72' C10 SWB Airbagged etc F/S OR TRADE - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PrimeredThunder · 01-19-2005, 04:43 PM

The Truck is still available...price lowered again to $7500 CA$H! Or Trade for a 67-87 SWB truck (lifted or lowered...just not stock

) Or GM muscle car? I'm looking for a new toy...

Check out the info and pics, email me for more info...
maxximus_thunder@yahoo.com

Kenny

****** Truck Information ******
General
Manufacturer: GM / Chevrolet
Year: 1972
Model: 1⁄2 Ton SWB Pickup

Chassis

Suspension type: Air Ride
Front Brakes: Stock Disc
Modifications: The front was put together using Air Ride Technologies Brackets and Firestone Air Springs, also running a front Sway bar. The Rear consists of Air Ride Technologies Brackets and Firestone Air Springs. I also modified the stock tracking-bar and mount to keep the rear-end centered with the amount of suspension drop.
Rear Brakes: Stock Drum
Steering: Stock GM Power Steering
Front and rear tire/wheel type: Allied Series 62 Chrome Rallye Wheels, 15x8 front/15x10 rear
Rear differential type / Gears: 12-Bolt Open 3.07

Body
Color Scheme: Solid GM Torch Red Paint
Modifications: Shaved Gas Filler (Tank Relocated to Rear), Trenz Billet Grille Insert
Paint Type: Single Stage

Interior

Color: Black
Seats: Honda Accord Buckets
Material: Cloth
Upholsterer: All interior was done myself
Wiring: Stock
Modifications: I built a custom Center Console from Plywood and covered it in black Speaker-box material. The seats were mounted using boxed 2x1 steel tubing. Currently the Air Compressor and Storage tank are located behind the seats in the cab as well.
Steering wheel/Column: Newer GM Steering Wheel, Non-Tilt stock Column
Stereo/Speakers/Amps: Panasonic CD Head Unit, Sony X-Plod 6x9 Speakers
Instrument Gauges: Wood-grain gauge bezel, vDo tach

Engine

Cubic Inch: 350 ci.
Manufacturer: Chevrolet
Camshaft: RV Stage 2
Cylinder heads: Rebuilt GM with 1.94 intake valves
Valve Covers: Edelbrock Signature
Intake Manifold: Edelbrock Performer
Ignition System: Stock HEI, Mallory wires
Exhaust type: Heddman Full-Length Headers, custom-bent Aluminized 2 1⁄2” Exhaust with Flowmaster 40 Series mufflers.

Transmission

Automatic / Standard: GM TH350 3spd Auto
Torque Converter: B&M Holeshot 2200 RPM Stall
Modifications: B&M stage 1 shift-kit
Shifter type: Stock Column
Drive Shaft: Stock two-piece

PrimeredThunder · 01-19-2005, 04:47 PM

Heres the pics...

floyd · 01-19-2005, 10:41 PM

Sweet looking ride!Is it all the way down in the pics?If not what does it look like all the way up or down?

PrimeredThunder · 01-20-2005, 02:41 PM

Ttt

Ptown72Chevy · 01-21-2005, 02:31 PM

god i love that truck!!! if it wasn't such so much work to get both my trucks sold i'd be all over it.. maybe if you still have it in a couple month i'll have my 67 nova finished to try and trade ya lol.. good luck, its a beautiful truck

Ptown72Chevy · 01-21-2005, 03:46 PM

is it still for sale??? i'm going to look into sellin my truck.. let me know asap.. norcalchevy12@aol.com

Deuce · 01-21-2005, 06:15 PM

Quote:

Originally Posted by Ptown72Chevy

god i love that truck!!! if it wasn't such so much work to get both my trucks sold i'd be all over it.. maybe if you still have it in a couple month i'll have my 67 nova finished to try and trade ya lol.. good luck, its a beautiful truck

You have a 67 Nova project!! post some pics!! I LOVE THOSE CARS

Ptown72Chevy · 01-21-2005, 06:46 PM

i dont want to whore this guys thread... send me your e-mail address and i'll send them to ya. norcalchevy12@aol.com
P.S. I AM VERY INTERESTED IN THIS TRUCK IF ITS STILL FOR SALE...

PrimeredThunder · 01-22-2005, 01:05 AM

Ptown72Chevy;
YGM, and yes it is still forsale...and go ahead and post pics of that nova...maybe we could work someting out...

Kenny

Deuce · 01-22-2005, 01:22 AM

Quote:

Originally Posted by PrimeredThunder

Ptown72Chevy;
YGM, and yes it is still forsale...and go ahead and post pics of that nova...maybe we could work someting out...

Kenny

There ya go!! Post away!!

Ptown72Chevy · 01-22-2005, 11:03 AM

..

PrimeredThunder · 01-30-2005, 05:37 PM

TTT-Truck is still available...motivated seller...

Kenny

PrimeredThunder · 02-05-2005, 04:51 PM

TTT - Truck is still available..lookin to sell soon or trade for a custom that gets better MPG...goin to school in Arizona in August!

Kenny

PrimeredThunder · 02-08-2005, 12:00 AM

Ttt

QKENUF4U · 02-08-2005, 01:38 AM

where are in arizona and what school ?
oh SWEEEEEEEEEEEETTTTTTTTTTTTTTT TRUCK. would love to have it but its very impractical for me. lol

PrimeredThunder · 02-08-2005, 03:36 AM

Thanks,
I'm going to UTI in Avendale starting in the begining of August...pretty excited to get going...hopefully I'll find a nice bagged' mini-truck or similar to drive while I'm down there...

Kenny

cheyenne10 · 02-08-2005, 11:34 AM

Congrats Kenny, you will get through program in no time. I had a friend years ago that zipped through heating/ac program at PTI I think it was and had a blast down there in AZ. He hasn't looked back and got right into his trade with very good wages. He drove VW bug. Wishes he had car with AC, it is warmer down there than here by a bunch. Starting in August and with 9 month program (if its that) you should be timing it right.

Mini with AC!! Just don't forget your friends here with 67-72 Gm trucks.

Keep us posted on your prgram direction. You never know who you might meet on here that may have jobs some day!

PrimeredThunder · 02-08-2005, 02:37 PM

Bob;
Thanks for the congrats! I can't wait to get down there! I'm going to be doing the Automotive/Deseil/F*RD (LOL) Factory program, should take me 22 months to complete...so I'll be down there for a while! I'll keep in mind that A/C....thanks again!

BTW POTENTIAL BUYERS ETC PLEASE READ:

I am driving down to Arizona tomorrow morning (Wed. Feb 9) and wont be back to a computer until Sunday or monday....how ever I'll be periodically checking my email today and you can call me anytime on my cell to talk about the truck (I'll have my phone on me at all times) my cell number is 503-559-8962!
Thanks!
Kenny

PrimeredThunder · 02-08-2005, 09:30 PM

TTT- fast moving forum!

PrimeredThunder · 03-08-2005, 04:34 PM

Sold

Deuce · 03-08-2005, 06:04 PM

Quote:

Originally Posted by PrimeredThunder

Sold

Board Member bought it??

silvertonguedevil · 03-08-2005, 10:01 PM

Whoa! Who bought it?

PrimeredThunder · 03-08-2005, 11:31 PM

Actually its been a few weeks since I sold it...A guy up in Eagle creek bought it, so its still in the general area. Hard to see it go, but There will be others

longnlow72 · 03-08-2005, 11:56 PM

i would never sell my truck to someone near me lol, id hate to see HIM drivin it aroud

Deuce · 03-09-2005, 01:28 AM

Quote:

Originally Posted by longnlow72

i would never sell my truck to someone near me lol, id hate to see HIM drivin it aroud

That would make me CRY!!

Congrats on the sale though.

01-19-2005, 04:43 PM	#1
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	72' C10 SWB Airbagged etc F/S OR TRADE The Truck is still available...price lowered again to $7500 CA$H! Or Trade for a 67-87 SWB truck (lifted or lowered...just not stock ) Or GM muscle car? I'm looking for a new toy... Check out the info and pics, email me for more info... maxximus_thunder@yahoo.com Kenny **** Truck Information **** General Manufacturer: GM / Chevrolet Year: 1972 Model: 1⁄2 Ton SWB Pickup Chassis Suspension type: Air Ride Front Brakes: Stock Disc Modifications: The front was put together using Air Ride Technologies Brackets and Firestone Air Springs, also running a front Sway bar. The Rear consists of Air Ride Technologies Brackets and Firestone Air Springs. I also modified the stock tracking-bar and mount to keep the rear-end centered with the amount of suspension drop. Rear Brakes: Stock Drum Steering: Stock GM Power Steering Front and rear tire/wheel type: Allied Series 62 Chrome Rallye Wheels, 15x8 front/15x10 rear Rear differential type / Gears: 12-Bolt Open 3.07 Body Color Scheme: Solid GM Torch Red Paint Modifications: Shaved Gas Filler (Tank Relocated to Rear), Trenz Billet Grille Insert Paint Type: Single Stage Interior Color: Black Seats: Honda Accord Buckets Material: Cloth Upholsterer: All interior was done myself Wiring: Stock Modifications: I built a custom Center Console from Plywood and covered it in black Speaker-box material. The seats were mounted using boxed 2x1 steel tubing. Currently the Air Compressor and Storage tank are located behind the seats in the cab as well. Steering wheel/Column: Newer GM Steering Wheel, Non-Tilt stock Column Stereo/Speakers/Amps: Panasonic CD Head Unit, Sony X-Plod 6x9 Speakers Instrument Gauges: Wood-grain gauge bezel, vDo tach Engine Cubic Inch: 350 ci. Manufacturer: Chevrolet Camshaft: RV Stage 2 Cylinder heads: Rebuilt GM with 1.94 intake valves Valve Covers: Edelbrock Signature Intake Manifold: Edelbrock Performer Ignition System: Stock HEI, Mallory wires Exhaust type: Heddman Full-Length Headers, custom-bent Aluminized 2 1⁄2” Exhaust with Flowmaster 40 Series mufflers. Transmission Automatic / Standard: GM TH350 3spd Auto Torque Converter: B&M Holeshot 2200 RPM Stall Modifications: B&M stage 1 shift-kit Shifter type: Stock Column Drive Shaft: Stock two-piece __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon Last edited by PrimeredThunder; 01-21-2005 at 03:31 PM.

01-19-2005, 04:47 PM	#2
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Heres the pics... Attached Images __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

01-20-2005, 02:41 PM	#4
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Ttt __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

01-22-2005, 01:05 AM	#9
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Ptown72Chevy; YGM, and yes it is still forsale...and go ahead and post pics of that nova...maybe we could work someting out... Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

01-22-2005, 11:03 AM	#11
Ptown72Chevy Registered User Join Date: Feb 2004 Location: BAY AREA!! Posts: 44	.. Attached Images

01-19-2005, 10:41 PM	#3
floyd Registered User Join Date: Jan 2005 Location: Reno eNVy Posts: 87	Sweet looking ride!Is it all the way down in the pics?If not what does it look like all the way up or down?

01-21-2005, 02:31 PM	#5
Ptown72Chevy Registered User Join Date: Feb 2004 Location: BAY AREA!! Posts: 44	god i love that truck!!! if it wasn't such so much work to get both my trucks sold i'd be all over it.. maybe if you still have it in a couple month i'll have my 67 nova finished to try and trade ya lol.. good luck, its a beautiful truck

01-21-2005, 03:46 PM	#6
Ptown72Chevy Registered User Join Date: Feb 2004 Location: BAY AREA!! Posts: 44	is it still for sale??? i'm going to look into sellin my truck.. let me know asap.. norcalchevy12@aol.com

01-21-2005, 06:46 PM	#8
Ptown72Chevy Registered User Join Date: Feb 2004 Location: BAY AREA!! Posts: 44	i dont want to whore this guys thread... send me your e-mail address and i'll send them to ya. norcalchevy12@aol.com P.S. I AM VERY INTERESTED IN THIS TRUCK IF ITS STILL FOR SALE...

01-30-2005, 05:37 PM	#12
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	TTT-Truck is still available...motivated seller... Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

02-05-2005, 04:51 PM	#13
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	TTT - Truck is still available..lookin to sell soon or trade for a custom that gets better MPG...goin to school in Arizona in August! Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

02-08-2005, 12:00 AM	#14
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Ttt __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

02-08-2005, 01:38 AM	#15
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	where are in arizona and what school ? oh SWEEEEEEEEEEEETTTTTTTTTTTTTTT TRUCK. would love to have it but its very impractical for me. lol

02-08-2005, 03:36 AM	#16
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Thanks, I'm going to UTI in Avendale starting in the begining of August...pretty excited to get going...hopefully I'll find a nice bagged' mini-truck or similar to drive while I'm down there... Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

02-08-2005, 11:34 AM	#17
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	what will be your program? Congrats Kenny, you will get through program in no time. I had a friend years ago that zipped through heating/ac program at PTI I think it was and had a blast down there in AZ. He hasn't looked back and got right into his trade with very good wages. He drove VW bug. Wishes he had car with AC, it is warmer down there than here by a bunch. Starting in August and with 9 month program (if its that) you should be timing it right. Mini with AC!! Just don't forget your friends here with 67-72 Gm trucks. Keep us posted on your prgram direction. You never know who you might meet on here that may have jobs some day! __________________ Bob



Register or Log In To remove these advertisements.

02-08-2005, 02:37 PM	#18
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Bob; Thanks for the congrats! I can't wait to get down there! I'm going to be doing the Automotive/Deseil/F*RD (LOL) Factory program, should take me 22 months to complete...so I'll be down there for a while! I'll keep in mind that A/C....thanks again! BTW POTENTIAL BUYERS ETC PLEASE READ: I am driving down to Arizona tomorrow morning (Wed. Feb 9) and wont be back to a computer until Sunday or monday....how ever I'll be periodically checking my email today and you can call me anytime on my cell to talk about the truck (I'll have my phone on me at all times) my cell number is 503-559-8962! Thanks! Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

02-08-2005, 09:30 PM	#19
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	TTT- fast moving forum! __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

03-08-2005, 04:34 PM	#20
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Sold __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

03-08-2005, 10:01 PM	#22
silvertonguedevil Senior Member Join Date: May 2004 Location: Seaside, Oregon Posts: 1,789	Whoa! Who bought it? __________________ -Greg My Chevy trucks, past and present: 1962 C10 SB Fleetside 1964 C10 LB Fleetside BBW 1966 C10 SB Fleetside 1966 C10 SB Fleetside BBW 1968 C10 SB Fleetside 1971 C10 LB Fleetside 1971 C10 SB Fleetside 1972 C10 SB Fleetside Cheyenne 1972 C10 SB Fleetside Cheyenne Super 1972 C10 LB Fleetside Cheyenne Super 1974 C20 Cheyenne 1979 K5 Blazer Cheyenne 1982 K10 SB Fleetside Custom Deluxe 1982 K10 SB Fleetside Scottsdale 1986 C10 SB Fleetside Silverado 2008 Silverado 1500 4x4

03-08-2005, 11:31 PM	#23
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Actually its been a few weeks since I sold it...A guy up in Eagle creek bought it, so its still in the general area. Hard to see it go, but There will be others __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

03-08-2005, 11:56 PM	#24
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	i would never sell my truck to someone near me lol, id hate to see HIM drivin it aroud __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

Register or Log In To remove these advertisements.