69 GMC Parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

4x4Bowhunter · 01-29-2005, 08:07 PM

Parting out 69 GMC l/b custom 1500 2wd.

I am keeping some parts for myself, but the whole thing has to go...this is a wyoming truck, so its decent, but not a rust-bucket.

only options are p/s, pdb, small block w/ automatic. these all go.

cab is decent, needs rocker panels on both sides, the corners are there, but definitely rusting through.

doors and glass are actually really good.

rear end is leaf sprung.

some trim is decent, but probably not worth shipping, depends on how bad you need it.

like I said, every part needs to go, including frame, suspension, everything.

no offer refused.

i will be posting pictures as i disassemble, so more to follow.

kndall · 01-29-2005, 08:20 PM

pm sent

4x4Bowhunter · 01-31-2005, 07:47 PM

i have quite a few pictures available, but they are too large to post.

the doors are actualy very, very good, no rust at all.

frame is solid and not rusty at all.

power steering is all there

the PDB are all there and operational.

glass, fenders, grills, everthing available and i really need to move this out of the garage!!

PM or email for pics!!

B

Super Duck · 01-31-2005, 09:39 PM

how nuch for the rear leaves? is it a half ton?

4x4Bowhunter · 02-01-2005, 12:31 AM

make me a somewhat decent offer and i will see what i can do.

keep in mind I still have to pull them and cart the frame off w/out suspension...

they are 1/2 ton and would you want the shackles, bolts, anything attached, etc? or just the springs themselves?

Thanks!

Super Duck · 02-01-2005, 01:21 AM

I am in no hurry I have some on the truck now. how about $30 plus ride when you are ready to pull them. that way you can still roll the truck

dave3156 · 02-01-2005, 02:10 AM

I'm interested in both doors. Send me some pictures to dave3156@yahoo.com Thanks

4x4Bowhunter · 02-01-2005, 08:51 AM

Super Duck:

works for me!

probably about a week out on pulling those, so i'll keep you posted!

4x4Bowhunter · 02-01-2005, 09:09 AM

Sent you an email, Dave. $100 each door plus shipping.

powell72 · 02-02-2005, 01:11 AM

4x4Bowhunter, I'm just south of Fort Collins and will be in Denver on saturday for the swap meet, can I meet up with you to take a look at maybe buying the whole truck?

4x4Bowhunter · 02-12-2005, 08:02 PM

If anyone is interested in power disc brakes, i am asking $150 for the power booster, master, prop valve, spindles, calipers and brackets.

Truck is heading to the scrap yard on tuesday, so dont be bashful!!

8door · 02-12-2005, 08:11 PM

If you pull front disc assy. I would be interested in center link, if it is a stock item. With being disc on a 69 I'm not sure.

01-29-2005, 08:07 PM	#1
4x4Bowhunter Registered User Join Date: Jan 2005 Location: Denver, CO Posts: 110	69 GMC Parting out Parting out 69 GMC l/b custom 1500 2wd. I am keeping some parts for myself, but the whole thing has to go...this is a wyoming truck, so its decent, but not a rust-bucket. only options are p/s, pdb, small block w/ automatic. these all go. cab is decent, needs rocker panels on both sides, the corners are there, but definitely rusting through. doors and glass are actually really good. rear end is leaf sprung. some trim is decent, but probably not worth shipping, depends on how bad you need it. like I said, every part needs to go, including frame, suspension, everything. no offer refused. i will be posting pictures as i disassemble, so more to follow.

01-31-2005, 07:47 PM	#3
4x4Bowhunter Registered User Join Date: Jan 2005 Location: Denver, CO Posts: 110	tons of pictures i have quite a few pictures available, but they are too large to post. the doors are actualy very, very good, no rust at all. frame is solid and not rusty at all. power steering is all there the PDB are all there and operational. glass, fenders, grills, everthing available and i really need to move this out of the garage!! PM or email for pics!! B Last edited by 4x4Bowhunter; 01-31-2005 at 08:02 PM. Reason: need to change

01-31-2005, 09:39 PM	#4
Super Duck Chevy Nuttttt Join Date: Sep 2004 Location: Santa Maria Ca. Posts: 568	how nuch for the rear leaves? is it a half ton? __________________ 67' Chev swb step side 69' SS elky 03' Chev ext cab 4X4 hey who lernt me to spell is there anything else?

02-01-2005, 12:31 AM	#5
4x4Bowhunter Registered User Join Date: Jan 2005 Location: Denver, CO Posts: 110	69 gmc parts: rear leaves make me a somewhat decent offer and i will see what i can do. keep in mind I still have to pull them and cart the frame off w/out suspension... they are 1/2 ton and would you want the shackles, bolts, anything attached, etc? or just the springs themselves? Thanks!

02-01-2005, 01:21 AM	#6
Super Duck Chevy Nuttttt Join Date: Sep 2004 Location: Santa Maria Ca. Posts: 568	I am in no hurry I have some on the truck now. how about $30 plus ride when you are ready to pull them. that way you can still roll the truck __________________ 67' Chev swb step side 69' SS elky 03' Chev ext cab 4X4 hey who lernt me to spell is there anything else?

01-29-2005, 08:20 PM	#2
kndall Registered User Join Date: Nov 2004 Location: Moore, OK..73160 Posts: 207	pm sent

02-01-2005, 02:10 AM	#7
dave3156 Registered User Join Date: Mar 2004 Location: St. Louis, MO Posts: 336	I'm interested in both doors. Send me some pictures to dave3156@yahoo.com Thanks

02-01-2005, 08:51 AM	#8
4x4Bowhunter Registered User Join Date: Jan 2005 Location: Denver, CO Posts: 110	Super Duck: works for me! probably about a week out on pulling those, so i'll keep you posted!

02-01-2005, 09:09 AM	#9
4x4Bowhunter Registered User Join Date: Jan 2005 Location: Denver, CO Posts: 110	Sent you an email, Dave. $100 each door plus shipping.

02-02-2005, 01:11 AM	#10
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	4x4Bowhunter, I'm just south of Fort Collins and will be in Denver on saturday for the swap meet, can I meet up with you to take a look at maybe buying the whole truck? __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

02-12-2005, 08:02 PM	#11
4x4Bowhunter Registered User Join Date: Jan 2005 Location: Denver, CO Posts: 110	69 Disc Brake Front end If anyone is interested in power disc brakes, i am asking $150 for the power booster, master, prop valve, spindles, calipers and brackets. Truck is heading to the scrap yard on tuesday, so dont be bashful!!

02-12-2005, 08:11 PM	#12
8door Not too old to learn Join Date: Mar 2004 Location: SoCal Posts: 617	If you pull front disc assy. I would be interested in center link, if it is a stock item. With being disc on a 69 I'm not sure. __________________ 1968 C10 a way to long restoration.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.