. I've got a set on my 3/4 ton at the moment, 15x7. He said now you can only get 16's or 16.5s for most of the 3/4 trucks. ------------------ 69 Custom 20, 396BB,Longbed fleetside. New Oak Bed With SS strips... damn nice. Edelbrock performer RPM-O, Edelbrock 750Carb, Headers, HEI, 2 40" glasspacks. Stereo: Classic-style tape deck/radio, 2 6x9 Cerwin Vega's in doors, 2 10" Neo subs under seats, 1 900 Watt amp. SN= Ares220 __________________ -Greg; Sold the 69 C20. It's off to a better home with more love! Now onto the 86 CUCV M1009; K5 blazer with 6.2L diesel, corp 10 bolt axles, Detroit locker in the rear, trutrac front, 3.73 gears, 35" tires.

04-26-2002, 03:54 PM	#6
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	you can get wagon wheels in 15" 8 lug ------------------ My Truck pictures www.xframeimpala.com 68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET" 56 big window short stepside 235 dual 1 brls 64ImpalaSS 327 70 C10 LWB fleetside custom/10 350/TH350 IM me on aol SN= SHAGROLET __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

04-25-2002, 01:31 PM	#3
Brett5 Registered User Join Date: Apr 2002 Location: Pleasant Plain, Ohio, USA Posts: 2	The lift is the same between 1/2ton and 3/4ton and even 1ton for front. I took the lift out of my 1/2ton and put it on my one ton. The only thing you would have to buy would be wheels and tires, because you are going from a 6lug to a 8lug. brett

04-26-2002, 11:28 PM	#7
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	im not looking for any showy rims just some that will work i got brand new 35s and now i got this truck and its 16.5 so u under stand why i dont care what they look like __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

05-03-2002, 08:12 AM	#8
diggin69 Southern but in Ohio!!!! Join Date: Jan 2002 Location: Eaton,Oh. 45320 Posts: 467	You can put 15's on a 3/4 if you grindd some off the back caliper...... that would be up to you...... it does work but makes the wall on the caliper thin..... Diggin 69 __________________ 1969 C/10 3/4 ton 4x4 longbed custom, frame made from a 79 1972 custom-10 half/ton longbed 1980 1/2 ton 4x4 all original 350/350/205 with air Eaton,Oh rebelryder@hotmail.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.