Whats it worth??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*SassyChevyGirl* · 01-23-2005, 03:29 PM

I have a 1971 GMC 2 wheel drive pickup. Has a 350 engine, 350 tranny, power disc brakes on the front, drum brakes in the rear, power steering, NO AIR! It has 2 1/2 in pipes with full boars and turn downs for the exhaust. It has 307 gears. The rockers and cab corners are rusty as well as the bottom of the right front fender.
Thanks for taking the time to look and answer this thread!

roj2323 · 01-23-2005, 03:48 PM

welcome to the board!

price really depends on location. personaly i would be willing to part with 1000-1500 for it. i would say more but the frame would likely need to be straightened from that fender bender.

where's the truck located? i'm currently looking for one

CHEVYE · 01-23-2005, 03:49 PM

that`d go for around $1200-$1500 here in tn. hope that helps.

*SassyChevyGirl* · 01-23-2005, 04:00 PM

Its in north central arkansas ........ and as skii stated the frame is not bent. It just looks bad.

roj2323 · 01-23-2005, 04:09 PM

it may not be bent but it could be skued off of square. it's really a minor issue and easy enough to fix if it needs it but that's the first thing that came to mind when i looked at it. other than the fender bender it's a really and i do mean really nice truck. i wish it was closer to chicago.
ondrew

**special-K** · 01-23-2005, 04:10 PM

Those prices sound right.Good thing there`s no rust in that left fender.Not a bad truck.Wuh happund?Hit a Razerback?

*SassyChevyGirl* · 01-23-2005, 04:18 PM

Ever heard of freezing fog? I was headed to the school to drop our boys off... pulled out of our drive way ... started acrossed the bridge and the a$$ end started coming around on me and when I tried to correct it it just started spinning and didnt stop till the other end of the bridge when we hit the guard rail. It really sucks cuz it was a "really" nice truck.

*SassyChevyGirl* · 01-23-2005, 04:22 PM

almost like trying to find a needle in a haystack

**special-K** · 01-23-2005, 06:54 PM

Looks fresh,had a feeling it was winter damage.I`ve been sideways on a one lane overhead bridge before,caught the right front.Your not sellin`it cuz of that little fender-bender,are you?

cableguy0 · 01-23-2005, 07:13 PM

i hope your not selling because of that minor damage you can get all the parts you need for it right here on this board whether used originals or new stuff from one of the suppliers

GMC AMI · 01-23-2005, 07:20 PM

Funny thing skii, both you and Sassy need the same front fender. The truck should be worth the 1000 you have on the window with no problem.

GMC AMI · 01-23-2005, 07:34 PM

I thought as much. There is a 68 chevy drivers on eBay right now http://cgi.ebay.com/ebaymotors/ws/eB...949676233&rd=1

LUV2XCLR8 · 01-23-2005, 07:39 PM

WELCOME 2 THE BOARD FROM WEST 10-UH-C

**Boog** · 01-23-2005, 08:01 PM

Sassy and Skii. A fella down in Austin, Ark just let one go for about $1200. I believe it was about a '70 Chevy long bed, 6 cyl, no power acc, straight body, usuall rust spots.
Your GMC is a nicer equipped truck than that one and other than that fender looks real good. If the engine and tranny run good you ought to be able to get 12 to 1500 for it with that fender replaced. Less with it like it is.
Find another fender. Keep it.

junkyardjohn · 01-23-2005, 08:29 PM

If It's A Good Dependable Truck, Heck I'd Slap A Fender On It & Drive It. If Your Dead Set On Selling It I'd Invest About 1/2 Hour Of Labour Get $2000 -$2500 For It Anyway.

John
(oh & Welcome)
ONCE YOU PULL THAT INNER & OUTER FENDER OFF, I'LL BET YOU CAN PULL THAT GRILL & BUMPER BACK OUT WEAR IT'S SUPOSED TO BE.

JOHN

*SassyChevyGirl* · 01-23-2005, 08:44 PM

I was looking at it this way... if I cant get at least 1000.00 outta it the way it sets then Ill just keep it!

**Boog** · 01-23-2005, 08:59 PM

Alright! Let's get to lookin for another fender for these folks. Can't let this truck go for something as small as a bent fender.
If you two scan these boards you will find a number of board members selling new and used parts for our trucks. I'm not sure just where you are but there are bound to be a few old trucks sitting around with parts to be had.
Anybody got some parts for these good folks?

junkyardjohn · 01-23-2005, 08:59 PM

I WISH I WAS CLOSER TO YOU GUYS. I BET I COULD MAKE THAT TRUCK RESPECTABLE LOOKING IN ABOUT AN HOUR & $125 FOR A INNER & OUTER FENDER.

JOHN

**Boog** · 01-23-2005, 09:05 PM

John, I'm not familiar with the GMCs but are the fenders the same as the Chevys?

junkyardjohn · 01-23-2005, 09:06 PM

I DON'T KNOW TOO MUCH ABOUT GMCs. WILL A 68 CHEVY FENDER FIT A 71 GMC??

JOHN

teeitup · 01-23-2005, 09:11 PM

$1000-$1500 here probably. I bet the rad support is bent too.

*SassyChevyGirl* · 01-23-2005, 09:17 PM

yes a 68 chevy will work .... or a 68-72 GMC

*SassyChevyGirl* · 01-23-2005, 09:23 PM

yeah the radiator support is bent and so is the inner fender ..... the main thing Im looking for is the fender .... Im sure hubby could straighten everything else.... Im sure he could straighten that fender to if he had the right equipment. We went and looked at a truck here ... guys said he wanted 25 bux a piece for the fenders .. but the whole bottom of the fender was gone .... so we decided against that one. I know in time I will find one ... its just having the funds and locating one at the same time ..LMAO

junkyardjohn · 01-23-2005, 09:29 PM

I KNOW I HAVE A LEFT INNER, & TOMORROW WHEN IT'S LIGHT OUT I SEE IF I HAVE AN EXTRA OUTER. IN THE MEAN TIME LOOK & SEE IF YOU NEED A RADIATOR SUPPORT ALSO. JOHN

**Boog** · 01-23-2005, 09:32 PM

Skii may be able to pull that bumper out most of the way then remove it and pull the lower part of the fender forward to straighten the core support and grill some. You can do a lot with a comealong and a tree. grin

01-23-2005, 03:29 PM	#1
SassyChevyGirl Account Suspended Join Date: Dec 2004 Location: somewhere over the rainbow Posts: 1,284	Whats it worth??? I have a 1971 GMC 2 wheel drive pickup. Has a 350 engine, 350 tranny, power disc brakes on the front, drum brakes in the rear, power steering, NO AIR! It has 2 1/2 in pipes with full boars and turn downs for the exhaust. It has 307 gears. The rockers and cab corners are rusty as well as the bottom of the right front fender. Thanks for taking the time to look and answer this thread! Last edited by SassyChevyGirl; 02-23-2006 at 10:16 AM.

01-23-2005, 03:49 PM	#3
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	that`d go for around $1200-$1500 here in tn. hope that helps. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

01-23-2005, 04:10 PM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Those prices sound right.Good thing there`s no rust in that left fender.Not a bad truck.Wuh happund?Hit a Razerback? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-23-2005, 06:54 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Looks fresh,had a feeling it was winter damage.I`ve been sideways on a one lane overhead bridge before,caught the right front.Your not sellin`it cuz of that little fender-bender,are you? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-23-2005, 07:13 PM	#10
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,950	i hope your not selling because of that minor damage you can get all the parts you need for it right here on this board whether used originals or new stuff from one of the suppliers __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

01-23-2005, 03:48 PM	#2
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	welcome to the board! price really depends on location. personaly i would be willing to part with 1000-1500 for it. i would say more but the frame would likely need to be straightened from that fender bender. where's the truck located? i'm currently looking for one

01-23-2005, 04:00 PM	#4
SassyChevyGirl Account Suspended Join Date: Dec 2004 Location: somewhere over the rainbow Posts: 1,284	Its in north central arkansas ........ and as skii stated the frame is not bent. It just looks bad.

01-23-2005, 04:09 PM	#5
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	it may not be bent but it could be skued off of square. it's really a minor issue and easy enough to fix if it needs it but that's the first thing that came to mind when i looked at it. other than the fender bender it's a really and i do mean really nice truck. i wish it was closer to chicago. ondrew

01-23-2005, 04:18 PM	#7
SassyChevyGirl Account Suspended Join Date: Dec 2004 Location: somewhere over the rainbow Posts: 1,284	Ever heard of freezing fog? I was headed to the school to drop our boys off... pulled out of our drive way ... started acrossed the bridge and the a$$ end started coming around on me and when I tried to correct it it just started spinning and didnt stop till the other end of the bridge when we hit the guard rail. It really sucks cuz it was a "really" nice truck.

01-23-2005, 04:22 PM	#8
SassyChevyGirl Account Suspended Join Date: Dec 2004 Location: somewhere over the rainbow Posts: 1,284	almost like trying to find a needle in a haystack

01-23-2005, 07:20 PM	#11
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	Funny thing skii, both you and Sassy need the same front fender. The truck should be worth the 1000 you have on the window with no problem. __________________ 1968 Chevy 4x4 307 4 speed

01-23-2005, 07:34 PM	#12
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	I thought as much. There is a 68 chevy drivers on eBay right now http://cgi.ebay.com/ebaymotors/ws/eB...949676233&rd=1 __________________ 1968 Chevy 4x4 307 4 speed

01-23-2005, 07:39 PM	#13
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	WELCOME 2 THE BOARD FROM WEST 10-UH-C __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-23-2005, 08:01 PM	#14
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,132	Sassy and Skii. A fella down in Austin, Ark just let one go for about $1200. I believe it was about a '70 Chevy long bed, 6 cyl, no power acc, straight body, usuall rust spots. Your GMC is a nicer equipped truck than that one and other than that fender looks real good. If the engine and tranny run good you ought to be able to get 12 to 1500 for it with that fender replaced. Less with it like it is. Find another fender. Keep it. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

01-23-2005, 08:29 PM	#15
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	If It's A Good Dependable Truck, Heck I'd Slap A Fender On It & Drive It. If Your Dead Set On Selling It I'd Invest About 1/2 Hour Of Labour Get $2000 -$2500 For It Anyway. John (oh & Welcome) ONCE YOU PULL THAT INNER & OUTER FENDER OFF, I'LL BET YOU CAN PULL THAT GRILL & BUMPER BACK OUT WEAR IT'S SUPOSED TO BE. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST Last edited by junkyardjohn; 01-23-2005 at 08:44 PM.



Register or Log In To remove these advertisements.

01-23-2005, 08:44 PM	#16
SassyChevyGirl Account Suspended Join Date: Dec 2004 Location: somewhere over the rainbow Posts: 1,284	I was looking at it this way... if I cant get at least 1000.00 outta it the way it sets then Ill just keep it!

01-23-2005, 08:59 PM	#17
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,132	Alright! Let's get to lookin for another fender for these folks. Can't let this truck go for something as small as a bent fender. If you two scan these boards you will find a number of board members selling new and used parts for our trucks. I'm not sure just where you are but there are bound to be a few old trucks sitting around with parts to be had. Anybody got some parts for these good folks? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

01-23-2005, 09:05 PM	#19
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,132	John, I'm not familiar with the GMCs but are the fenders the same as the Chevys? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

01-23-2005, 09:06 PM	#20
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	I DON'T KNOW TOO MUCH ABOUT GMCs. WILL A 68 CHEVY FENDER FIT A 71 GMC?? JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

01-23-2005, 09:11 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	$1000-$1500 here probably. I bet the rad support is bent too. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-23-2005, 09:17 PM	#22
SassyChevyGirl Account Suspended Join Date: Dec 2004 Location: somewhere over the rainbow Posts: 1,284	yes a 68 chevy will work .... or a 68-72 GMC

01-23-2005, 09:23 PM	#23
SassyChevyGirl Account Suspended Join Date: Dec 2004 Location: somewhere over the rainbow Posts: 1,284	yeah the radiator support is bent and so is the inner fender ..... the main thing Im looking for is the fender .... Im sure hubby could straighten everything else.... Im sure he could straighten that fender to if he had the right equipment. We went and looked at a truck here ... guys said he wanted 25 bux a piece for the fenders .. but the whole bottom of the fender was gone .... so we decided against that one. I know in time I will find one ... its just having the funds and locating one at the same time ..LMAO

01-23-2005, 09:29 PM	#24
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	I KNOW I HAVE A LEFT INNER, & TOMORROW WHEN IT'S LIGHT OUT I SEE IF I HAVE AN EXTRA OUTER. IN THE MEAN TIME LOOK & SEE IF YOU NEED A RADIATOR SUPPORT ALSO. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

01-23-2005, 09:32 PM	#25
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,132	Skii may be able to pull that bumper out most of the way then remove it and pull the lower part of the fender forward to straighten the core support and grill some. You can do a lot with a comealong and a tree. grin __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

Register or Log In To remove these advertisements.