1967 Chevrolet : C-10 Custom Show - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffnstef · 01-25-2005, 04:23 PM

Very nice truck on eBay that you guys can "nit pick", I would like to start by saying that I dont like the floor of the bed ! I wish I had $20,000 to spend 1967 Chevrolet : C-10 Custom Show

**'70_402** · 01-25-2005, 04:26 PM

$20,000......um i might consider if it had a dash pad....but since it doesn't i can't buy it..

Bamm · 01-25-2005, 04:33 PM

I hate the inside of the bed, I'm more of a 3-4 maybe 4-6 at the most drop guy, but that is one sweet truck if it was a little higher. Not a fan of the wheels either. A+ truck though. If that was somebodies goal though, it might be worth it.

67ChevyRedneck · 01-25-2005, 04:35 PM

That is funny, all that money and they couldn't afford a dash pad???

GreyHoundSteve · 01-25-2005, 04:57 PM

ALOT of cool things done to that truck but like every custom ..... theres some things that just dont work for me. Nice work all the same and i certainly wouldnt be imbaresed to drive that bad boy.

**CPNE** · 01-25-2005, 05:03 PM

Quote:

Originally Posted by GreyHoundSteve

ALOT of cool things done to that truck but like every custom ..... theres some things that just dont work for me. Nice work all the same and i certainly wouldnt be imbaresed to drive that bad boy.

Until I went to Lowes and discovered I couldn't slide my 4x8 sheets of plywood in.

To each his/her own, but it's not for me

GreyHoundSteve · 01-25-2005, 05:15 PM

When i look at customs the big thing i look for is consitancy. If the owner accomplishes the look they are going for i applaud them even if its not my particular style.

The issues i have with this truck is that he states the truck is "fully shaved" yet you can clearly see the bumper bolts which i feel should have been shaved with the rest of the truck. I also think that it would have been in the owners best interest to cover the bed because it doesnt make any sense to me to have a open bed with a nonfuctional tailgate and so little bed space. It would have been better if he broke up the bed area into compartments and covered the whole thing for a smoother look. I also noticed that he has NO interior pictures which leads me to believe that $20,000 is a little too much to ask for an unfinished project. I would have also gone to a 1pc window and a solid rear window. It just doesnt make alot of since to me to smooth things like the cowl and and doors and then have vent windows and a rear sliding window.

Again, i dont want anyone to think that i dont LOVE THIS TRUCK because it certainly has alot going for it but for 20k the owner should have finished the job imho.

meathead95 · 01-25-2005, 05:37 PM

i kinda like the ass end of it

Bamm · 01-25-2005, 05:39 PM

Those taillights would last for, oh about 10 seconds with the way the cops are around here. Rightfully so, they are just too small. Steve, you have a good eye, I didn't even notice that the interior is probably not finished (looks like he has a red seat in it, doesn't exactly go with the all silver theme). And no wipers or signal lights in the front. Does North Carolina have an inspection? Ready to make a run for the border in Va.........Jerry

67ChevyRedneck · 01-25-2005, 05:42 PM

If we're gonna get real picky....for a 20K truck they should have paid more attention to body panel alignment. Look at pass fender & door. Not saying I could do better, I know I can't....but for 20K you'd better have your A game goin on.

**smitty62** · 01-25-2005, 05:43 PM

Quote:

Originally Posted by jeffnstef

Very nice truck on eBay that you guys can "nit pick", I would like to start by saying that I dont like the floor of the bed ! I wish I had $20,000 to spend 1967 Chevrolet : C-10 Custom Show

So do I, but it sure wouldn't be on that POS. Just because you can do something doesn't mean you should!

Bamm · 01-25-2005, 06:41 PM

"POS" is a little hard wouldn't you think, Smitty? I mean, after looking at the body and stuff closer, I realize its not a $20K machine, but far from a "POS". It's still a $10K truck IMO. Sure it needs some more time spent on it, but a nice truck nonetheless.......Jerry

**Palf70Step** · 01-25-2005, 06:57 PM

They did a lot of good work on it, not my style, but it needs the finishing details to bring out that kind of price.

LUV2XCLR8 · 01-25-2005, 07:16 PM

Quote:

Originally Posted by meathead95

i kinda like the ass end of it

ME 2, EXCEPT THE LICENSE PLATE BOX

Bamm · 01-25-2005, 08:06 PM

They did a lot of good work on it, not my style, but it needs the finishing details to bring out that kind of price.

I agree....

ME 2, EXCEPT THE LICENSE PLATE BOX

Yeah, I would have had it frenched at the bottom in the center........Jerry

longnlow72 · 01-25-2005, 09:31 PM

i like everything bit the firewall, dash pad would be nice but i can do that anytime

67ChevyC10Stepside · 01-25-2005, 09:35 PM

it looks like lostwages truck.

flatblack67c-10 · 01-26-2005, 12:08 AM

Sweet truck, I really like ass end.

lost wages · 01-26-2005, 05:14 AM

it makes me sick everytime someone posts a link like this and all you guys pick it apart, no truck is exactly what YOU would have built but he didnt build it for you, attitudes like this are the reason i could care less about taking mine to shows, i see alot of trucks on this board that are junk but always get the "nice truck" reply, get real. If the person doesnt belong to the board you tear them apart, makes you people sound jealous. I can appreciate all custom or stock vehicles, some do look like **** but most of them that get picked apart on this board do not deserve it. sorry for the rant, i just hear it at shows all the time and its tiresome.

96blazr · 01-26-2005, 08:03 AM

I'm willing to bet his name is B-Rad and he needs money to pay for HVAC School, cause the rap/playa/gangsta career didn't work out.

This truck reminds me of the old saying: Welcome to 5 years ago!!

20K!? Maybe another B-Rad will buy it.

Buying something highly Customized, like this example, can bite you big time if you're not careful(dashpad). And who knows what lurks underneath that dropped body.
If he gets 20 for it, I'd like to meet the person who bought it, cause I got Beach front property in AZ. I'd like to sell him.

Bowtiefreak · 01-26-2005, 08:59 AM

Quote:

Originally Posted by lost wages

it makes me sick everytime someone posts a link like this and all you guys pick it apart, no truck is exactly what YOU would have built but he didnt build it for you, attitudes like this are the reason i could care less about taking mine to shows, i see alot of trucks on this board that are junk but always get the "nice truck" reply, get real. If the person doesnt belong to the board you tear them apart, makes you people sound jealous. I can appreciate all custom or stock vehicles, some do look like **** but most of them that get picked apart on this board do not deserve it. sorry for the rant, i just hear it at shows all the time and its tiresome.

I agree totally. I love this board but this is the one thing I truly dislike about it. This is one of the main reasons why I very seldom post pics of my truck. Trucks are built to the way that that individual built them for THEMSELVES not us on the board.

72BLAZERDUDE · 01-26-2005, 09:48 AM

I like the truck. I think it should have the interior finished for 20k. Biggest problem I have is fuel cell location. Looks to me like you would have a pretty good stretch with a gas pump hose over that bed side to fill it. I just dont like the idea of having to reach over that paint everytime I want to put gas in it.

bouncytruck · 01-26-2005, 12:44 PM

Quote:

Originally Posted by LUV2XCLR8

ME 2, EXCEPT THE LICENSE PLATE BOX

My thought exactly...

Overall, I really like it. It would be tought to get a truck to lay rockers. I'd ut on a bed cover though. If I had $20K to spend right now, it would be on a 2wd blazer...

shortymac83 · 01-26-2005, 01:13 PM

I like the frontend, and the wheels, and even the interior (what has been finished), however, that bed would HAVE to go. The floor is ugly, the gas tank should be hidden, and the tailgate should be functional. Besides, the rearend is just missing something...I odn't know what exactly, but it's hideous. However, get the full-size tub out of there, add the tailgate and hide the gas tank, and throw in a polished cherry bed, and THAT would be sexy.

bigcdawg99 · 01-26-2005, 01:13 PM

Overall I dig it. The silver with purple frame/brake booster looks sweet. On a full custom job like that, laying frame is the only way to go. Finish the interior, put a color matched hard toneau on it and that is one sweet @$$ truck! Ofcourse, this is coming from someone who doesn't have 20K just lying around.

01-25-2005, 04:23 PM	#1
jeffnstef Registered User Join Date: Dec 2004 Location: Manchester, NH Posts: 64	1967 Chevrolet : C-10 Custom Show Very nice truck on eBay that you guys can "nit pick", I would like to start by saying that I dont like the floor of the bed ! I wish I had $20,000 to spend 1967 Chevrolet : C-10 Custom Show

01-25-2005, 04:26 PM	#2
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	$20,000......um i might consider if it had a dash pad....but since it doesn't i can't buy it.. __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

01-25-2005, 04:33 PM	#3
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	I hate the inside of the bed, I'm more of a 3-4 maybe 4-6 at the most drop guy, but that is one sweet truck if it was a little higher. Not a fan of the wheels either. A+ truck though. If that was somebodies goal though, it might be worth it. __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-25-2005, 04:35 PM	#4
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	That is funny, all that money and they couldn't afford a dash pad??? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

01-25-2005, 05:37 PM	#8
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	i kinda like the ass end of it __________________ 72 2wd blazer 72 swb 4x4

01-25-2005, 04:57 PM	#5
GreyHoundSteve Registered User Join Date: Oct 2004 Location: DFW TX Posts: 769	ALOT of cool things done to that truck but like every custom ..... theres some things that just dont work for me. Nice work all the same and i certainly wouldnt be imbaresed to drive that bad boy.

01-25-2005, 05:15 PM	#7
GreyHoundSteve Registered User Join Date: Oct 2004 Location: DFW TX Posts: 769	When i look at customs the big thing i look for is consitancy. If the owner accomplishes the look they are going for i applaud them even if its not my particular style. The issues i have with this truck is that he states the truck is "fully shaved" yet you can clearly see the bumper bolts which i feel should have been shaved with the rest of the truck. I also think that it would have been in the owners best interest to cover the bed because it doesnt make any sense to me to have a open bed with a nonfuctional tailgate and so little bed space. It would have been better if he broke up the bed area into compartments and covered the whole thing for a smoother look. I also noticed that he has NO interior pictures which leads me to believe that $20,000 is a little too much to ask for an unfinished project. I would have also gone to a 1pc window and a solid rear window. It just doesnt make alot of since to me to smooth things like the cowl and and doors and then have vent windows and a rear sliding window. Again, i dont want anyone to think that i dont LOVE THIS TRUCK because it certainly has alot going for it but for 20k the owner should have finished the job imho.

01-25-2005, 05:39 PM	#9
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Those taillights would last for, oh about 10 seconds with the way the cops are around here. Rightfully so, they are just too small. Steve, you have a good eye, I didn't even notice that the interior is probably not finished (looks like he has a red seat in it, doesn't exactly go with the all silver theme). And no wipers or signal lights in the front. Does North Carolina have an inspection? Ready to make a run for the border in Va.........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-25-2005, 05:42 PM	#10
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	If we're gonna get real picky....for a 20K truck they should have paid more attention to body panel alignment. Look at pass fender & door. Not saying I could do better, I know I can't....but for 20K you'd better have your A game goin on. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

01-25-2005, 06:41 PM	#12
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	"POS" is a little hard wouldn't you think, Smitty? I mean, after looking at the body and stuff closer, I realize its not a $20K machine, but far from a "POS". It's still a $10K truck IMO. Sure it needs some more time spent on it, but a nice truck nonetheless.......Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-25-2005, 06:57 PM	#13
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,522	They did a lot of good work on it, not my style, but it needs the finishing details to bring out that kind of price. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-25-2005, 08:06 PM	#15
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	They did a lot of good work on it, not my style, but it needs the finishing details to bring out that kind of price. I agree.... ME 2, EXCEPT THE LICENSE PLATE BOX Yeah, I would have had it frenched at the bottom in the center........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

01-25-2005, 09:31 PM	#16
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	i like everything bit the firewall, dash pad would be nice but i can do that anytime __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

01-25-2005, 09:35 PM	#17
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	it looks like lostwages truck. __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

01-26-2005, 12:08 AM	#18
flatblack67c-10 Registered User Join Date: Nov 2004 Location: Dover, AR Posts: 120	Sweet truck, I really like ass end. __________________ was 67 chevy swb fleet now muticolored 69 step, 350/350, 3.73 posi, converted to 5 lug, torq thrust II 17x8 front 17x9.5 rear, factory air cab, fuel cell. future plans: shaved wiper cowl, shave stake pockets, phantom grille, and silver paint... 68 camaro ss396 project 54 f*rd project truck



Register or Log In To remove these advertisements.

01-26-2005, 05:14 AM	#19
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	it makes me sick everytime someone posts a link like this and all you guys pick it apart, no truck is exactly what YOU would have built but he didnt build it for you, attitudes like this are the reason i could care less about taking mine to shows, i see alot of trucks on this board that are junk but always get the "nice truck" reply, get real. If the person doesnt belong to the board you tear them apart, makes you people sound jealous. I can appreciate all custom or stock vehicles, some do look like **** but most of them that get picked apart on this board do not deserve it. sorry for the rant, i just hear it at shows all the time and its tiresome.

01-26-2005, 08:03 AM	#20
96blazr Registered User Join Date: Aug 2003 Location: VA Posts: 740	I'm willing to bet his name is B-Rad and he needs money to pay for HVAC School, cause the rap/playa/gangsta career didn't work out. This truck reminds me of the old saying: Welcome to 5 years ago!! 20K!? Maybe another B-Rad will buy it. Buying something highly Customized, like this example, can bite you big time if you're not careful(dashpad). And who knows what lurks underneath that dropped body. If he gets 20 for it, I'd like to meet the person who bought it, cause I got Beach front property in AZ. I'd like to sell him. __________________ 1968 SWB. GMPP 350/350 Turbo Trans, Edelbrock Performer & Carb. Hedman Hedders, Hooker Aerochambers Mufflers. Tuff Stuff Alternators. Remember, no matter where you go, There you are. Gary

01-26-2005, 09:48 AM	#22
72BLAZERDUDE Registered User Join Date: Jan 2002 Location: WATAUGA,TX Posts: 675	I like the truck. I think it should have the interior finished for 20k. Biggest problem I have is fuel cell location. Looks to me like you would have a pretty good stretch with a gas pump hose over that bed side to fill it. I just dont like the idea of having to reach over that paint everytime I want to put gas in it. __________________ 72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA

01-26-2005, 01:13 PM	#24
shortymac83 hmm... Join Date: Jan 2004 Location: Culver, Indiana Posts: 1,631	I like the frontend, and the wheels, and even the interior (what has been finished), however, that bed would HAVE to go. The floor is ugly, the gas tank should be hidden, and the tailgate should be functional. Besides, the rearend is just missing something...I odn't know what exactly, but it's hideous. However, get the full-size tub out of there, add the tailgate and hide the gas tank, and throw in a polished cherry bed, and THAT would be sexy. __________________ 1983 Oldsmobile Delta 88 1967 Chevy C-10 stripper www.fcrperformance.com - wanna go...faster? talk to FCR.

01-26-2005, 01:13 PM	#25
bigcdawg99 Registered User Join Date: Jan 2005 Location: Mesa, AZ Posts: 67	Overall I dig it. The silver with purple frame/brake booster looks sweet. On a full custom job like that, laying frame is the only way to go. Finish the interior, put a color matched hard toneau on it and that is one sweet @$$ truck! Ofcourse, this is coming from someone who doesn't have 20K just lying around. __________________ 71 GMC Shortbed Fleetside (under construction) "I like guns. You got a gun, you don't have to work out." Chris Rock

Register or Log In To remove these advertisements.