Inline 6 guys, I need help, step inside so we can talk - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 01-23-2005, 06:44 PM

I need a picture of an inline 6 in a 72 model truck.

I need a picture showing how the 72 model accelerator cable hooked up to the 6 cylinder engine.

My 292 engine originally came out of a 68 truck so it used a rod type of linkage. Now I need to figure out how to interface it to my cable type of acelerator in the 72 truck body I'm using.

I'd sure appreciate any help here,
Kevin

70 shorty · 01-23-2005, 07:49 PM

No help here, mine has that style accelerator, but has a Holley carb on a Clifford intake.

zeeklu · 01-23-2005, 08:11 PM

I have the holley carb and Clifford intake on mine too. Sorry. Chris

*Gee_Emm* · 01-23-2005, 08:16 PM

Tx Firefighter · 01-23-2005, 08:24 PM

Thanks for the pictures GM.

It looks like I have parts to round up now.

If you don't mind, I may "steal" your pictures to put in a wanted ad looking for the little brackets that I need.

MOTHERTRUCKERS · 01-23-2005, 08:49 PM

If you can't find them i think i still have a cable setup here, i know i have the brackets but not sure where the cable is because it was still hooked to the pedal.

Tx Firefighter · 01-23-2005, 08:52 PM

Mothertrucker, would my V8 cable be close enough to the right length to work?

*Gee_Emm* · 01-23-2005, 10:49 PM

I just dug the cable out of the garage today to clean it up.

**'68OrangeSunshine** · 01-24-2005, 05:14 AM

Tex, I went thru that situation, but I'm running a 4Bbl Holley on an Offy intake. L6 -292 -- '68 C/10 originally had a bellcrank -radius arm configuration. That was unsat, and would not get 1/2 WOT, besides being failure prone. I converted to a '72 accelerator pedal and linkage going to a Lokar-type cable from the fire wall to the carb. The upper arm of the stock gas pedal bail had to be bent around to match the firewall hole I used. Also needed a Jeg's throttle bracket w/return springs-- and had to cut 1-1/2" off the end to avoid the valve cover. But it works now and my bad orange machine is back on the road!
[Hey, where's the Bowtie smilie?]

MOTHERTRUCKERS · 01-24-2005, 06:13 AM

If i find it i'll compare it to the v8 cables i have.

Rod · 01-24-2005, 10:50 AM

This pic looks like 71-72 with automatic tranny cable kickdown also.

da-burb · 01-24-2005, 02:30 PM

at the current price you might want to buy this just for the parts you need. Assuming that they are there.

http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT

**PICKMUP** · 01-24-2005, 03:00 PM

Rod's pic is from a 72 250 wTH350. I sold that truck about 6 months ago.

*Gee_Emm* · 01-24-2005, 07:35 PM

Quote:

Originally Posted by Rod

This pic looks like 71-72 with automatic tranny cable kickdown also.

I am gonna have to do a setup like that for my TV cable. Anyone have one of those brackets or any ideas how to hook up the cable?

Hooter · 01-25-2005, 12:38 AM

if you cant find a setup like that on a 70-72, it looks Identical to 73 and up chevy trucks, my friends 79 is all like that too

oldschooloutlaw · 01-25-2005, 08:36 PM

man I dig Rods that craftsman choke

01-23-2005, 06:44 PM	#1
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Inline 6 guys, I need help, step inside so we can talk I need a picture of an inline 6 in a 72 model truck. I need a picture showing how the 72 model accelerator cable hooked up to the 6 cylinder engine. My 292 engine originally came out of a 68 truck so it used a rod type of linkage. Now I need to figure out how to interface it to my cable type of acelerator in the 72 truck body I'm using. I'd sure appreciate any help here, Kevin __________________ I'm on the Instagram- @Gearhead_Kevin

01-23-2005, 07:49 PM	#2
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,772	No help here, mine has that style accelerator, but has a Holley carb on a Clifford intake. __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

01-23-2005, 08:16 PM	#4
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Last edited by Gee_Emm; 01-23-2005 at 08:19 PM.

01-23-2005, 08:24 PM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Thanks for the pictures GM. It looks like I have parts to round up now. If you don't mind, I may "steal" your pictures to put in a wanted ad looking for the little brackets that I need. __________________ I'm on the Instagram- @Gearhead_Kevin

01-23-2005, 08:49 PM	#6
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	If you can't find them i think i still have a cable setup here, i know i have the brackets but not sure where the cable is because it was still hooked to the pedal. __________________ Rest in Peace Ed. Thanks for all the good times.

01-23-2005, 08:11 PM	#3
zeeklu Registered User Join Date: Dec 1999 Location: Northwest NJ Posts: 746	I have the holley carb and Clifford intake on mine too. Sorry. Chris

01-23-2005, 08:52 PM	#7
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Mothertrucker, would my V8 cable be close enough to the right length to work? __________________ I'm on the Instagram- @Gearhead_Kevin

01-23-2005, 10:49 PM	#8
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	I just dug the cable out of the garage today to clean it up.

01-24-2005, 05:14 AM	#9
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,504	Tex, I went thru that situation, but I'm running a 4Bbl Holley on an Offy intake. L6 -292 -- '68 C/10 originally had a bellcrank -radius arm configuration. That was unsat, and would not get 1/2 WOT, besides being failure prone. I converted to a '72 accelerator pedal and linkage going to a Lokar-type cable from the fire wall to the carb. The upper arm of the stock gas pedal bail had to be bent around to match the firewall hole I used. Also needed a Jeg's throttle bracket w/return springs-- and had to cut 1-1/2" off the end to avoid the valve cover. But it works now and my bad orange machine is back on the road! [Hey, where's the Bowtie smilie?] __________________ Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 01-24-2005 at 05:17 AM.

01-24-2005, 06:13 AM	#10
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	If i find it i'll compare it to the v8 cables i have. __________________ Rest in Peace Ed. Thanks for all the good times.

01-24-2005, 10:50 AM	#11
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	This pic looks like 71-72 with automatic tranny cable kickdown also. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

01-24-2005, 02:30 PM	#12
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	at the current price you might want to buy this just for the parts you need. Assuming that they are there. http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

01-24-2005, 03:00 PM	#13
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Rod's pic is from a 72 250 wTH350. I sold that truck about 6 months ago. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

01-25-2005, 12:38 AM	#15
Hooter My other Love Join Date: Aug 2001 Location: Castlegar B.C. Canada Posts: 4,085	if you cant find a setup like that on a 70-72, it looks Identical to 73 and up chevy trucks, my friends 79 is all like that too __________________ Castlegar B.C.The great white North (Canada Eh!) Hooter_5@hotmail.com First generation Monte Carlo club pictures of my life

01-25-2005, 08:36 PM	#16
oldschooloutlaw Registered User Join Date: Nov 2004 Location: Last big town in KY before the VA Line Posts: 66	man I dig Rods that craftsman choke __________________ Drive fast and Take Chances - In memory of Todd Rowe #725 Fire Chief 96 Chevy K1500 67 Chevelle 70 Chevy C10 - Old Red



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.