Retiring 69' Chevy 4x4... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy_crusn · 01-18-2005, 06:59 PM

...most all the body panels have rust.
I'll be using the 350 engine in my Chevelle, but I plan on removing the drive train to make available before I have it hauled away. If anyone has a need for parts, let me know.

booth · 01-18-2005, 07:02 PM

Where are you located I'm just south of Minneapolis in New Market. I would be interested in seeing what you've got.
Thanks,
Paul

You've got a PM

chevy_crusn · 01-18-2005, 07:06 PM

Hi Paul,
I'm in St. Louis Park. I just got done taking it around the block one last time.

72 Cheyenne K20 · 01-18-2005, 07:10 PM

I'm interested also, live in Owatonna, work in Burnsville and Apple Valley. Can I get your phone # to set up a time to see what you have.

Thanks, Scott

chevy_crusn · 01-18-2005, 07:17 PM

Sure thing. Send me an email: p.peterson@earthlink.net

Maybe I can take some pictures of any parts you guys are interested in.

matt_field · 01-18-2005, 07:24 PM

hey, im in MN, PM me maybe ill take the whole thing from ya. send me some pics im very very interested mjfield69@hotmail.com

72gord · 01-18-2005, 07:59 PM

Rear spring to frame mounts or even the whole frame if you part it out and the frame isn't rusted out too.

da-burb · 01-18-2005, 08:33 PM

me too!! half ton or 3/4 ton? I am looking for a spare 3/4 ton Eaton rear center section.

Rod · 01-18-2005, 09:16 PM

Parts request.

How about front springs..are they 3 leaf type?....also the hangers off the frame to hold the front spring rad cradle one and rear one . Making a 2wd into a 4wd. Need the up front parts....perhaps an engine cross member and a tranny crossmember also... transfer case bracket off frame. NP 205 adapter and sleeve.

Is this a 4 spd or automatic 4x4?

Rod

chevytruckranch@hotmail.com

badpeanut · 01-18-2005, 10:18 PM

If it is a 1/2-ton with a 12-bolt rearend, what is the ratio? Open or posi?

4bynut · 01-19-2005, 06:08 AM

Quote:

Originally Posted by da-burb

me too!! half ton or 3/4 ton? I am looking for a spare 3/4 ton Eaton rear center section.

How many you want? I have a couple. Jason

chevy_crusn · 01-19-2005, 07:25 PM

Thanks for the questions, hope this info answers some of'em:

K20 3/4 ton
10 bolt posi
Good glass all around
4x4 4spd transmission/transfer case
Heavy duty front suspension
Working gauges
Interior okay, but body is shot and the box has been removed.

da-burb · 01-20-2005, 10:11 AM

PM sent

hare56g · 01-20-2005, 12:20 PM

I'd be very interested in the rolling chassis if you go that way. What kind of price would you be looking for?

chevy_crusn · 01-27-2005, 08:12 PM

Look'in to get $500.

Took a boring video of the transmission in motion ...I'm gonna need to pull the engine soon, too.

'69 Chevy K20 3/4 ton video

Thanks everyone!

chevy_crusn · 01-28-2005, 12:10 AM

Here's a close-up pic of the rear-end, springs and frame.
4.56 10 Bolt Rear-end Picture

chevy_crusn · 01-30-2005, 03:51 PM

I took the cover off and discovered that the HO52 rear-end is actually an 4.57 open differential, ...not a posi like I thought.
Sorry for the wrong info, to those who were interested.

01-18-2005, 06:59 PM	#1
chevy_crusn Registered User Join Date: Jan 2005 Location: Minneapolis, MN Posts: 7	Retiring 69' Chevy 4x4... ...most all the body panels have rust. I'll be using the 350 engine in my Chevelle, but I plan on removing the drive train to make available before I have it hauled away. If anyone has a need for parts, let me know.

01-18-2005, 07:02 PM	#2
booth Active Member Join Date: Feb 2003 Location: Lonsdale, MN Posts: 109	Where are you located I'm just south of Minneapolis in New Market. I would be interested in seeing what you've got. Thanks, Paul You've got a PM Last edited by booth; 01-18-2005 at 07:05 PM.

01-18-2005, 07:24 PM	#6
matt_field Registered User Join Date: Apr 2001 Location: Detroit Lakes, Minnesota Posts: 885	hey, im in MN, PM me maybe ill take the whole thing from ya. send me some pics im very very interested mjfield69@hotmail.com __________________ 1971 k5 blazer 80k mike survivor 1972 3/4 ton 4wd Cummins 12v 1967 swb 2wd 427bbc 1968 4wd shortbox 1971 Cheyenne swb k10 unrestored 1971 Cheyenne super 40k 402bb survivor 1967 Chevy k10 (first truck) 1968 L78 camaro survivor 18k miles 1969 z28 survivor 60k miles 1969 z28 survivor 39k miles 1969 z28 rs survivor 80k miles

01-18-2005, 08:33 PM	#8
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	me too!! half ton or 3/4 ton? I am looking for a spare 3/4 ton Eaton rear center section. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

01-18-2005, 09:16 PM	#9
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Parts request. How about front springs..are they 3 leaf type?....also the hangers off the frame to hold the front spring rad cradle one and rear one . Making a 2wd into a 4wd. Need the up front parts....perhaps an engine cross member and a tranny crossmember also... transfer case bracket off frame. NP 205 adapter and sleeve. Is this a 4 spd or automatic 4x4? Rod chevytruckranch@hotmail.com __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

01-18-2005, 07:06 PM	#3
chevy_crusn Registered User Join Date: Jan 2005 Location: Minneapolis, MN Posts: 7	Hi Paul, I'm in St. Louis Park. I just got done taking it around the block one last time.

01-18-2005, 07:10 PM	#4
72 Cheyenne K20 Registered User Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	I'm interested also, live in Owatonna, work in Burnsville and Apple Valley. Can I get your phone # to set up a time to see what you have. Thanks, Scott

01-18-2005, 07:17 PM	#5
chevy_crusn Registered User Join Date: Jan 2005 Location: Minneapolis, MN Posts: 7	Sure thing. Send me an email: p.peterson@earthlink.net Maybe I can take some pictures of any parts you guys are interested in.

01-18-2005, 07:59 PM	#7
72gord Never enough time!! Join Date: Mar 2004 Location: sw Wisconsin Posts: 601	Rear spring to frame mounts or even the whole frame if you part it out and the frame isn't rusted out too.

01-18-2005, 10:18 PM	#10
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	If it is a 1/2-ton with a 12-bolt rearend, what is the ratio? Open or posi?

01-19-2005, 07:25 PM	#12
chevy_crusn Registered User Join Date: Jan 2005 Location: Minneapolis, MN Posts: 7	Thanks for the questions, hope this info answers some of'em: K20 3/4 ton 10 bolt posi Good glass all around 4x4 4spd transmission/transfer case Heavy duty front suspension Working gauges Interior okay, but body is shot and the box has been removed.

01-20-2005, 10:11 AM	#13
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	PM sent __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

01-20-2005, 12:20 PM	#14
hare56g Registered User Join Date: Dec 2004 Location: Janesville WI Posts: 6	I'd be very interested in the rolling chassis if you go that way. What kind of price would you be looking for?

01-27-2005, 08:12 PM	#15
chevy_crusn Registered User Join Date: Jan 2005 Location: Minneapolis, MN Posts: 7	Look'in to get $500. Took a boring video of the transmission in motion ...I'm gonna need to pull the engine soon, too. '69 Chevy K20 3/4 ton video Thanks everyone!

01-28-2005, 12:10 AM	#16
chevy_crusn Registered User Join Date: Jan 2005 Location: Minneapolis, MN Posts: 7	Here's a close-up pic of the rear-end, springs and frame. 4.56 10 Bolt Rear-end Picture



Register or Log In To remove these advertisements.

01-30-2005, 03:51 PM	#17
chevy_crusn Registered User Join Date: Jan 2005 Location: Minneapolis, MN Posts: 7	I took the cover off and discovered that the HO52 rear-end is actually an 4.57 open differential, ...not a posi like I thought. Sorry for the wrong info, to those who were interested.

Register or Log In To remove these advertisements.