whats it worth - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gr8one · 01-21-2005, 07:59 PM

i have a 1971 disk brake frame with coil rear. complete frame steering box drive shaft complete rolling chasis. no motor or tranny. im just wondering.

**BIG ORANGE** · 01-21-2005, 09:04 PM

Is it long or short? I would think the shorty's are worth more say around 400.00 give or take 100.00 depending on how much the need is!

gr8one · 01-21-2005, 09:45 PM

long bed in precect shape it was my daily driver but pulled the cab to put it on a short bed rides like a dream coils and trailing arms.

**special-K** · 01-23-2005, 08:05 AM

A rolling chassis should be worth $300-500 to the right person in need.But,that`s the thing.Along with location.They`d be getting alot for that and saving labor on dismantling.The lower the price,the easier the sale.Good Luck.

MOTHERTRUCKERS · 01-23-2005, 06:33 PM

We had short 71-2 rolling frames in our used section of our catalog for 200.00, 350.00 with posi for at least a year with nobody interested, I finally had so many we stripped them and cut up 12 in the first load and 19 long and short in the second load, needed the room for cabs and beds. Seems everybody is to far away even though we could ship a rolling frame anywhere east of the Misissippi for under 350.00.

01-21-2005, 07:59 PM	#1
gr8one Registered User Join Date: Nov 2004 Location: Fort Meade Fl Posts: 184	whats it worth i have a 1971 disk brake frame with coil rear. complete frame steering box drive shaft complete rolling chasis. no motor or tranny. im just wondering.

01-21-2005, 09:04 PM	#2
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,752	Is it long or short? I would think the shorty's are worth more say around 400.00 give or take 100.00 depending on how much the need is! __________________ Things happen for a reason!

01-23-2005, 08:05 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	A rolling chassis should be worth $300-500 to the right person in need.But,that`s the thing.Along with location.They`d be getting alot for that and saving labor on dismantling.The lower the price,the easier the sale.Good Luck. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-23-2005, 06:33 PM	#5
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	We had short 71-2 rolling frames in our used section of our catalog for 200.00, 350.00 with posi for at least a year with nobody interested, I finally had so many we stripped them and cut up 12 in the first load and 19 long and short in the second load, needed the room for cabs and beds. Seems everybody is to far away even though we could ship a rolling frame anywhere east of the Misissippi for under 350.00. __________________ Rest in Peace Ed. Thanks for all the good times.

01-21-2005, 09:45 PM	#3
gr8one Registered User Join Date: Nov 2004 Location: Fort Meade Fl Posts: 184	long bed in precect shape it was my daily driver but pulled the cab to put it on a short bed rides like a dream coils and trailing arms.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.